States we serve
Wisconsin Insulation Contractor Insurance
In the Department of Safety and Professional Services’ words, its Dwelling Contractor credential is for a business seeking “to obtain building permits for one- and two-family dwellings”, and Wis. Stat. 101.654(2)(a) backs it with a surety bond or a general liability policy. Unless exempted, Wis. Stat. 102.28(2)(a) has a covered employer insure its workers’ compensation “in an insurer authorized to do business in this state.”
Where a Wisconsin insulation contractor obtains a dwelling building permit, a state credential rule applies, and a payroll rule applies to every covered employer. Apart from the Wis. Stat. 101.654(1) exceptions SPS 305.31(1) names, among them the exemption for “an owner of a dwelling who resides or will reside in the dwelling and who applies for a building permit to perform work on that dwelling”, whoever obtains a building permit for the dwellings the Department of Safety and Professional Services names, “one- and two-family dwellings”, must hold the department’s “dwelling contractor certification” or its “dwelling contractor — restricted certification”, and hold, or employ, a certified dwelling contractor qualifier; and Wis. Stat. 102.28(2)(a) requires every employer Wis. Stat. 102.04(1) describes, unless exempted, to insure its workers’ compensation “in an insurer authorized to do business in this state.” The certification rests on a surety bond or a general liability policy, and the payroll rule ends at a workers’ compensation policy.
Wis. Stat. 101.654, SPS 305.31 and the dwelling contractor qualifier
Wisconsin’s credential attaches to the person who obtains the building permit. The department’s rule SPS 305.31(1), made under Wis. Stat. 101.654, says “no person may obtain a building permit for a one- or 2-family dwelling unless the person complies with all of the following, except as provided under s. 101.654 (1) (b) and (c) 2., Stats.”, which are holding a “dwelling contractor certification” or a “dwelling contractor — restricted certification” and holding, or engaging as an employee, a person who holds the department’s dwelling contractor qualifier certification.
The certification belongs to a firm and the qualifier to a person. The Dwelling Contractor page says “This is a credential held by an organization or business.”, and the Dwelling Contractor Qualifier page says “This is a credential held by an individual.” Under Wis. Stat. 101.654(1)(b), the certificate requirement “does not apply to an owner of a dwelling who resides or will reside in the dwelling and who applies for a building permit to perform work on that dwelling.”
Once a permit is needed, SPS 305.31(4)(b) says that, for a project that requires a uniform building permit under SPS 320.08, a certified dwelling contractor “may not commence construction until a permit is issued for the construction.” Under Wis. Stat. 101.654(5), the department may revoke or suspend a certificate of financial responsibility if, among other grounds, “The holder engages in the construction of a dwelling without a permit required under this chapter.”
The Wis. Stat. 101.654(2) bond or liability policy behind the certificate of financial responsibility
The dwelling contractor certification is issued as a certificate of financial responsibility. Wis. Stat. 101.654(2)(a) requires an applicant for the certificate to prove it has in force either a surety bond “conditioned upon the applicant complying with all applicable provisions of the” dwelling code and local ordinances, or a policy of general liability insurance, each at or above the amount the statute sets. That policy insures the applicant “because of bodily injury to or death of others or because of damage to the property of others” and must be issued by “An insurer authorized to do business in this state.” or by “An insurer that is eligible to provide insurance as a surplus lines insurer in one or more states.”
Wis. Stat. 101.654(2)(b) also requires an applicant that must insure under Wis. Stat. 102.28(2)(a), or is self-insured, to show “that the applicant has in force a policy of worker’s compensation insurance issued by an insurer authorized to do business in this state” or self-insurance under the chapter. Wis. Stat. 101.654(4)(a) says “The department shall suspend without prior notice or hearing the certificate of financial responsibility of a person who does not file satisfactory proof of a replacement bond or replacement insurance as required by this subsection.”
Homeowners see the same rule from their side. Wis. Stat. 101.65(1r) requires cities, villages, towns and counties to have an owner who applies for a building permit sign a statement that, if the owner hires a contractor who is not bonded or insured as Wis. Stat. 101.654(2)(a) requires, the owner “may be held liable for any bodily injury to or death of others or for any damage to the property of others that arises out of the work performed under the building permit”.
Wis. Stat. 102.28(2)(a), the 102.04(1)(b) employer test and the Department of Workforce Development’s deadlines
Wis. Stat. 102.28(2)(a) says “Unless exempted under par. (b) or (bm) or sub. (3), every employer, as described in s. 102.04 (1), shall insure payment for compensation under this chapter in an insurer authorized to do business in this state.” Among the employers the chapter covers, Wis. Stat. 102.04(1)(b) names “Every person who at any time employs 3 or more employees for services performed in this state, whether in one or more trades, businesses, professions, or occupations, and whether in one or more locations.” “Every person who employs fewer than 3 employees, provided the person has paid wages of $500 or more in any calendar quarter for services performed in this state.”
The Department of Workforce Development’s employer page says “You must get insurance on the day you employ the third person.” under its employee-count test, and its wage test sets a deadline in the next calendar quarter. It adds that “Out-of-state employers must have worker’s compensation insurance if they have employees working in Wisconsin.” On buying the coverage, the department says “The State of Wisconsin does not write or provide worker’s compensation insurance coverage.” Where coverage is unavailable in the private market, it says the agent “should submit an application” to the state’s residual market for employers the private market turns down. A Wisconsin workers’ compensation policy therefore comes from an authorized insurer, not from the State.
Under Wis. Stat. 102.28(4)(a), “When the department discovers an uninsured employer, the department may order the employer to cease operations” until it complies with the insurance duty.
The Department of Workforce Development’s owner page, closely held corporations and the 102.07(8)(b) conditions
The department’s owner page says “Sole proprietors that have no employees are not required to carry worker’s compensation insurance in Wisconsin.”, and it says the same of partnerships with partners only and LLCs with members only and no employees. It also says “All worker’s compensation policies exclude the sole proprietor, partners and members of limited liability companies unless specifically endorsed to include them.”
The department’s corporate officer page says “Corporate officers are considered employees of the corporation and the corporation is subject to the Wisconsin Worker’s Compensation Act.”, and that for a closely held corporation with no other employees and no more corporate officers than the page allows, “a worker’s compensation policy is not required if both officers elect not to be subject to the Worker’s Compensation Act.”
For crews hired by the job, Wis. Stat. 102.07(8)(b) says an independent contractor is not an employee only “if the independent contractor meets all of the following conditions”, among them that it “Maintains a separate business with his or her own office, equipment, materials and other facilities.”
Chapter SPS 322 for dwellings, SPS 361.05(2) for commercial buildings and the SPS 320.05(1) limit
For dwellings, the energy rules are a chapter of the Uniform Dwelling Code. Chapter SPS 322 ENERGY CONSERVATION says “This chapter applies to all one- and 2-family dwellings covered by this code that use any amount of non-renewable energy for heat generation.” SPS 322.01(3)(a) says its vapor retarder and moisture control rules “apply to any dwelling with insulation installed, whether or not the insulation is required under this code.”
The dwelling code’s reach matters to retrofit work. SPS 320.05(1) says “The provisions of this code shall not apply to dwellings and dwelling units, the construction of which was commenced prior to the effective date of this code, or to additions or alterations to such dwellings.” Its note says “The provisions of chs. SPS 320 to 325 may be adopted by a municipality to apply to any additions or alterations to existing dwellings.” So in a home whose construction began before the code took effect, an insulation alteration falls under these chapters only where a municipality has adopted them for alterations.
Commercial buildings follow a different text. SPS 361.05(2) says “The International Energy Conservation Code® – 2021, subject to the modifications specified in chs. SPS 361 to 366 is incorporated by reference into chs. SPS 361 to 366.” A fiberglass insulation crew on a commercial job works to that modified code; on a dwelling the Uniform Dwelling Code reaches, to the SPS 322 installation rules below.
Blown-insulation R-values, attic baffles and the SPS 321.11 foam thermal barrier
For batt and blown fiberglass work on a dwelling, SPS 322.20(2)(b) says “The manufacturer’s settled R-value shall be used for blown insulation.” SPS 322.21(1) says “Insulating blankets or batts shall be held in place with a covering or other means of mechanical or adhesive fastening.” SPS 322.32(1)(b) requires a wood framed or equivalent baffle or retainer “when loose fill insulation is installed”, to keep the fill from “spilling into the living space when the attic access is opened”. Except as par. (c) provides, SPS 322.38(2)(a) says “all frame walls, frame floors and frame ceilings that comprise the thermal envelope, shall have a vapor retarder installed on the warm-in-winter side of the thermal insulation.”
Spray foam crews meet that vapor rule from the other side: among its exceptions, SPS 322.38(2)(c) waives the vapor retarder over cavities where the rule’s share of the required R-value comes from spray-applied foam of the perm rating it sets, “unless required by the foam manufacturer.” Except as its paragraph (c) provides, SPS 321.11(1)(b) says “foam plastic insulation shall be separated from the interior of the dwelling by one of the following thermal barriers”.
Re-occupying the SPF work zone, Libby vermiculite and the OSH Act’s private-sector reach
On OSHA’s State Plans page, the map list shows “WI” with neither the mark OSHA uses for plans “that cover both private and state and local government workplaces” nor the mark for plans “that cover state and local government workers only”, and OSHA’s About page says “The OSH Act covers most private sector employers and their workers”.
Before a spray foam job in a Wisconsin home, note how the EPA’s spray polyurethane foam contractor-client checklist describes itself: “a voluntary aid to protect against potential risks from SPF; it is not a regulatory compliance tool”, and adds that “some of the best practices included in the checklist may be required under local, state or federal worker protection or other regulations.” It says “Residents, building occupants, and other construction or trade workers not wearing PPE should not re-occupy the restricted work zone until the SPF product has finished curing and the site has been ventilated and cleaned of dust and debris.” For a retrofit crew opening an old attic, the EPA’s vermiculite page says “You should assume that vermiculite insulation is from Libby and treat the material as if it contained asbestos by not disturbing it or by using a trained professional if it needs to be removed.”
Green Bay, Madison, Racine, Appleton, Eau Claire and Oshkosh on the state dwelling contractor credentials
Green Bay, Madison, Racine, Appleton, Eau Claire and Oshkosh each post their own permit terms, and each card quotes its city alone.
Green Bay
Green Bay’s residential permits page says “To obtain a building permit in the City of Green Bay, a contractor must carry the State of Wisconsin Dwelling Contractor Certification and a Dwelling Contractor Qualifier Certification from the Department of Safety and Professional Services.”
Madison
Madison’s Development Services Center says “You need a permit for alterations to one and two family homes.” City of Madison Engineering’s prequalification page says contractors only working on private property under a building permit “should submit a copy of their state contractor’s license (from the Department of Professional Services) to the Building Inspection Division.”
Racine
Racine’s permit application says “Contractors are also required to only subcontract with contractors that hold the appropriate contractor credentials.” The form carries the owner cautionary statement under “Section 101.65 (lr) of the Wisconsin Statutes”, which warns of consequences if the hired contractor “is not bonded or insured as required” under Wis. Stat. 101.654(2)(a).
Appleton
Appleton Building Inspections says “Residential contractors are required to be registered with the State - ask for their registration number.” Asked whether a permit is needed, it answers “It depends.” and lists remodeling and siding among the projects that “most likely will require a permit.”
Eau Claire
Eau Claire says “Contractors must be state-certified to take out a permit.” Its Inspections Division’s general contractor brochure lists “Insulation” among the building inspections on its checklists, and says finals are “to be requested by the General Contractor” and only “when all trades are completed.”
Oshkosh
Oshkosh Inspection Services says the company credential is obtained “by submitting an application form, required fees, and a certificate of insurance stating that your company has a minimum liability insurance set by the State of WI”, and that the qualifier credential “is held by an individual within the company”. Wis. Stat. 101.654(2)(a) also allows a surety bond in place of the liability policy.
The cards quote the City of Green Bay’s residential permits page, the City of Madison Development Services Center, the City of Madison Engineering prequalification page, the City of Racine permit application, Appleton Building Inspections, the City of Eau Claire permit page and Oshkosh Inspection Services.
The certificate of financial responsibility and the policies that stand behind it
Where a contractor obtains a Wisconsin dwelling building permit and no exemption applies, the paper runs from the certificate of financial responsibility to what stands behind it: the bond or the general liability policy Wis. Stat. 101.654(2)(a) requires, and the workers’ compensation policy Wis. Stat. 102.28(2)(a) requires of a covered employer that is not exempted. The insulation contractor insurance overview sets out the program as a whole, beside the pages for spray foam insurance and fiberglass insulation contractor insurance.
Through Wexford Insurance, LLC, an independent insurance agency, Insulation Contractor Insurance places coverage for insulation contractors. Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor. Your number of field employees, what you install, the state you are based in and the coverage you want to talk about are what the quote form asks.
Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.
- Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.
A chart of what Wisconsin requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A state contractor credential is required; it applies to whoever obtains the building permit for a dwelling the state’s Uniform Dwelling Code covers. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The Uniform Dwelling Code’s energy conservation chapter and the International Energy Conservation Code, statewide. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market; the law sets a threshold for which employers it covers. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.
Wisconsin coverage, services and state offices
What we insure
Coverage lines
Wisconsin insulation contractor insurance questions
Wisconsin contractor license requirements: what must an insulation contractor hold to obtain a dwelling building permit?
SPS 305.31(1) says “no person may obtain a building permit for a one- or 2-family dwelling unless the person complies with all of the following, except as provided under s. 101.654 (1) (b) and (c) 2., Stats.”, namely a dwelling contractor certification or the restricted one, and a certified qualifier, held or employed. SPS 305.31(1) ties those credentials to whoever obtains the permit and names no trade. Wis. Stat. 101.654(1)(b) exempts “an owner of a dwelling who resides or will reside in the dwelling and who applies for a building permit to perform work on that dwelling.”
Wisconsin contractor registration: what do Appleton and Oshkosh tell a contractor about the state credential?
The City of Appleton’s Building Inspections page says “Residential contractors are required to be registered with the State - ask for their registration number.” The City of Oshkosh says “If you do not occupy the dwelling or you’re a contractor and need to apply for and obtain a building permit for a one- or two-family dwelling building or remodeling job in Wisconsin you need two business credentials from the Wisconsin Department of Safety and Professional Services”. Oshkosh describes a certificate of insurance as part of the company credential’s application; Wis. Stat. 101.654(2)(a) also allows a surety bond.
Is workers comp required in Wisconsin once an insulation contractor hires installers?
Unless exempted, Wis. Stat. 102.28(2)(a) has every employer Wis. Stat. 102.04(1) describes insure its workers’ compensation “in an insurer authorized to do business in this state.” Among the employers it covers, Wis. Stat. 102.04(1)(b) names “Every person who at any time employs 3 or more employees for services performed in this state, whether in one or more trades, businesses, professions, or occupations, and whether in one or more locations.” “Every person who employs fewer than 3 employees, provided the person has paid wages of $500 or more in any calendar quarter for services performed in this state.”
Wisconsin workers comp exemption: does an insulation business owner with no employees need a policy?
The Department of Workforce Development says “Sole proprietors that have no employees are not required to carry worker’s compensation insurance in Wisconsin.”, and the same of partnerships with partners only and LLCs with members only and no employees. The department’s sole proprietor page says “All worker’s compensation policies exclude the sole proprietor, partners and members of limited liability companies unless specifically endorsed to include them.” For corporations, the department says “Corporate officers are considered employees”, and that a closely held corporation meeting its conditions needs no policy “if both officers elect not to be subject to the Worker’s Compensation Act.”
Wisconsin energy code: which code governs insulation in a house, and where does it stop?
For dwellings, the Uniform Dwelling Code’s energy chapter says “This chapter applies to all one- and 2-family dwellings covered by this code that use any amount of non-renewable energy for heat generation.” SPS 320.05(1) says “The provisions of this code shall not apply to dwellings and dwelling units, the construction of which was commenced prior to the effective date of this code, or to additions or alterations to such dwellings.” Its note says “The provisions of chs. SPS 320 to 325 may be adopted by a municipality to apply to any additions or alterations to existing dwellings.”
Wisconsin building code insulation rules: what does the dwelling code ask of a batt or blown-in installer?
Under the Uniform Dwelling Code, SPS 322.20(2)(b) says “The manufacturer’s settled R-value shall be used for blown insulation.” SPS 322.21(1) says “Insulating blankets or batts shall be held in place with a covering or other means of mechanical or adhesive fastening.” For attics, SPS 322.32(1)(b) requires a wood framed or equivalent baffle or retainer “when loose fill insulation is installed”, to keep the fill from “spilling into the living space when the attic access is opened”.
Spray foam insulation Wisconsin: which dwelling code rules apply to foam plastic?
Except as its paragraph (c) provides, SPS 321.11(1)(b) says “foam plastic insulation shall be separated from the interior of the dwelling by one of the following thermal barriers”. SPS 321.11(1)(c) exempts foam plastic “In the box sill of the basement or ground floor, above the bottom of the floor joists.” and foam “On overhead garage doors.” Outside the walls, SPS 322.21(3)(a) says “Exterior foam plastic insulation shall be protected from physical damage and damage from ultraviolet light with a permanent, opaque, weather-resistant covering or coating.”
General liability insurance Wisconsin: when does the state ask a contractor to carry it?
The Department of Safety and Professional Services issues its Dwelling Contractor credential to businesses seeking “to obtain building permits for one- and two-family dwellings”. Wis. Stat. 101.654(2)(a) requires an applicant to prove it has in force a surety bond or a policy of general liability insurance, each at or above the amount the statute sets. The policy insures the applicant “because of bodily injury to or death of others or because of damage to the property of others” and must come from “An insurer authorized to do business in this state.” or from a surplus lines insurer the statute describes.
This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Wisconsin insulation work
Wisconsin crews can start a quote with their home state, the insulation they put in, the number of installers they keep in the field and the coverage they want to discuss.