States we serve

New Hampshire Insulation Contractor Insurance

The New Hampshire Insurance Department says general contractors in New Hampshire are not required to hold a state license, though certain specialty trades such as electricians and plumbers are regulated. RSA 281-A:5 requires an employer subject to the workers’ compensation chapter to secure compensation, and RSA 155-A:2, I requires buildings constructed in New Hampshire to comply with the state building code and state fire code.

Get a Quote Call 317-942-0549

A worker taping a duct joint in an attic where metal ducts run across a floor of yellow fiberglass — insulation contractor insurance in New Hampshire

On contractor licensing, the New Hampshire Insurance Department says “In New Hampshire, general contractors are not required to hold a state license, though certain specialty trades such as electricians and plumbers are regulated.” Beside that sentence, RSA 281-A:5 says an employer subject to the workers’ compensation chapter “shall secure compensation to employees in one of the following ways”, and RSA 155-A:2, I says “All buildings, building components, and structures constructed in New Hampshire shall comply with the state building code and state fire code”. The Department’s contractor guide puts it plainly: “Licensing and insurance are separate matters.” What follows is each of those statements in the words of the office or statute behind it, with the coverage lines each one touches, from general liability to workers’ compensation.

The Insurance Department’s general contractor sentence and the OPLC “Find a Board” list

The New Hampshire Insurance Department says general contractors in New Hampshire are not required to hold a state license, though certain specialty trades such as electricians and plumbers are regulated. The same Insurance Department guide adds: “Regardless of licensing status, insurance verification remains essential.”

The state building code statute keeps trade licensing with its own boards: RSA 155-A:2, X says nothing in the chapter “shall affect the statutory authority of the commissioner of labor, the state board for the licensing and regulation of plumbers, or the state electricians’ board to administer their respective programs”. The Office of Professional Licensure and Certification’s “Find a Board” list of the professional licensing boards, commissions and councils it supports names none for insulation work.

New Hampshire’s Consumer Protection Act, RSA 358-A:2, makes it “unlawful for any person to use any unfair method of competition or any unfair or deceptive act or practice in the conduct of any trade or commerce within this state.” Under RSA 358-A:4, the Act “shall be administered and enforced by the consumer protection and antitrust bureau, department of justice established by RSA 21-M:8.”

Chapter 258’s committee to study a residential builder registration system

New Hampshire’s legislature has set up a study rather than a registration: SB 523, signed into law as Chapter 258, is titled “AN ACT establishing a committee to study the implementation of a residential builder registration system.” For the study, Chapter 258 defines “residential builder” as “a person or business entity whose primary source of income is derived from the construction, reconstruction, or substantial renovation of residential properties”. It directs the committee to “Identify which, if any, existing state agency or department would be best suited to oversee and administer a registration system”, and says the committee “shall report its findings and any recommendations for proposed legislation” to the officers and the state library the act names, by the date the act states.

In Chapter 258’s findings, the legislature says “while the overwhelming majority of New Hampshire builders operate with integrity and professionalism, isolated instances of fraud and abuse, often from out of state, have caused harm to consumers and undermined confidence in the industry.”

RSA 281-A:5: a company licensed to write workers’ compensation in New Hampshire, or proof of the ability to pay directly

The New Hampshire Department of Labor’s employer page says: “New Hampshire law requires employers to provide workers’ compensation insurance.” The Department of Labor adds: “The primary responsibility for obtaining workers’ compensation insurance rests upon employers who must apply for and obtain coverage prior to the hiring of any employee.”

RSA 281-A:5 provides: “An employer, or group or association of homogeneous employers, subject to this chapter shall secure compensation to employees in one of the following ways:” Paragraph I reads: “I. By insuring and keeping insured the payment of such compensation with a company licensed to write workers’ compensation insurance in this state and filing with the commissioner, in a form prescribed by the commissioner, evidence of such coverage as the commissioner deems appropriate.” Another route under RSA 281-A:5, III is “furnishing to the commissioner satisfactory proof of financial ability to pay compensation directly to an employee when due in the amounts and manner as provided in this chapter.” RSA 281-A:5-c says a self-insuring private employer “is not an insurance company, reciprocal insurer or other insurer under the laws of this state”.

RSA 281-A:2, VIII(a) counts as a private employer “(a) A person, partnership, association, corporation, or legal representative of a person, partnership, association or corporation who employs one or more persons whether in one or more trades, businesses, professions or occupations and whether in one or more locations.” RSA 281-A:5-f says the workers’ compensation chapter “shall apply to nonresident employees and employers doing business in New Hampshire.” On the residual market, the Department of Labor’s coverage rules say “When coverage is provided by the assigned risk plan NCCI shall provide the department with proof of coverage”. The Department says its Workers’ Compensation Insurance Coverage Verification draws on policy information “reported to the New Hampshire Department of Labor through its designated agent, the National Council on Compensation Insurance (NCCI).” Each of these touches a contractor’s workers’ compensation policy and the paper that proves it.

The RSA 281-A:2 employee presumption, RSA 281-A:18-a officer exclusions and the RSA 281-A:18 contractor rule

Under RSA 281-A:2, VI(b)(1), a person other than those the statute lists as exceptions “who performs services for pay for an employer, is presumed to be an employee”, and “This presumption may be rebutted by proof that an individual meets all of the following criteria”. Among those criteria, the person must have “control and discretion over the means and manner of performance of the work”.

On sole proprietors, RSA 281-A:2, VI(a) says: “If they elect to be personally covered by this chapter, “employee” includes persons who regularly operate businesses or practice their trades, professions, or occupations, whether individually, or in partnership, or association with other persons, whether or not they hire others as employees.” The Insurance Department tells homeowners: “Even if a contractor claims to be a sole proprietor, homeowners should carefully confirm coverage to avoid becoming the default responsible party if an injury occurs on the property.”

RSA 281-A:18-a lets a corporation or limited liability company elect to exclude executive officers or members, up to the number the section states, “from the compulsive coverage requirements under this chapter”, and “No exclusion shall be valid unless properly filed with the commissioner.” A Department of Labor rule says “Only Carriers or NCCI on a carrier’s behalf shall complete and file with the department” the officer-and-member exclusion form, and that “Any filing from another entity shall not be valid.”

Under RSA 281-A:18, “A contractor who subcontracts all or any part of a contract shall bear the liability of the subcontractor of that contract for the payment of compensation under this chapter to the employees of the subcontractor, unless the subcontractor has secured the payment of compensation as provided for in this chapter.” Under RSA 281-A:4-a, a contractor “engaged in the nonresidential building or construction industry shall deliver to the commissioner a workers’ compensation compliance statement” within the time the statute sets after a written request.

Under RSA 281-A:7, I(a)(1), an employer subject to the chapter that fails to secure compensation “may be assessed a civil penalty”. RSA 281-A:7, II lets the commissioner “proceed in the superior court to restrain and prohibit an employer subject to this chapter from conducting business in this state for so long as the employer fails to comply with the provisions of RSA 281-A:5”.

RSA 155-A:1, IV, the State Building Code Review Board and the simplified residential energy form

RSA 155-A:1, IV defines the state building code as the adoption by reference of model codes including the International Energy Conservation Code 2018 and, as the residential building code beside it, the International Residential Code 2024, “as reviewed and recommended by the state building code review board”. Under RSA 155-A:2, I, “The state building code in effect at the time that the application for the building permit required by RSA 155-A:4 is received by the governing authority shall remain in effect for the duration of the work covered by that permit.” RSA 155-A:2, I then sets a concurrency period: “This requirement notwithstanding, for a period of 6 months after the effective date of the code adopted under RSA 155-A:1, IV, a concurrency period is established, allowing building permits, and other required documents, at the election of the applicant, to show compliance using either the code in effect just prior the effective date of the code adopted under RSA 155-A:1, IV, or the code adopted under RSA 155-A:1, IV, but not a combination of the 2 codes.”

RSA 155-A:2, VII says “The contractor of a building, building component, or structure shall be responsible for meeting the minimum requirements of the state building code and state fire code.” RSA 155-A:4, I says “Before starting work as described in RSA 155-A:2, I, the person responsible for such construction shall obtain a permit.” That responsibility for code compliance touches the contractor’s general liability program.

Under RSA 155-A:10-a, the Building Code Review Board provides “a simplified residential energy code compliance form”, and “The correctly completed form shall be accepted by all code enforcement authorities within the state of New Hampshire as one method of verification that the applicable project meets the code requirements.” In municipalities without an enforcement mechanism, “completed compliance forms shall be submitted to the New Hampshire department of energy, on behalf of the building code review board”. Under RSA 155-A:7, I, where there is no local enforcement agency or qualified third party, “the state fire marshal or the state fire marshal’s designee may enforce the provisions of the state building code and the state fire code,” upon the municipality’s written request.

The federal OSHA office covering New Hampshire, RSA 277:2 and isocyanates under the spray gun

OSHA’s own New Hampshire page says “This federal OSHA office covers private sector employers and workers in New Hampshire”, which takes in a private insulation contractor and its crews working in the state. OSHA’s construction respiratory standard, 29 CFR 1926.103, says its requirements “are identical to those set forth at 29 CFR 1910.134”, which requires a written respiratory protection program “In any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer”. State law adds its own duty: RSA 277:2 requires anyone employing others in building work to furnish scaffolding, ladders and other devices “so constructed, placed and operated as to give proper protection to a person so employed or directed.”

For spray foam work, a Consumer Product Safety Commission staff fact sheet says high-pressure systems and low-pressure kits “contain isocyanates in Side A and a mixture of polyols, amine catalysts, flame retardants, blowing agents, and surfactants in Side B.” EPA’s archived spray foam guidance says “The two-component high-pressure kit is a professional system and should only be used by a trained applicator.” NIOSH says isocyanates “can also sensitize workers, making them subject to severe asthma attacks if they are exposed again.” Those exposures touch a spray rig crew’s workers’ compensation and the job’s general liability.

For fiberglass and loose-fill installers, in New Hampshire as everywhere, the Federal Trade Commission’s R-Value Rule at 16 CFR 460.17 says: “If you are an installer, you must give your customers a contract or receipt for the insulation you install.” For attic work around older loose-fill, EPA says “You should assume that vermiculite insulation is from Libby and treat the material as if it contained asbestos by not disturbing it or by using a trained professional if it needs to be removed.”

RSA 228:4-b, RSA 21-I:80 and RSA 281-A:7, V on New Hampshire’s public contracts

RSA 281-A:7, V says any state agency or political subdivision, “before awarding any contract involving labor to a person who is an employer subject to this chapter, shall require that person to supply satisfactory proof that he or she has secured payment of compensation in accordance with the provisions of RSA 281-A:5”. Before work on a state transportation project, RSA 228:4-b requires each contractor, subcontractor and independent contractor to provide “A certificate of insurance of his or her current workers’ compensation coverage in New Hampshire for the classification of work to be completed on the project”, subject to the exclusions the statute lists. For major state building projects, RSA 21-I:80, VI(a) likewise requires each contractor, subcontractor and independent contractor to provide documents to the commissioner of administrative services “Prior to any work being done”.

RSA 277:5-a requires anyone signing a contract for public work or building at or above the total project cost the section states to have an OSHA construction safety program, of the length it sets, for their on-site employees, and adds, subject to the exemptions the section lists: “All employees are required to complete the program prior to beginning work.”

Manchester’s online permits, Nashua’s housing programs, Keene’s certificate of insulation and the other municipal pages

Each card below says only what that city or town’s own office states. Where an office ties a document to a kind of permit or program, the card names that limit.

Manchester

Manchester’s Planning and Community Development Department says “Building Permits are available online.” Its electrical permit section adds: “No work should be commenced prior to receipt of an approved permit.” The permit page says “all multi-family dwellings, non owner-occupied single family dwellings and commercial projects require a licensed NH plumber”.

Nashua

Nashua’s Department of Building Safety states its mission as “the fair and equal administration of the building codes adopted by the State of NH and the City of Nashua.” For the city’s Housing Improvement and Lead Paint Programs, the contractor application says “Insurance requirements will be listed in the scope of work for each project” and asks for the applicant’s “Liability Amt”, “Property Amt” and “Workers’ Comp”.

Dover

Dover’s Inspection Services lists the required building inspections “in the order they should take place”, and the list includes “Insulation” after the rough-in inspection. Inspections may be requested through “the City of Dover’s online permitting portal”, and advance notice “is suggested.”

Rochester

Rochester’s Police Department, in consumer advice to residents hiring a home contractor, says: “Ask each contractor for proof of insurance.” It also advises: “Always have a written contract before any work is done or any payment made.”

Keene

Keene’s Community Development says “Building staff is responsible for the review, approval, issuance and inspection of all construction within the City of Keene”, including “energy efficiency”. For multifamily and commercial buildings, its final-inspection list says “Attic insulation must be completed and certificate of insulation displayed.” Under energy conservation: “Submit ComCheck forms and inspection sheets.”

Salem

Salem’s Engineering Division says “The Town of Salem requires that contractors obtain a permit for work done within rights-of-way, whether public or private, throughout town”, and tells applicants to “Obtain current Bonds and Insurances (e.g. General Liability and Workers Compensation), per application.” For electrical, plumbing, gas and mechanical permits, Inspectional Services says “A copy of your license and photo identification will be required.”

The offices behind these cards are Manchester’s Planning and Community Development Department, Nashua’s housing-program contractor application, Dover’s Inspection Services, Rochester’s Police Department, Keene’s Community Development and Salem’s Engineering Division.

The Insurance Department’s homeowner warnings and the coverage lines they touch

The Insurance Department’s contractor guide warns that “if a contractor does not carry workers’ compensation insurance and a worker is injured on your property, the homeowner could be held responsible for medical expenses, lost wages, and related legal costs.” It says “many standard New Hampshire homeowners’ policies exclude or limit coverage for damage caused by contractors.” It tells homeowners to be cautious “if a contractor refuses to provide proof of insurance, asks the homeowner to obtain permits in their own name, or suggests that insurance is unnecessary.”

The rules above touch an insurance program here: the Insurance Department’s statement that contractors with employees “are required under New Hampshire law to carry workers’ compensation insurance”, met under RSA 281-A:5, which touches workers’ compensation; and the homeowner warnings on property damage, with Salem’s rights-of-way permits, which touch general liability. For a New Hampshire crew, workers’ compensation and general liability sit side by side on the insulation business insurance page, while the spray foam insurance and fiberglass insulation contractor insurance pages follow the work itself.

Through Wexford Insurance, LLC, an independent insurance agency, Insulation Contractor Insurance places coverage for insulation contractors. Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor. The quote form asks the state you are based in, what you install, your number of field employees and the coverage you want to talk about.

New Hampshire: what the state sets for insulation work, what each rule leaves open, and the coverage page that discusses it.
Contractor license No state license for general contractors; the state licenses certain specialty trades
Injury and damage to others from the work, during the job and after it General Liability
Energy code The International Energy Conservation Code, statewide, for residential and commercial buildings
Damage the finished work causes after you leave General Liability
Workers’ compensation Required for covered employers, bought in the open market
A crew member hurt on the job Workers’ Compensation

Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.

  • Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.

A chart of what New Hampshire requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: No state license for general contractors; the state licenses certain specialty trades. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The International Energy Conservation Code, statewide, for residential and commercial buildings. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.

Nearby states we also insure

New Hampshire insulation contractor insurance questions

New Hampshire contractor license requirements: what does the state say about general contractors and specialty trades?

The New Hampshire Insurance Department says general contractors in New Hampshire are not required to hold a state license, though certain specialty trades such as electricians and plumbers are regulated. The Office of Professional Licensure and Certification’s “Find a Board” list of the professional licensing boards, commissions and councils it supports names none for insulation work. Chapter 258 sets up “a committee to study the implementation of a statewide registration system for residential builders and contractors.” The Department’s guide adds: “Licensing and insurance are separate matters.”

Is workers comp required in New Hampshire for an insulation contractor with employees?

The New Hampshire Department of Labor says: “New Hampshire law requires employers to provide workers’ compensation insurance.” It adds that employers “must apply for and obtain coverage prior to the hiring of any employee.” The Insurance Department’s contractor guide says contractors with employees “are required under New Hampshire law to carry workers’ compensation insurance.” For sole proprietors, RSA 281-A:2, VI(a) makes them employees only “If they elect to be personally covered by this chapter”.

New Hampshire workers compensation requirements: how does RSA 281-A:5 let an employer secure compensation?

RSA 281-A:5 says an employer subject to the chapter “shall secure compensation to employees in one of the following ways”. Paragraph I is insuring with “a company licensed to write workers’ compensation insurance in this state” and filing evidence of that coverage with the commissioner. Paragraph III is “furnishing to the commissioner satisfactory proof of financial ability to pay compensation directly”. Under RSA 281-A:18, a contractor who subcontracts “shall bear the liability of the subcontractor” for compensation to the subcontractor’s employees, “unless the subcontractor has secured the payment of compensation as provided for in this chapter.”

New Hampshire energy code: what does RSA 155-A:1, IV adopt, and which code applies to a job?

RSA 155-A:1, IV defines the state building code as the adoption by reference of model codes including the International Energy Conservation Code 2018 and the International Residential Code 2024. Under RSA 155-A:2, I, the code in effect when the building permit application “is received by the governing authority shall remain in effect for the duration of the work covered by that permit.” It then sets a concurrency period in which an applicant may elect to show compliance under the code in effect just before the new one, but not a combination of the codes.

New Hampshire residential energy code: what is the simplified compliance form, and who takes it?

Under RSA 155-A:10-a, the Building Code Review Board provides “a simplified residential energy code compliance form”, and “The correctly completed form shall be accepted by all code enforcement authorities within the state of New Hampshire as one method of verification that the applicable project meets the code requirements.” In municipalities without an enforcement mechanism, “completed compliance forms shall be submitted to the New Hampshire department of energy”.

New Hampshire insulation requirements on the job: what do the statute and the FTC ask of an installer?

RSA 155-A:2, VII says “The contractor of a building, building component, or structure shall be responsible for meeting the minimum requirements of the state building code and state fire code.” Under the Federal Trade Commission’s R-Value Rule at 16 CFR 460.17, “If you are an installer, you must give your customers a contract or receipt for the insulation you install.”

New Hampshire spray foam insulation: what do federal agencies say about isocyanates and safe work practices?

A Consumer Product Safety Commission staff fact sheet on spray foam says high-pressure systems and low-pressure kits “contain isocyanates in Side A and a mixture of polyols, amine catalysts, flame retardants, blowing agents, and surfactants in Side B.” It says “Contractors should use safe work practices to reduce or prevent exposures to homeowners at every stage of SPF installation.” For the crew itself, OSHA’s New Hampshire page names a federal office that “covers private sector employers and workers in New Hampshire”.

General liability insurance New Hampshire: where does it come up for an insulation contractor?

In the New Hampshire Insurance Department’s words, “Contractor insurance helps ensure that losses related to the contractor’s work are handled by the contractor’s insurance company, rather than shifting responsibility to the homeowner or the homeowner’s own insurance policy.” The Department says “If a contractor is uninsured or inadequately insured, a homeowner may face liability for injuries, property damage, construction defects, or unfinished work.” For permits for work within rights-of-way, Salem’s Engineering Division tells applicants to “Obtain current Bonds and Insurances (e.g. General Liability and Workers Compensation), per application.”

This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.

Get a quote for your New Hampshire insulation work

Tell us the state you are based in, what you install in New Hampshire, your number of field employees and the coverage you want to talk about.

Get a Quote Call 317-942-0549