States we serve
Washington Insulation Contractor Insurance
Washington has every contractor register with the Department of Labor & Industries under RCW 18.27, with a surety bond or an assigned savings account, and liability insurance or an assigned account, on file. Workers’ compensation comes from the state fund or from qualifying as a self-insurer under RCW 51.14.010, and L&I says the state does not allow private workers’ compensation coverage.
An insulation contractor in Washington registers with the Department of Labor & Industries: under RCW 18.27.020, “Every contractor shall register with the department”, and L&I says “State law also requires construction contractors to be bonded and insured to protect the public.” For employees, RCW 51.14.010 allows insuring with the state fund or qualifying as a self-insurer, and L&I says “Washington State does not allow private workers’ compensation coverage. You must purchase your coverage from L&I or be a certified self-insured employer.” The installation itself answers to the 2021 Washington State Energy Code. The registration rules come first, and with them the general liability insurance a registrant furnishes unless it files an assigned account instead.
RCW 18.27.020 registration with L&I and the “Insulation and acoustical” specialty in WAC 296-200A-016
Washington’s contractor law is a registration law. RCW 18.27.010(1)(a) reaches anyone who, “in the pursuit of an independent business undertakes to, or offers to undertake, or submits a bid to, construct, alter, repair”, or otherwise works on a building or other improvement attached to real estate. L&I’s rule WAC 296-200A-016 defines the specialties “for the purpose of contractor registration only”, and its “Insulation and acoustical” entry reads: “A contractor in this specialty installs, alters, and repairs insulation materials used for the nonmechanical control of heat, sound, and moisture for use in the construction of structures and equipment.”
L&I’s Application for Construction Contractor Registration lists the specialty trade type “SO Insulation, moisture control and acoustical”, worded differently from the rule’s “Insulation and acoustical”, and says a specialty contractor “may only perform the trade selected”. The department’s registration page says “Specialty contractors can only perform work in the specialty they are registered in. They cannot hire subcontractors.” The statute, RCW 18.27.010(12), says “A specialty contractor may only subcontract work that is incidental to the specialty contractor’s work.”
The RCW 18.27.040 surety bond, the RCW 18.27.050 insurance filing and L&I as certificate holder
The bond comes first. RCW 18.27.040(1) says “(1) Each applicant shall file with the department a surety bond issued by a surety insurer who meets the requirements of chapter 48.28 RCW in the sum of $30,000 if the applicant is a general contractor or $15,000 if the applicant is a specialty contractor.” Insurance follows: RCW 18.27.050 says “(1) At the time of registration and subsequent reregistration, the applicant shall furnish insurance or financial responsibility in the form of an assigned account in the amount of fifty thousand dollars for injury or damages to property, and one hundred thousand dollars for injury or damage including death to any one person, and two hundred thousand dollars for injury or damage including death to more than one person.” A contractor that chooses the assigned account must, under RCW 18.27.050(3)(c), notify each person it contracts with or bids to “that the contractor has filed an assigned account in lieu of insurance”.
L&I says “Your bond and insurance must use your exact business name, and L&I must be listed as a certificate holder for your liability insurance.” Under RCW 18.27.050(2), an expiration, cancellation or revocation of the policy “automatically suspends the registration issued to the registrant until a new insurance policy or reinstatement notice has been filed and approved as provided in this section”, and RCW 18.27.040(1) does the same for a canceled or revoked bond. The certificate L&I holds is for the liability policy, so a gap in that line reaches the registration itself.
RCW 51.14.010: insuring with the state fund or qualifying as a self-insurer
Workers’ compensation is where Washington parts ways with a contractor’s other insurance. RCW 51.14.010 says “Every employer under this title shall secure the payment of compensation under this title by: (1) Insuring and keeping insured the payment of such benefits with the state fund; or (2) Qualifying as a self-insurer under this title.” The definitions in RCW 51.08.175 say “"State fund" means those funds held by the state or any agency thereof for the purposes of this title. The "state of Washington industrial insurance fund" means the department when acting as the agency to insure the industrial insurance obligation of employers.” Self-insurance is the other route the statute names, and RCW 51.14.020 says “(1) An employer may qualify as a self-insurer by establishing to the director’s satisfaction that he or she has sufficient financial ability to make certain the prompt payment of all compensation under this title and all assessments which may become due from such employer.”
The registration file asks for the proof. RCW 18.27.030(1)(c) requires the application to include “Evidence of workers’ compensation coverage for the applicant’s employees working in Washington”, and among the forms it lists are “The applicant’s industrial insurance account number issued by the department” and “The applicant’s self-insurer number issued by the department”.
RCW 51.12.070 premiums on contracted work, the permit bar and the RCW 51.08.181 registration test
For a contractor who lets work to others, RCW 51.12.070 says “The provisions of this title apply to all work done by contract; the person, firm, or corporation who lets a contract for such work is responsible primarily and directly for all premiums upon the work, except as provided in subsection (2) of this section.” Under RCW 51.12.070(1), a registered contractor “is not responsible for any premiums upon the work of any subcontractor if” every condition the subsection lists holds, among them “(e) The subcontractor has an industrial insurance account in good standing with the department or is a self-insurer.” The same section reaches the permit counter: “It is unlawful for any county, city, or town to issue a construction building permit to any person who has not submitted to the department an estimate of payroll and paid premium thereon as provided by chapter 51.16 RCW of this title or proof of qualification as a self-insurer.”
Under RCW 51.08.181, an individual doing work that requires registration under chapter 18.27 RCW under an independent contract is not a worker when the conditions the section lists are met, among them that “On the effective date of the contract of service, the individual has a valid contractor registration pursuant to chapter 18.27 RCW”.
L&I’s out-of-state page says “Washington State law does not allow for private workers’ compensation coverage. You must purchase your coverage from L&I or be a certified self-insured employer.” Under its heading for nonreciprocal states, it says “You must report all work done in Washington that requires a contractor registration, or an electrical or plumbing license.”
RCW 19.27A.015 and the State Building Code Council’s code in each city, town and county
RCW 19.27A.020(1) says “(1) The state building code council in the department of enterprise services shall adopt rules to be known as the Washington state energy code as part of the state building code.” Except as RCW 19.27A.020(7) provides, RCW 19.27A.015 makes the residential code “the maximum and minimum energy code for residential buildings in each city, town, and county”, while the nonresidential code is “the minimum energy code for nonresidential buildings enforced by each city, town, and county.”
The code in force is the 2021 Washington State Energy Code, which the council’s energy code page lists as WAC 51-11C (Commercial) 2nd Edition (Jan 2024) and WAC 51-11R (Residential) 2nd Edition, 2nd Printing (Sept 2024), based on the 2021 IECC. Section R101.1 of the residential provisions says “The Washington State Energy Code adopted under chapter 51-11R WAC shall become effective in all counties and cities of this state on March 15, 2024”, and section C101.1 says the same of chapter 51-11C WAC.
An update is in rulemaking and has not been adopted. The council’s code adoption cycle page lists the 2024 Washington State Energy Code - Commercial and the 2024 Washington State Energy Code - Residential as proposed rules, each with “CR-103 Adopted Rule (date tbd) (Any amendment not listed or modified was carried over from 2021)”.
Signed, dated and posted on the job site: the installer certification for SPF, blown fiberglass and cellulose
Section R303.1.1 of the residential provisions has the manufacturer mark each piece of building thermal envelope insulation at or above the width it sets, and offers an alternative: “the insulation installers shall provide a certification listing the type, manufacturer and R-value of insulation installed in each element of the building thermal envelope.” For a spray foam crew, the section adds: “For sprayed polyurethane foam (SPF) insulation, the installed thickness of the areas covered and R-value of installed thickness shall be listed on the certification.”
For blown or sprayed fiberglass and cellulose, the work of loose-fill installers, the section lists “the initial installed thickness, settled thickness, settled R-value, installed density, coverage area and number of bags installed”. It ends: “The insulation installer shall sign, date and post the certification in a conspicuous location on the job site.” Section C303.1.1 of the commercial provisions carries the same sentence, and the residential provisions tie the rating to federal law: “R303.1.4 Insulation product rating. The thermal resistance (R-value) of insulation shall be determined in accordance with the U.S. Federal Trade Commission R-value rule (C.F.R. Title 16, Part 460) in units of h × ft2 × °F/Btu at a mean temperature of 75°F (24°C).”
WISHA, the Division of Occupational Safety and Health and L&I’s isocyanate publication
OSHA’s State Plans page marks Washington “WA*”, and its asterisk note describes State Plans “that cover both private and state and local government workplaces.” L&I’s guide to workplace safety and health says “The Department of Labor & Industries (L&I) administers WISHA through its Division of Occupational Safety and Health (DOSH).” and “OSHA monitors and partially funds DOSH.”
For spray polyurethane foam work, an L&I SHARP publication on isocyanate-based foam, which is guidance and not a rule, says “Isocyanates are a family of chemicals that are well known to cause work-related asthma” and advises “Never apply isocyanate products in an occupied area.” The EPA’s archived page on safer workplace practices for spray foam installation tells crews to “Isolate the work site to prevent isocyanates and other chemical vapors from spreading to other rooms or floors.”
RCW 18.27.110 verification and the RCW 18.27.130 license-fee proviso at city permit counters
RCW 18.27.110 says “(1) No city, town or county shall issue a construction building permit for work which is to be done by any contractor required to be registered under this chapter without verification that such contractor is currently registered as required by law.” RCW 18.27.130 bars a political subdivision from requiring registrations, licenses or bonds “for the same or a similar purpose”, but keeps the authority of a city or town “to levy and collect a general and nondiscriminatory license fee levied upon all businesses, or to levy a tax based upon gross business conducted by any firm within said city”. Each card reports what that city’s own office says.
Seattle
The Seattle Department of Construction and Inspections says “In Seattle, verification is completed by adding the contractor information to your SDCI building permit record.” Seattle’s City Finance page adds: “Subcontractors need a Seattle business license tax certificate even if the contractor who they are working with already has one.”
Tacoma
Under its heading for general contractors, the business-license tip sheet from Tacoma’s Planning and Development Services says “All sub-contractors working at a job site in Tacoma must also be licensed with the City of Tacoma.” A sub working under a general contractor on a Tacoma site needs a city license of its own, beside its L&I registration.
Bellevue
Bellevue’s Development Services page says “The City of Bellevue cannot issue a building permit without verifying that the contractor is currently registered as required by law.” It warns that “a property owner who uses an unlicensed contractor will not be protected by the contractor’s bond required by RCW 18.27.040.”
Vancouver
The City of Vancouver requires a city business license (an “endorsement”) of a business physically located within city limits or whose “staff engage in business within city limits”. Its commercial permits page says single trade permits not related to a building permit “can be purchased by the property owner or a licensed contractor through the Online Permit Center.”
Renton
Renton’s building permit FAQ says “We require a State of WA Contractor’s License and City of Renton Business License prior to the issuance of any permit.” It adds: “Any work within the public right of way or on City-owned facilities shall be performed by a licensed and bonded contractor.”
Spokane Valley
On its page for businesses improving a commercial space, the City of Spokane Valley says “If you hire a contractor, use only Department of Labor and Industries licensed contractors. Your contractors will also need to hold City of Spokane Valley business licenses to pull permits.” Its Permit Center issues the permits for new construction of, and alterations to, commercial buildings.
Card sources: SDCI’s contractor registration tip, Seattle City Finance, Tacoma’s business-license tip sheet, Bellevue’s contractor registration requirements, Vancouver’s commercial building permits, Renton’s building permits FAQ and Spokane Valley’s guide for a commercial space.
Liability, auto, equipment and umbrella lines beside a state fund account
RCW 18.27.050 and L&I’s certificate-holder rule put general liability inside a Washington registration for any contractor not using an assigned account. Workers’ compensation sits apart: under RCW 51.14.010 it comes from the state fund or from qualifying as a self-insurer. The rules quoted on this page do not reach the other lines on our coverage pages: commercial auto, tools and equipment, umbrella liability and commercial property. The insulation business insurance overview shows how those lines fit together, and the trade pages for spray foam contractors and fiberglass installers take each trade in turn.
Through Wexford Insurance, LLC, an independent insurance agency, Insulation Contractor Insurance places coverage for insulation contractors. Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor. The quote form asks for the state you are based in, what you install, your number of field employees and the coverage you want to talk about.
Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.
- Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.
- In this state, workers’ comp comes from the state fund unless the employer qualifies to self-insure; we place the rest of your coverage.
A chart of what Washington requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A state license or registration names insulation work. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The Washington State Energy Code-Residential and the Washington State Energy Code-Commercial, statewide; an update is pending. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Bought from the state fund unless the employer qualifies to self-insure. No connector is drawn for this row. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. In this state, workers’ comp comes from the state fund unless the employer qualifies to self-insure; we place the rest of your coverage. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.
Washington coverage, services and state offices
What we insure
Coverage lines
Washington insulation contractor insurance questions
Washington contractor license requirements: what does RCW 18.27 ask of an insulation business?
Washington’s statute uses the word registration. Under RCW 18.27.020, “Every contractor shall register with the department”, meaning the Department of Labor & Industries. Its rule WAC 296-200A-016 defines, for the purpose of contractor registration only, an “Insulation and acoustical” specialty: “A contractor in this specialty installs, alters, and repairs insulation materials used for the nonmechanical control of heat, sound, and moisture for use in the construction of structures and equipment.” L&I adds: “State law also requires construction contractors to be bonded and insured to protect the public.”
Washington contractor registration: what must the bond and insurance filings show?
L&I says “Your bond and insurance must use your exact business name, and L&I must be listed as a certificate holder for your liability insurance.” Under RCW 18.27.050(2), “An expiration, cancellation, or revocation of the insurance policy or withdrawal of the insurer from the insurance policy automatically suspends the registration issued to the registrant until a new insurance policy or reinstatement notice has been filed and approved as provided in this section.” RCW 18.27.040(1) gives a canceled or revoked bond, or a surety’s withdrawal, the same effect on the registration.
Is workers comp required in Washington, and can a private insurer write it there?
RCW 51.14.010 says “Every employer under this title shall secure the payment of compensation under this title by: (1) Insuring and keeping insured the payment of such benefits with the state fund; or (2) Qualifying as a self-insurer under this title.” The Department of Labor & Industries says “Washington State does not allow private workers’ compensation coverage. You must purchase your coverage from L&I or be a certified self-insured employer.”
Washington workers comp exemption: which owners and officers does RCW 51.12.020 leave out?
RCW 51.12.020 lists “the only employments which shall not be included within the mandatory coverage of this title”, and its list includes “Sole proprietors or partners.” For corporate officers, RCW 51.12.020(8)(a) begins “Except as otherwise provided in (b) of this subsection” and lists a “bona fide officer of a corporation voluntarily elected or voluntarily appointed” who “at all times during the period involved is also a bona fide director, and who is also a shareholder of the corporation.” It adds “Only such officers who exercise substantial control in the daily management of the corporation and whose primary responsibilities do not include the performance of manual labor are included within this subsection.” Subsection (b) sets a separate alternative for a corporation that is not a public company.
Washington energy code: is the update the State Building Code Council proposed in force yet?
Not yet. The 2021 Washington State Energy Code is the code in force: section R101.1 of its residential provisions says “The Washington State Energy Code adopted under chapter 51-11R WAC shall become effective in all counties and cities of this state on March 15, 2024”, and section C101.1 says the same of chapter 51-11C WAC. The council lists the 2024 Washington State Energy Code - Residential and the 2024 Washington State Energy Code - Commercial as proposed rules, each with “CR-103 Adopted Rule (date tbd) (Any amendment not listed or modified was carried over from 2021)”.
Washington insulation requirements: what goes on the installer’s certification?
Section R303.1.1 of the residential energy code offers a certification as the alternative to the manufacturer’s R-value mark: “the insulation installers shall provide a certification listing the type, manufacturer and R-value of insulation installed in each element of the building thermal envelope.” For blown or sprayed fiberglass and cellulose, the certification also lists initial installed thickness, settled thickness, settled R-value, installed density, coverage area and number of bags installed. “The insulation installer shall sign, date and post the certification in a conspicuous location on the job site.”
Spray foam insulation Washington: what do the energy code and L&I say about SPF work?
Under section R303.1.1 of the residential energy code, “For sprayed polyurethane foam (SPF) insulation, the installed thickness of the areas covered and R-value of installed thickness shall be listed on the certification.” On the health side, an L&I SHARP publication, which is guidance rather than a rule, names “Spray-foam insulation installers” among the workers at risk from isocyanates, calls isocyanates “well known to cause work-related asthma” and recommends “Isocyanate-based products should be used inside a spray booth or with adequate ventilation.”
General liability insurance Washington: what does RCW 18.27.050 ask for at registration?
RCW 18.27.050 says “(1) At the time of registration and subsequent reregistration, the applicant shall furnish insurance or financial responsibility in the form of an assigned account in the amount of fifty thousand dollars for injury or damages to property, and one hundred thousand dollars for injury or damage including death to any one person, and two hundred thousand dollars for injury or damage including death to more than one person.” A contractor that files the assigned account must tell each customer or bid recipient that it “has filed an assigned account in lieu of insurance”.
This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Washington insulation work
A Washington quote starts with where your crews are based, the insulation they install, the size of your field crew and the lines you want to review.