Owner Resources

How to Become a Weatherization Contractor

A worker in safety glasses and gloves kneeling beside metal ductwork in an attic with fiberglass insulation

You become a weatherization contractor by winning work from a local agency, and some agencies keep a contractor list. The U.S. Department of Energy funds its Weatherization Assistance Program through the states, and the local organizations the states contract with, DOE says, “use in-house crews and private contractors to perform the weatherization services for low-income families.”

Where a private crew fits in the federal program

The money moves from the Department of Energy to the states, and from the states to local organizations. DOE says that once it awards the grants, “the states, tribes, and territories contract with” local organizations it describes as “community action agencies, other nonprofits, and local governments.”

The work begins from an audit. DOE says the program takes a “whole house weatherization” approach that analyzes the building systems “through the completion of an energy audit”. Its list of building shell measures includes “Install wall, floor, ceiling, attic, and/or foundation insulation.”, “Complete Blower Door Testing.” and “Perform air sealing.” Health and safety come ahead of the measures. DOE says providers check the building envelope and major energy systems for occupant health or safety concerns before installing any measure, and on a leaking roof, “either the roof is repaired before the insulation is installed or the home is deferred until repairs can be made.”

Winning work from a local agency

The way in is the local agency, and the state’s weatherization office is the place to ask. DOE’s application page says the program “is administered at the state and local level.” It says a state, tribal or territorial website “may provide a list of the local organizations or providers that offer weatherization services”, and that “This list is usually organized by county”. The page is written for households, but a contractor can use such a list to see whom to call.

Iowa shows how a state office frames the contractor side. The Iowa Department of Health and Human Services posts contract templates for its local agencies and says “Agencies may use these templates, revising them as needed.” Its Competitive Bid weatherization template says “Any Contractor interested in working on homes for the Iowa Weatherization Program may file an application for the Approved Contractors list.” Selection then follows the agency’s procurement. In New Jersey, the Department of Community Affairs’ weatherization form “Justification for Selection of Contractor” has the local agency check whether the contractor “has submitted the lowest responsible proposal (bid)”, “meets the minimum liability and property insurance” requirements, with copies of certificates of insurance attached, and “meets the Bonding requirements”, among other criteria. North Carolina’s Weatherization Assistance Program subcontractor agreement for insulation installation, a form marked “Last Updated 4/2015”, recites that the local agency used “its agency procurement procedures” and found the subcontractor to be “the lowest responsible bidder”.

The Standard Work Specifications and your state’s field guide

The work is judged against the Standard Work Specifications, as the state’s field guide carries them. DOE’s Quality Work Plan notice says the plan “defines what constitutes a quality installation of weatherization measures, outlines how those measures are inspected and validated, and prescribes acceptable training and credentialing of workers.” Its intended audience is “WAP Grantee Program Managers, WAP Subgrantee Managers”, and it says “Grantees must provide Subgrantees and/or contractors with all technical requirements (e.g., field guide(s), building diagnostic and combustion safety procedures) for field work.”

The notice says “The Standard Work Specifications (SWS) define the minimum acceptable outcomes for home energy upgrades installed on single-family, multifamily, and manufactured housing.” The field guide is the state’s version. Under the notice, “Field guides provide Grantee-specific comprehensive field standards outlining expectations of work quality and the installation of WAP measures.”, and their installation standards, when a state submits its guide, “must meet or exceed the minimum standards outlined in the current SWS”, for the tasks the SWS lists. On the job, “Crew and Contractor work orders need to demonstrate the performance requirements (e.g., R-value, U-values, equipment efficiency values, etc.) from the energy audit.”

State documents name their own standards. Iowa’s template says contractors “must be able to demonstrate, that they are qualified to perform the necessary work described in the Iowa Weatherization Bureau’s Weatherization Work Standards (which reflects SWS requirements)”. North Carolina’s form says “All services must be in accordance with the North Carolina Weatherization Installation Standard Work Specifications.”

The final inspection and the cost of a failed home

In DOE’s program, every unit reported as complete receives a final inspection, and a certified inspector leads it, subject to the exemption below. The notice says “Every DOE WAP unit reported as complete must receive a Final Inspection documenting that all work meets the minimum specifications outlined in the Grantee’s DOE-approved field guide.” and “Final inspections must be led by a QCI.”, a Quality Control Inspector. It also says “Programs which do not install envelope measures are exempt from the QCI certification requirement.”

A failed inspection carries terms in the contract. Iowa’s template says that if a home is failed by the agency or “the State Quality Certified Inspector (QCI)”, the contractor “will be required to complete or correct the home immediately or within a timeframe approved by the Agency”, and “If a reinspection is necessary, the cost of the second inspection of work will be the Contractor’s responsibility and will be deducted from the payment to the Contractor.”

Real-World Scenario: A small cellulose outfit gets onto a county agency’s list and takes an attic and sidewall job written from an energy audit. The work order shows the R-value the audit calls for. At final inspection, the agency’s certified inspector finds a stretch of attic without depth markers and fails the home. The crew returns, finishes the attic and photographs it, and the owner builds time for return trips into each agency bid she writes afterward.

Training, certification and the people on your crew

Training expectations come from the grantee, under the notice. It says “Grantee T&TA plans must ensure WAP field workers receive comprehensive training on a regular basis, as defined by the Grantee, for the position in which the worker is employed.” It adds that comprehensive training must come from, or work with, a training program “accredited by a DOE-accepted credentialing body”.

Certification attaches to people. DOE’s accredited-training page puts it this way: “an individual gets certified and organizations, such as training providers, get accredited.” For installers, DOE calls its Installer Badges Toolkit a “voluntary approach to training and skills recognition”. Our installer certification guide covers programs outside the federal program.

Contracts add training of their own. Iowa’s template says “Training will be provided by the Agency.”, puts the contractor on probation for a number of complete jobs the agency sets, and says “The Contractor must agree to attend any additional training deemed required or necessary according to the Iowa Bureau of Weatherization or the Agency.” North Carolina’s form says crew members “must attend all Weatherization Training provided by the Division for subcontractors”. In its call for HVAC contractors, dated “9/28/2016”, the Community Action Partnership of North Central Missouri asked for “Proof of required OSHA training (OSHA-30 for crew leaders/ foremen; OSHA-10 for all others).”

Lead, asbestos and the credentials an agency keeps on file

Lead and asbestos work has its own lines in these contracts. Iowa’s template says “The contractor is required to have a Certified Lead Renovator (certified renovator) on staff within 60 days of contracting with the agency (usually the on-site supervisor).” and “A copy of the Lead Firm Certificate must be provided for the agency file.” The Missouri call asked for “Proof of EPA Certified Firm Certification and Certified Renovator and Lead Safe Work (LSW) training documentation, if any LSW is to be performed”, a line it marked for weatherization contractors only. North Carolina’s form asks the subcontractor to ensure personnel can “appropriately handle suspected asbestos containing materials”, through an OSHA course the form names.

Your business credentials go in the same folder. Iowa’s template asks the contractor “to furnish a copy of an Iowa Contractors Registration card to the Agency.” The King County Housing Authority in Washington asks for a “Copy of your current Washington contractor’s license.” and a federal tax form.

Insurance terms, agency by agency

The documents we read list different insurance lines, so read the terms of the agency you apply to. Iowa’s template says “The Contractor agrees to furnish a Certificate of Insurance to the Agency with the following liability insurance coverage minimums:”, and lists commercial general liability, workers’ compensation (or a signed waiver where the contractor is exempt) and automobile coverage, the last at a “(Coverage amount as deemed sufficient by Agency)”. On pollution coverage, it says “Although POI coverage is no longer required, it is recommended by the U.S. Department of Energy (DOE).”

North Carolina’s dated form says the subcontractor “shall provide commercial insurance of such type and with such terms and limits as may be reasonably associated with the contract.” It says “The Subcontractor must list the Contractor as a certificate holder on all relevant policies.”, where the “Contractor” is the local subgrantee, and it lists workers’ compensation with employer’s liability, commercial general liability, and automobile liability covering “all owned, hired and non-owned vehicles used in performance of the contract.”

The Community Action Partnership of North Central Missouri, in that call for HVAC contractors for its Weatherization Department, listed “Proof of Insurance” covering comprehensive general liability, vehicle insurance and “Workman’s Compensation Insurance Coverage.”

The King County Housing Authority says a contractor who asks to join its list of weatherization and repair contractors will be asked for certificates of insurance for general liability, automobile liability, Washington stop gap, “contractor’s pollution legal liability” and fidelity insurance. It says the pollution coverage “must apply to the work performed and cover lead-based paint and asbestos.” and “All certificates must name KCHA and its funding entities as additional insureds.”

Read the agency’s insurance section before you ask for certificates, because the holder, the additional insured wording and any pollution line come from that agency’s contract. Our general liability, workers’ compensation and commercial auto pages explain the general liability, workers’ compensation and automobile lines named above, and insulation business insurance is the route into the full set.

State registration rules beside the agency’s contract

The agency’s contract sits beside the state’s own contractor rules, and Iowa’s template and the King County Housing Authority’s page above ask for proof of them. In Iowa, the contractor registration chapter says “A contractor doing business in this state shall register with the director and shall meet all of the following requirements as a condition of registration:”, a chapter that excludes a person who earns less than the amount it sets and a person doing work on the person’s own property; the Iowa rule it points to lists “Insulation installation, buildings—contractors”; the Iowa page sets out the rest.

Vermont’s statute names the work outright. Under the state’s residential construction statute, “A person shall register with the Office of Professional Regulation prior to contracting with a homeowner to perform residential construction” above the contract value the statute sets, and its definition says residential construction “includes interior and exterior construction, renovation, and repair” and names “weatherization”, as the Vermont page sets out.

In New Jersey, the home improvement statute applies to residential property, and it says “Home improvement shall also include insulation, installation, and the conversion of existing commercial structures into residential property.”, and, in the statute’s registration section, no contractor business may offer or attempt the residential home improvement trade “unless registered with the Division of Consumer Affairs”, as the New Jersey page explains. North Carolina’s licensing board rule lists an insulation specialty, S(Insulation), that “covers the installation, alteration, or repair of materials classified as insulating media”, and the North Carolina page gives the cost line in the general contractor licensing statute that the licensing law turns on. Washington’s contractor registration statute says “Every contractor shall register with the department.”, and the Department of Labor and Industries says “State law also requires construction contractors to be bonded and insured to protect the public.”; the Washington page has the details. For other states, start with our licensing guide.

What to bring to the agency

Bring the paperwork the agencies above ask for:

  • the agency’s contractor application and contract, and the state’s field guide, read before you bid;
  • certificates of insurance with the holder and additional insured wording the contract names;
  • a copy of your state registration or license, and the federal tax form the agency names;
  • lead-safe firm and renovator certificates, and any asbestos or OSHA training the agency lists;
  • your crew’s weatherization training, and whatever proof of it the agency’s contract names.

Once the contract is in hand, name the policies its insurance section lists when you send a quote request.

How an insulation contractor reaches a weatherization job, from the federal grant to the final inspection

A flow from the federal program down to the job. The Department of Energy funds the state’s weatherization office. The state office contracts with local agencies and keeps the field guide. A local agency, such as a community action agency, takes contractors on under its own contract, and some keep a contractor list. The energy audit sets the scope, and the work order shows the performance the audit calls for. A certified inspector checks the finished work against the field guide and the specifications. No figures are shown.

Frequently asked questions

How to become a weatherization contractor: where do you start?

Start with your state’s weatherization office and the local agencies it funds. The Department of Energy says the program “is administered at the state and local level.”, and that these local organizations “use in-house crews and private contractors to perform the weatherization services for low-income families.” In Iowa, the state’s contract template says “Any Contractor interested in working on homes for the Iowa Weatherization Program may file an application for the Approved Contractors list.” Ask the agency in your county how it selects contractors.

What does weatherization include in the federal program?

The Department of Energy says its program takes a “whole house weatherization” approach that works from an energy audit. Its list of building shell measures includes “Install wall, floor, ceiling, attic, and/or foundation insulation.”, “Complete Blower Door Testing.” and “Perform air sealing.” DOE says providers check the building envelope and major energy systems for occupant health or safety concerns before installing any measure, and, where a roof leaks, that “either the roof is repaired before the insulation is installed or the home is deferred until repairs can be made.”

Weatherization contractors: who hires them under the federal program?

Local organizations do. The Department of Energy says that after it awards the grants, “the states, tribes, and territories contract with” local organizations it describes as “community action agencies, other nonprofits, and local governments.” It says these organizations “use in-house crews and private contractors”. North Carolina’s insulation subcontract form, marked “Last Updated 4/2015”, shows how a selection can read: the local agency used “its agency procurement procedures” and found the subcontractor to be “the lowest responsible bidder”.

Home weatherization contractors: what standard does the work have to meet?

Under the Department of Energy’s Quality Work Plan notice, “The Standard Work Specifications (SWS) define the minimum acceptable outcomes for home energy upgrades installed on single-family, multifamily, and manufactured housing.” The state’s field guide carries them to the job: its installation standards, when a state submits its guide, “must meet or exceed the minimum standards outlined in the current SWS”, for the tasks the SWS lists. The notice also says “Final inspections must be led by a QCI.”, a certified Quality Control Inspector, apart from programs that install no envelope measures.

Weatherization contractors near me: how do you find the agencies that hire them?

Look at your state’s weatherization website. The Department of Energy says a state, tribal or territorial website “may provide a list of the local organizations or providers that offer weatherization services”, and that “This list is usually organized by county”. That list is written for households applying for help, but a contractor can use it to see whom to call. Ask each agency serving your counties for its contractor application and its contract, and for the state’s field guide.

Weatherization contractor insurance: what do the agencies ask for?

The documents we read list different terms. Iowa’s contract template calls for a certificate of insurance that lists commercial general liability, workers’ compensation (or a signed waiver where the contractor is exempt) and automobile coverage, and on pollution coverage it says “Although POI coverage is no longer required, it is recommended by the U.S. Department of Energy (DOE).” The King County Housing Authority in Washington asks for certificates that include “contractor’s pollution legal liability”, and says “All certificates must name KCHA and its funding entities as additional insureds.”

Become a weatherization contractor: do you still need a state registration?

The agency’s contract can ask you to prove it. Iowa’s template asks the contractor “to furnish a copy of an Iowa Contractors Registration card to the Agency.”, and the state’s contractor registration chapter says “A contractor doing business in this state shall register with the director and shall meet all of the following requirements as a condition of registration:”. In Vermont, the statute’s definition of residential construction names “weatherization”. Each state’s own page sets out its rule and its limits.