States we serve
Texas Insulation Contractor Insurance
In Texas, except as otherwise provided by law, a private employer may elect whether to carry workers’ compensation (Labor Code § 406.002); on a governmental building or construction contract, the contractor certifies coverage for each employee on the project. The Texas Residential Construction Commission, which registered builders and remodelers, was abolished.
An insulation contractor working in Texas answers to Labor Code chapter 406 on workers’ compensation, to the registration rules of the cities that issue its permits, and to the energy codes the State Energy Conservation Office names; the Texas Residential Construction Commission, which once registered builders, remodelers and residential construction companies, was abolished. Except as otherwise provided by law, a private employer may elect coverage under § 406.002, but on a governmental building or construction contract § 406.096 has the contractor certify coverage for each employee on the project. San Antonio, for a Home Improvement or Residential Building Contractor registration, and El Paso, for a general contractor’s, ask for a certificate of liability insurance naming the City. Below, each rule is taken as the Texas sources state it, with the line of insurance it touches.
The Texas Residential Construction Commission and the registration that ended with it
The state body that once registered home builders in Texas was the Texas Residential Construction Commission. The Sunset Advisory Commission’s final report on the agency says its original charge included “registering individual builders, remodelers, and residential construction companies”, as well as new home construction and remodel projects. A later House bill analysis puts it the same way from the other side: “The TRCC registered home builders and charged fees for initial and renewal registrations. The legislature subsequently abolished the TRCC.”
The Texas Sunset Advisory Commission’s agency page records the end of it: “The Legislature did not pass House Bill 2295 and the Commission was not continued in separate legislation. The Texas Residential Construction Commission was abolished and the Act expired on September 1, 2009.” The same page says that its records and property went to the Texas Comptroller of Public Accounts, and it now lists the agency as inactive (Texas Sunset Advisory Commission).
None of the sources says the Commission’s registration ever reached a trade contractor doing insulation alone, and no Texas state source read for this page settles whether a license or registration reaches insulation-only work today. The plainest sentence comes from a city: the City of Austin’s contractor-registration page says, about general contractors, “In Texas, anyone can be a General Contractor, including homeowners, and a state license is not required.” That is Austin’s statement about general contractors, not a state finding, and it does not mention insulation.
Labor Code chapter 406: the non-subscriber election and the notices it carries
The statewide part of the Texas workers’ compensation rule is an election. Labor Code § 406.002, headed “COVERAGE GENERALLY ELECTIVE”, reads: “Except for public employers and as otherwise provided by law, an employer may elect to obtain workers’ compensation insurance coverage.” Each qualifier matters. Public employers are outside the election, and the phrase “as otherwise provided by law” leaves room for other rules, such as the public-project certificate in § 406.096. An employer that does elect coverage “is subject to this subtitle.”
The Texas Department of Insurance states the same rule in plain words for private employers: “In Texas, private employers can choose to carry workers’ compensation insurance coverage (subscribers), but it is not required in most cases.” Under § 406.003 an employer may obtain coverage “through a licensed insurance company or through self-insurance as provided by this subtitle”, and TDI notes that “Private employers can be certified to self-insure by applying with the Texas Department of Insurance, Division of Workers’ Compensation (DWC).”
Electing not to carry coverage is not the same as doing nothing. Section 406.004 says an employer that does not obtain coverage “shall notify the division in writing, in the time and as prescribed by commissioner rule, that the employer elects not to obtain coverage.” Section 406.005 adds a duty that runs to the crew: an employer “shall notify each employee as provided by this section whether or not the employer has workers’ compensation insurance coverage”, and a new employee is told at the time of hiring. Under § 406.004, “An employer commits an administrative violation if the employer fails to comply with this section.” TDI sums it up: “Employers that choose not to provide workers’ compensation coverage to their employees must notify their employees and DWC.”
The election also changes what happens in court. Under § 406.033, in a suit by an employee not covered by workers’ compensation insurance obtained as § 406.003 allows, for an injury sustained in the course and scope of the employment, it is not a defense that the employee was guilty of contributory negligence, assumed the risk, or was injured by a fellow employee’s negligence; the employer may still defend on the employee’s intent to cause the injury or intoxication, and the employee must still prove the employer’s negligence (§ 406.033(d)). TDI’s guide puts it directly: “If you don’t provide workers’ compensation coverage, you lose the legal protection against most lawsuits.”
For an insulation contractor working under a general contractor, the statute adds rules of its own. A subcontractor and its employees are not the general contractor’s employees for workers’ compensation purposes if the subcontractor “is operating as an independent contractor” and has a written agreement with the general contractor in which it “assumes the responsibilities of an employer for the performance of work.” And under § 406.123, a general contractor and a subcontractor “may enter into a written agreement under which the general contractor provides workers’ compensation insurance coverage to the subcontractor”.
Labor Code § 406.096 and Rule § 110.110 on a governmental building contract
The public-work rule has a narrower reach. Labor Code § 406.096 requires a governmental entity that enters into a building or construction contract to have the contractor “certify in writing that the contractor provides workers’ compensation insurance coverage for each employee of the contractor employed on the public project.” The subcontractors are covered by the next subsection: “Each subcontractor on the public project shall provide such a certificate relating to coverage of the subcontractor’s employees to the general contractor”, who passes it to the governmental entity.
The statute’s definition of a building or construction contract reaches past new construction: it includes “remodeling, extending, repairing, or demolishing a structure” and “otherwise improving real property or an appurtenance to real property through similar activities.” A governmental entity means the state or a political subdivision of it, and “The term includes a municipality.”
The Division of Workers’ Compensation’s Rule § 110.110, “Reporting Requirements for Building or Construction Projects for Governmental Entities”, carries the requirement past employees. With the exceptions in subsections (h) and (i) of the rule, the persons providing services on the project include everyone performing part of the contractor’s work on it, “regardless of whether that person contracted directly with the contractor and regardless of whether that person has employees”, and the rule names independent contractors, subcontractors, leasing companies, motor carriers and owner-operators among them. The governmental entity must “obtain from the contractor a certificate of coverage for each person providing services on the project, prior to that person beginning work on the project”. The Division’s project-site notice adds that, under Rule 110.110 (d)(7), the contractor must post a notice on each project site telling everyone providing services that they are required to be covered by workers’ compensation insurance. Subsection (h) of the rule excepts certain motor carriers, and subsection (i) excepts sole proprietors, partners and corporate executive officers who are excluded from coverage in accordance with § 406.097.
False or misleading certificates, failing to provide or maintain required coverage, or failing to report a material change “may subject the contractor or other person providing services on the project to administrative penalties, criminal penalties, civil penalties, or other civil actions.” An insulation crew that has elected not to carry coverage on private jobs therefore meets a different rule the day it works on a state or city building contract, and a certificate of coverage for each person has to be in hand before that person begins work on the project.
Government Code § 2253.021: bonds on a Texas public work contract
Public work in Texas brings a bond rule alongside the workers’ compensation certificate. Government Code § 2253.021 requires a governmental entity that makes a public work contract with a prime contractor to require that contractor, “before beginning the work”, to execute a performance bond and a payment bond to the governmental entity once the contract exceeds the values the statute states, and the payment-bond value differs when the entity is a municipality. The statute requires each bond to be “executed by a corporate surety”.
The rule binds the prime contractor. None of the sources read for this page says that a subcontractor must furnish these bonds, and the statute’s words address the prime contractor, not a subcontractor working under one. The statute also protects the contractor’s choice of surety: a governmental entity may not require a contractor on a public building or other construction contract to obtain a surety bond “from any specific insurance or surety company, agent, or broker.”
The State Energy Conservation Office’s codes and Texas home-rule amendments
The energy codes that apply to Texas building work are named by the State Energy Conservation Office, on the Texas Comptroller of Public Accounts’ site. SECO’s code-ordinances page names 2015 IRC, Chapter 11 as the minimum state-mandated code for single-family homes and 2015 IECC as the applicable code for other residences and commercial and industrial buildings. On its commercial page, SECO states that it has elected to continue with 2015 IECC for that construction.
These codes have a statewide reach, and the local layer sits on top of them. SECO puts it this way: “These energy codes are effective statewide. Texas is a “home rule” state, however, allowing local jurisdictions to adopt amendments to the codes.” For non-attainment and affected counties, the same page says the Energy Systems Laboratory at Texas A&M University, at the request of a municipality or county, must first decide whether an amendment is as stringent as the existing state codes, and that “Code changes that are determined to be as stringent or more stringent than state code may be adopted as a local rule.” The page also says “Local jurisdictions are responsible for building energy code implementation and enforcement.” The Health and Safety Code says a municipality “may establish procedures to adopt local amendments”, and that “Local amendments may not result in less stringent energy efficiency requirements in nonattainment areas and in affected counties” than the state’s codes.
For an insulation contractor, the edition is set by the state and the inspection is local, and the local office may work from amendments. The Health and Safety Code also lets SECO adopt and substitute the latest published edition of the residential energy chapter, based on a laboratory’s written findings on its stringency, and SECO describes a process in which it decides whether to adopt each latest edition. The SECO pages read for this page name no edition beyond 2015 IRC, Chapter 11 and 2015 IECC.
Spray foam and fiberglass crews and the Texas rules this research found
The research behind this page looked for a Texas rule written for spray polyurethane foam or for insulation installation, and found and read none. No city page read says whether an insulation-only job needs its own permit. That absence is a fact about the sources read, not a statement that no such rule exists.
A contractor who sprays foam can read more on our spray foam contractor insurance page, and a crew that installs fiberglass on our fiberglass insulation contractor insurance page. At a Home Improvement or Residential Building Contractor registration, San Antonio asks for a certificate of liability insurance, and El Paso’s sheet lists a general liability certificate; the next section covers what Texas law says a certificate can and cannot do.
Insurance Code chapter 1811 and TDI’s certificate FAQ on Texas certificates of insurance
Certificates of insurance carry their own Texas statute. Under § 1811.002, Insurance Code chapter 1811 applies to a certificate of insurance issued on property or casualty operations or a risk located in Texas, “regardless of where the certificate holder, policyholder, insurer, or agent is located.” Subsection (b) of the same section lists what the chapter may not be construed to apply to, including a statement, summary or evidence of property insurance that a lender requires in a lending transaction. The Texas Department of Insurance states the form requirement in its certificate FAQ: “Regardless of where the certificate holder is located, you must use a certificate of insurance approved by TDI for a risk located in Texas.”
The chapter also limits what a certificate is. Under § 1811.152, “A certificate of insurance is not a policy of insurance”, and it does not change the coverage of the policy it references. Under § 1811.153 it confers no new or additional rights beyond what the referenced policy or an executed endorsement provides. Section 1811.154 says a certificate “may not contain a reference to a legal or insurance requirement contained in a contract other than the underlying contract of insurance”, a construction contract included. And under § 1811.156, a certificate issued or required in violation of the chapter “is void and has no effect.”
That matters on a Texas insulation job when the request for a certificate arrives with a subcontract attached. TDI’s FAQ answers the narrow question of identification: a certificate may carry a job number or contract number, “if you are listing the job number or contract number for identification purposes only.” What the general contractor’s contract requires of your general liability or umbrella liability coverage is answered by the policy and its endorsements, not by wording typed onto the certificate.
Contractor registration in San Antonio, Fort Worth, Austin, El Paso, Plano and Houston
Each city below is here because its own office page or document was read and states what it requires of a contractor. None names insulation work, so each note says what the city asks of contractors.
San Antonio
City of San Antonio Development Services states that “All City and State licensed contractors must be registered with Development Services before permits are issued.” Registering as a Home Improvement Contractor or a Residential Building Contractor takes a certificate of liability insurance listing the City of San Antonio as the certificate holder, at minimum limits the City’s page states; the same page says commercial general contractors have no license or registration requirement.
Fort Worth
The City of Fort Worth Development Services Department wants a valid Contractor Registration on file from anyone obtaining a permit under the City’s building, mechanical, plumbing or electrical provisions, with exceptions that include owners of single-family residences working on their own homestead. A building contractor applicant gives the completed application and a copy of a valid driver’s license; the City’s application marks no insurance requirement beside the building registration.
Austin
Before construction under a building permit or trade permit begins, the City of Austin has trade contractors, general contractors and homeowners acting as contractors register with Building and Trade Contractor Services. The City adds that “General Contractors are not required to update their registration annually since a license is not required.” Registration comes before construction starts, not after.
El Paso
The City of El Paso’s contractor registration requirements for general contractors on new commercial work, tenant improvements, new residential work, additions, alterations and roofing list a registration application, a general liability certificate and a blanket building construction bond. The sheet states: “Certificate of Insurance must specify City of El Paso as the Certificate Holder”.
Plano
The City of Plano Building Inspections Department’s contractor handout lists general contractors, a class that includes concrete, demolition, fence, foundation, pool, roof and sign companies, with a current driver’s license and registration renewals. The handout says it “is for informational purposes only and should not be relied on in place of official regulations and/or policies”, so the registration is confirmed against the City’s own rules.
Houston
The Houston Permitting Center’s commercial permitting presentation states that “The City does not license or register general contractors” and that a building permit can be bought by an owner, agent or contractor. A trade permit is different: “A trade permit must be purchased by a licensed contractor.” Which permit a job falls under decides who may pull it.
TDI, DWC, SECO and the Texas offices behind an insulation contractor’s filings
The Texas Department of Insurance says that “TDI’s Division of Workers’ Compensation (DWC) regulates workers’ compensation in Texas.” For a risk located in Texas, the department’s FAQ on certificates calls for a form that TDI has approved. DWC is the office that receives a non-subscriber’s written notice and certifies a private employer to self-insure.
The State Energy Conservation Office, on the Texas Comptroller of Public Accounts’ site, says that “SECO also adopts energy codes for single-family residential, commercial and state-funded buildings.” The Texas Department of Licensing and Regulation describes itself as providing “oversight for a broad range of occupations, businesses, facilities, and equipment.” The Texas Secretary of State’s Corporations Section files and keeps the documents that create or affect business organizations.
Texas also has a workers’ compensation insurer the Legislature created as a last-resort option for employers unable to find coverage elsewhere. Today the Insurance Code sets out that it “operates as a domestic mutual insurance company under Chapter 883” and that it is “not a state agency or executive agency or a governmental entity for any purpose.” Its statutory purposes include to “serve as an insurer of last resort as provided by Subchapter H.”
A Texas quote: your subscriber status, your cities and your public work
Through Wexford Insurance, LLC, an independent insurance agency, Insulation Contractor Insurance places insurance for insulation contractors, including those based in Texas. The quote form asks the state you are based in, what you install, your number of field employees and the coverage you want to talk about. For a Texas business, the useful answers follow from the rules above: whether you subscribe to workers’ compensation or filed as a non-subscriber, which cities register you, and whether any work is on a governmental building contract.
What you install sets which trade page applies: spray foam work or fiberglass work. The coverage you want to talk about may include commercial auto and tools and equipment coverage. The full program for an insulation business is on our insulation business insurance page. Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor.
Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.
- Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.
A chart of what Texas requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: The state body that once registered builders was abolished and its act expired. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The International Residential Code and the International Energy Conservation Code, statewide. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Not required of every employer; this page sets out the reach of each state rule. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.
Nearby states we also insure
Texas coverage, services and state offices
What we insure
Coverage lines
State offices
Texas insulation contractor insurance questions
Does Texas require workers’ comp for contractors?
Not as a general rule. Labor Code § 406.002 says that “Except for public employers and as otherwise provided by law, an employer may elect to obtain workers’ compensation insurance coverage.” An exception that reaches contractors is public work: under § 406.096 a governmental entity that enters a building or construction contract must have the contractor certify in writing that it covers each employee on the public project, and each subcontractor provides its own certificate through the general contractor.
Is workers’ comp required in Texas on a city or state building project?
Yes, for the people working on it. Labor Code § 406.096 has the governmental entity require the contractor to certify coverage for each employee on the public project, and the Division of Workers’ Compensation’s Rule § 110.110 reaches the persons providing services on the project, with the exceptions in its subsections (h) and (i) for certain motor carriers and for the sole proprietors, partners and corporate executive officers excluded from coverage under § 406.097, and it includes subcontractors and independent contractors with or without employees. The entity obtains a certificate of coverage for each person before that person begins work, and the contractor posts the Division’s notice on each project site.
Texas workers’ comp exemption: what does an employer that elects not to carry coverage have to do?
The sources read for this page describe an election, not an exemption certificate. An employer that does not obtain coverage must notify the Division of Workers’ Compensation in writing that it elects not to (Labor Code § 406.004), and every employer must tell each employee whether it has coverage, including a new employee at the time of hiring (§ 406.005). Failing to give a notice that § 406.004 or § 406.005 requires is an administrative violation.
Do contractors need to be licensed in Texas to install insulation?
No Texas state source read for this page settles that for insulation-only work. The state body that registered builders and remodelers is gone: the Texas Sunset Advisory Commission states, “The Legislature did not pass House Bill 2295 and the Commission was not continued in separate legislation. The Texas Residential Construction Commission was abolished and the Act expired on September 1, 2009.” The general-contractor registration rules the sources show are the cities’ own; the city sheets also name state licenses for trades such as electrical and mechanical work, which this page does not cover. San Antonio, Fort Worth, Austin, El Paso and Plano each register contractors, and Houston’s Permitting Center says a trade permit must be bought by a licensed contractor.
Texas energy code adoption: which editions apply to an insulation job?
The State Energy Conservation Office names 2015 IRC, Chapter 11 as the minimum state-mandated code for single-family homes and 2015 IECC as the applicable code for other residences and commercial and industrial buildings. SECO states that “These energy codes are effective statewide. Texas is a “home rule” state, however, allowing local jurisdictions to adopt amendments to the codes.” The local jurisdiction implements and enforces the code on your job.
Texas insulation requirements: is there a state rule for installing spray foam or fiberglass?
The research behind this page found and read no primary Texas rule specific to spray polyurethane foam or to insulation installation. What reaches an insulation job is the general framework: the energy codes the State Energy Conservation Office names, enforced by the local jurisdiction; the contractor registration of a city that requires one; the workers’ compensation rules of Labor Code chapter 406; and, on a certificate of insurance for a Texas risk that Insurance Code chapter 1811 covers, a form approved by the Texas Department of Insurance.
Texas general liability insurance for contractors: which cities ask for a certificate?
Of the cities on this page, San Antonio asks a Home Improvement Contractor or Residential Building Contractor for a certificate of liability insurance listing the City of San Antonio as the certificate holder, and El Paso’s requirements sheet says, “Certificate of Insurance must specify City of El Paso as the Certificate Holder”. Statewide, the Texas Department of Insurance says a certificate for a risk located in Texas must be on a form it has approved; Insurance Code § 1811.002(b) lists certificate types the chapter does not apply to.
This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Texas insulation work
Tell us the state you are based in, what you install, your number of field employees and the coverage you want to talk about, and whether you carry workers’ compensation.