States we serve
California Insulation Contractor Insurance
California’s Contractors State License Board licenses insulation work under the C-2 Insulation and Acoustical classification, and the Division of Workers’ Compensation says all California employers must provide workers’ compensation benefits to their employees under California Labor Code Section 3700. This page sets out those rules and the safety, energy code and city permit rules around them.
California’s Contractors State License Board licenses insulation work under the C-2 Insulation and Acoustical classification, and the board says a license is needed when a project requires a building permit, uses additional workers, or reaches the contract total the board states. The Division of Workers’ Compensation says all California employers must provide workers’ compensation benefits to their employees under Labor Code Section 3700, bought from a licensed insurance company or the State Compensation Insurance Fund, and that employers may also have the option to self-insure. The sections below take those rules in turn, then the safety, energy code, material and city permit rules that reach an insulation crew. Our insulation business insurance page brings the coverage lines together.
The C-2 Insulation and Acoustical classification and the board’s permit, worker and contract-total test
The Contractors State License Board’s C-2 Insulation and Acoustical classification reads: “An insulation and acoustical contractor installs any insulating media and preformed architectural acoustical materials for the purpose of temperature and/or sound control.” The board prints the C-2 Insulation and Acoustical classification as a regulation, “832.02. Class C-2—Insulation and Acoustical Contractor”, in Title 16 of the California Code of Regulations, under the article headed “Classifications”.
On when the license applies, the Contractors State License Board’s page for license applicants says: “All businesses or individuals who construct or alter any building, highway, road, parking facility, railroad, excavation, or other structure in California must be licensed by the California Contractors State License Board (CSLB) if the project requires a building permit or uses any additional workers or the total cost (labor and materials) of one or more contracts on the project is $1,000 or more.” The Contractors State License Board’s same page also warns that “Work on a larger project, may not be broken down to smaller amounts” below the amount the board states “in an attempt to meet the” exemption. Business and Professions Code § 7048 also says the exemption does not apply to a person who “(2) Employs another person to perform, or assist in performing, the work or operation.”
Under the board’s classification rule, Title 16 § 830, “Contractors licensed in one classification shall be prohibited from contracting in the field of any other classification unless they are also licensed in that classification or are permitted to do so by Section 831.” Title 16 § 831 says work in other classifications is “incidental and supplemental” to a specialty contractor’s licensed work “if that work is essential to accomplish the work in which the contractor is classified.”
On unlicensed work, the Contractors State License Board says: “There are serious penalties for unlicensed contracting and the Contractors State License Board (CSLB) seriously pursues violators.” For the coverage line that sits beside the license, see our general liability page.
C-2 Insulation and Acoustical beside C-39 Roofing in the board’s classification text
The Contractors State License Board’s C-39 Roofing classification begins: “A roofing contractor installs products and repairs surfaces that seal, waterproof and weatherproof structures.” The Contractors State License Board’s C-39 Roofing classification says a roofing contractor’s work “is performed to prevent water or its derivatives, compounds or solids from penetrating such protection and gaining access to material or space beyond”, and lists “urethane foam” among the materials the contractor uses.
The § 7071.6 contractor’s bond and a surety licensed through the California Department of Insurance
Business and Professions Code § 7071.6, as the Contractors State License Board prints it, requires “that the applicant or licensee file or have on file a contractor’s bond in the sum” the section states. The board’s bond page says: “A Contractor’s Bond must be in place before CSLB can issue an active license, reactivate an inactive license, or renew an active license.” The board’s bond page says: “The bond must be written by a surety company licensed through the California Department of Insurance.”
Business and Professions Code § 7125 and the comp certificate on file with the license board
Business and Professions Code § 7125, as the board prints it, requires an applicant or licensee to “have on file at all times a current and valid Certificate of Workers’ Compensation Insurance or Certification of Self-Insurance in the applicant’s or licensee’s business name”, except where the section’s no-employee exemption applies. Under § 7125 (b), as the board prints it, the certificate rule “does not apply to an applicant or licensee who meets both of the following conditions”, among them that the applicant “Has no employees provided that the applicant or licensee files a statement with the board on a form prescribed by the registrar”; the further condition turns on the classifications the license holds, which the board’s law book lists. The board’s law book says: “If you don’t have employees, you must file an exemption from the workers’ compensation requirement unless you hold one of these classifications which requires you to carry workers’ compensation insurance: C-8 Concrete; C-20 Warm-Air Heating, Ventilating and Air-Conditioning; C-22 Asbestos Abatement; C-39 Roofing; C-61/D-49 Tree Service.”
The board lists what a licensee can file instead of a certificate: “Provide CSLB with a signed exemption, certifying that they have no employees at this time”. On hiring, the board says: “Upon employing anyone in a manner that is subject to the workers’ compensation laws of California, the exemption form on file will no longer be valid and you will be required to obtain and submit proof of workers’ compensation insurance coverage.” The board’s workers’ compensation page says: “Workers’ compensation coverage must be continuous. Failure to maintain workers’ compensation insurance coverage will result in the license being suspended.”
For a certificate of workers’ compensation insurance, the board says: “CSLB must be listed as the Certificate Holder.” The Contractors State License Board says licensees “must also, list up to the top three workers’ compensation classification codes for which the highest estimated payroll is reported on your policy”, citing BPC 7125.6. Those filing rules touch your workers’ compensation line.
The version of § 7125 now in the board’s law book is marked as repealed effective on the date the section states, and says: “This section shall remain in effect only until” that date, “and as of that date is repealed, unless a later enacted statute that is enacted before” it “deletes or extends that date.” The board’s law book also prints a § 7125 marked as operative effective on that same date, whose subdivision (b) reads: “This section does not apply to an applicant or licensee organized as a joint venture pursuant to Section 7029 that has no employees,” and which “shall become operative on” the date the section states.
Labor Code Section 3700, the Division of Workers’ Compensation and the State Compensation Insurance Fund
The Division of Workers’ Compensation’s answers for employers say: “All California employers must provide workers’ compensation benefits to their employees under California Labor Code Section 3700. If a business employs one or more employees, then it must satisfy the requirement of the law.” For contractors based in other states, the Division of Workers’ Compensation’s employer page says: “If you are an out-of-state employer you may need workers’ compensation coverage if you have any employees regularly working in California, or if you enter into a contract of employment here.”
On where coverage comes from, the Division of Workers’ Compensation says employers buy it from a licensed insurance company or from the State Compensation Insurance Fund, and that “Employers may also have the option to self-insure for workers’ compensation.” Insurance Code § 11770 says “The State Compensation Insurance Fund is continued in existence, to be administered by its board of directors for the purpose of transacting workers’ compensation insurance”. Insurance Code § 11773, read on the Legislature’s site, says in full: “The fund shall be organized as a public enterprise fund.”
The Division of Workers’ Compensation says: “Failing to have workers’ compensation coverage is a criminal offense.” The Division says that if the state labor commissioner finds an employer without coverage, “a stop order will be issued. This order prohibits the use of employee labor until coverage is obtained”. The Division of Workers’ Compensation says: “Executive officers and directors of corporations must be included in workers’ compensation coverage, unless the corporation is fully owned by the directors and officers.” For the coverage line these Division rules govern, see our workers’ compensation coverage page.
Cal/OSHA’s Title 8 safety orders and the federal state plan at 29 CFR 1952.7
OSHA’s page on California’s state plan says “The California State Plan covers all private-sector places of employment within the state with the following exceptions”, and that “Federal OSHA covers the issues not covered by the California State Plan.” OSHA says “Cal/OSHA has adopted OSHA standards that relate to state and local government and private sector workplace operations.” Federal OSHA’s rule at 29 CFR 1952.7 says California’s state plan “covers all private-sector employers and employees, with several notable exceptions, as well as State and local government employers and employees, within the State”, so a private-sector insulation contractor in California works under the state plan, subject to those exceptions.
The state agency is described on its own site this way: “The Division of Occupational Safety and Health (DOSH), better known as Cal/OSHA, protects and improves the health and safety of workers in California”. Cal/OSHA’s construction rule, Title 8 § 1509, says: “Every employer shall establish, implement and maintain an effective Injury and Illness Prevention Program in accordance with section 3203 of the General Industry Safety Orders.” Cal/OSHA’s indoor heat rule, Title 8 § 3396, says “This section applies to all indoor work areas where the temperature equals or exceeds” the level the section states “when employees are present”, subject to the exceptions the section lists.
The 2025 Energy Code, quality insulation installation and the ECC-Rater
The California Energy Commission says: “Buildings whose permit applications are applied for on or after January 1, 2026, must comply with the 2025 Energy Code.” The Commission’s page for the current edition lists the code as “2025 Energy Code for Residential and Nonresidential Buildings”. The Commission says the Building Energy Efficiency Standards “include requirements in the Energy Code (Title 24, Part 6) and voluntary energy efficiency provisions in CALGreen (Title 24, Part 11)”.
The California Building Standards Commission says CALGreen’s appendix chapters hold voluntary options “for more stringent standards” beside its mandatory green building standards.
The Commission’s single-family residential compliance manual says the prescriptive requirements call “for QII in all climate zones for newly constructed buildings and additions”, with a size floor for additions that the manual states. The Commission’s single-family manual says: “All insulation shall be installed properly throughout the building. A third-party ECC-Rater is required to verify the integrity of the installed insulation.” The manual puts a duty on the installer: “The installer shall provide evidence to the ECC-Rater using compliance documentation that all insulation specified is installed to meet specified R-values and assembly U-factors.” The Commission’s manual names batts, loose-fill and spray foam under QII: “Framed assemblies include wood and steel construction insulated with batts of mineral fiber, mineral and natural wool, or cellulose; loose-fill insulation of mineral fiber, mineral and natural wool, cellulose, or spray polyurethane foam (SPF).” Batt and blown crews will find their side of this on our fiberglass insulation contractor insurance page.
On failed field tests, the Commission’s Energy Code Compliance Program page says: “If an ECC-Rater determines that a test fails compliance thresholds, the contractor is required to fix the feature or system until it passes compliance.”
Section 19165 certification, the § 19022 manufacturer rule and the Air Resources Board’s foam pages
Business and Professions Code § 19165, as the Bureau of Household Goods and Services prints it in its law book, says: “Insulation material may only be sold or installed in the state which has been certified by the manufacturer to have been tested in accordance with standards adopted by the bureau and which bears a visible bureau approved statement by the manufacturer certifying that the insulation material meets those standards and has been tested and approved by an approved testing laboratory.” The bureau’s directory says: “Any person selling uncertified insulation for installation in California violates state law.”
Section 19022 as the bureau prints it says an installer who uses insulation as intended, “without changing the thermal or physical properties of the insulation”, is not a manufacturer, with this condition: “provided that the manufacturer of the insulation material has been licensed in accordance with this chapter.” Spray foam crews can read how we approach their work on our spray foam insurance page.
The California Air Resources Board’s foams page lists “Foam blowing agents subject to the regulation, Prohibitions on Use of Certain Hydrofluorocarbons in Stationary Refrigeration, Stationary Air-conditioning, and Other End-Uses (HFC Regulation).”
The CPSC spray foam fact sheet, the EPA’s voluntary checklist and the FTC’s receipt rule on a California job
The U.S. Consumer Product Safety Commission’s spray foam fact sheet says high-pressure systems and low-pressure kits “contain isocyanates in Side A and a mixture of polyols, amine catalysts, flame retardants, blowing agents, and surfactants in Side B.” The Consumer Product Safety Commission’s fact sheet says: “Contractors should use safe work practices to reduce or prevent exposures to homeowners at every stage of SPF installation.” The EPA’s spray foam checklist says it “was prepared as a voluntary aid to protect against potential risks from SPF; it is not a regulatory compliance tool”, and adds that “some of the best practices included in the checklist may be required under local, state or federal worker protection or other regulations.” This homeowner-facing guidance touches your general liability line. Spray foam insulation crews can read how we approach their work on our spray foam insurance page.
The Federal Trade Commission’s R-value rule, 16 CFR 460.17, says: “If you are an installer, you must give your customers a contract or receipt for the insulation you install.” Under 16 CFR 460.17, “The receipt must be dated and signed by the installer.” Fiberglass and blown-in crews writing those receipts can see how we look at their work on our fiberglass insulation contractor insurance page.
Labor Code Section 3800 and Business and Professions Code § 7031.5 at the city permit counter, from Los Angeles to Riverside
Business and Professions Code § 7031.5, as the Contractors State License Board prints it, says a city or county that requires a building permit “shall also require that each applicant for such a permit file as a condition precedent to the issuance of a permit a statement which he has prepared and” signed about licensure. For the vehicles that carry crews and material between sites, see our commercial auto page.
Los Angeles
The Los Angeles Department of Building and Safety’s notice to contractors says: “California Labor Code Section 3800 requires all contractors to show their valid certificate of workers’ compensation insurance at the time of each permit issuance. The certificate holder must be the contractor’s state license board.” The same bulletin exempts applicants without employees from that certificate, and asks for a “Copy of your LA City business tax registration certificate or a newly paid receipt for one”.
San Diego
San Diego’s Development Services Department says that, for the project types it lists, “the permit holder shall provide updated information prior to the contractor or subcontractor performing any work under the construction permit”, under San Diego Municipal Code §129.0121. On those projects, among the items the page lists, the permit holder or applicant must ensure each contractor and subcontractor has current “Valid worker’s compensation insurance information, including policy number and expiration date”.
San Francisco
San Francisco’s permit page says: “Only property owners, state-licensed contractors, or their agents may apply for a building permit.” For permit issuance, San Francisco says “We must verify information about your contractor to issue your building permit” and lists a “Certificate of Workman’s Compensation Insurance Coverage”, a “San Francisco business license” and a “State of California contractor’s license and classification (known as a pocket card)”.
Sacramento
The City of Sacramento says building permits can be issued to “Licensed contractors and must provide a Certificate of Workers Compensation Insurance.” It also says: “The City of Sacramento does not issue a general business license. Sacramento City Code Chapter 3.08 does require all businesses that operate in the City of Sacramento to obtain a Business Operations Tax certificate.”
Fresno
The City of Fresno’s permit application packet for its Standard Accessory Dwelling Unit (ADU) Program says “Section 3800 of the State Labor Code provides that every county or city which requires issuance of a permit as a condition precedent” to construction work shall require each applicant to have on file “A valid Certificate of Workers’ Compensation Insurance or,” a signed statement of a firm without employees, or “A Certificate of Consent to self-insure by the Director of Industrial Relations.”
Oakland
Oakland’s Bureau of Building says contractors need “A current State Contractor’s License in a classification that is appropriate for the type of work that the contractor will be performing.” Oakland’s Contractor’s Declaration form has the contractor affirm: “I have and will maintain workers’ compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued.”
Long Beach
Long Beach says permits are issued to “A licensed contractor who has a valid California State Contractor’s License and an active Long Beach Business License. If a contractor has employees, proof of Workers’ Compensation Insurance must be shown at the time of permit issuance.” Long Beach adds: “Contractors working alone may waive this requirement, but must show a pocket copy of their State Contractor’s License.”
Riverside
Riverside’s Building and Safety page says: “The appropriately licensed contractor must provide proof of licensing, available for verification through the California Contractors State Licensing Board and the contractor must obtain a current City of Riverside business license.” It adds: “Contractors State license law requires that all California licensed contractors maintain Workers’ Compensation Insurance coverage if they have employees. The law also requires that the contractor present the Workers’ Compensation Insurance Certificate to the Building and Safety Department at the time of permit issuance.”
Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.
- Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.
A chart of what California requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A state license or registration names insulation work; the law sets a threshold for when it applies. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The Energy Code, statewide, for residential and commercial buildings. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Required for covered employers, from the open market or the state fund; the law sets a threshold for which employers it covers. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.
California coverage, services and state offices
What we insure
Coverage lines
California insulation contractor insurance questions
California contractor license requirements for insulation work: which classification, and when is a license needed?
The Contractors State License Board’s C-2 Insulation and Acoustical classification reads: “An insulation and acoustical contractor installs any insulating media and preformed architectural acoustical materials for the purpose of temperature and/or sound control.” The board says: “All businesses or individuals who construct or alter any building, highway, road, parking facility, railroad, excavation, or other structure in California must be licensed by the California Contractors State License Board (CSLB) if the project requires a building permit or uses any additional workers or the total cost (labor and materials) of one or more contracts on the project is $1,000 or more.”
Is workers comp required in California under Labor Code Section 3700?
The Division of Workers’ Compensation says: “All California employers must provide workers’ compensation benefits to their employees under California Labor Code Section 3700. If a business employs one or more employees, then it must satisfy the requirement of the law.” On where coverage comes from, the Division says employers buy it from a licensed insurance company or from the State Compensation Insurance Fund, and that “Employers may also have the option to self-insure for workers’ compensation.”
California workers comp exemption: can a licensed insulation contractor without employees file one?
The Contractors State License Board lists what a licensee can file instead of a certificate: “Provide CSLB with a signed exemption, certifying that they have no employees at this time”. The board says a licensee cannot file the exemption if “Your license is qualified by a Responsible Managing Employee (RME).” On hiring, the board says: “Upon employing anyone in a manner that is subject to the workers’ compensation laws of California, the exemption form on file will no longer be valid and you will be required to obtain and submit proof of workers’ compensation insurance coverage.”
California energy code: which permit applications must meet the current edition, and what replaced the HERS Program?
The California Energy Commission says: “Buildings whose permit applications are applied for on or after January 1, 2026, must comply with the 2025 Energy Code.” The Commission’s page for the current edition lists the code as “2025 Energy Code for Residential and Nonresidential Buildings”. The California Energy Commission also says: “The Energy Code Compliance (ECC) Program is used to demonstrate compliance with all versions of the Energy Code when required for residential building projects. It replaces the HERS Program.”
California insulation requirements: does the material itself have to be certified?
The Bureau of Household Goods and Services’ directory says “all insulation sold and installed in California must be certified to be in compliance with California insulation quality standards (BPC § 19165).” The bureau’s directory says: “Any person selling uncertified insulation for installation in California violates state law.” It also says “some materials may have been certified or decertified after the directory was published” and that “The Bureau of Household Goods and Services maintains an up-to-date list of certified insulation materials.”
Spray foam insulation California rules: when is an installer treated as the manufacturer?
Under Business and Professions Code § 19022 as the Bureau of Household Goods and Services prints it, “Anyone who alters, substitutes, or recompounds any insulation product or material shall be considered to be the manufacturer of that particular insulation product.” For spray foam, § 19022 counts as alteration: “In the case of spray applied or foamed in place insulation, any addition to, substitution of, or deletion from, the chemical system provided by the insulation manufacturers.”
California home improvement license: does an insulation contractor need a license before bidding?
The Contractors State License Board says contractors, “including subcontractors, specialty contractors, and persons engaged in the business of home improvement (with the exception of joint ventures and projects involving federal funding) must be licensed before submitting bids.” Under the board’s classification rule, Title 16 § 830, “Contractors licensed in one classification shall be prohibited from contracting in the field of any other classification unless they are also licensed in that classification or are permitted to do so by Section 831.”
This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your California insulation work
Tell us the state you are based in, what you install, your number of field employees and the coverage you want to talk about for your California work.