States we serve
Utah Insulation Contractor Insurance
Utah’s construction trades licensing rule puts insulating media inside a broader specialty scope and inside the roofing scope for the sole purpose of the ends that scope names, under licenses the Division of Professional Licensing issues. Utah Code 34A-2-201 has an employer secure workers’ compensation through an insurer authorized under Title 31A or approval as a self-insured employer, and Utah Code 15A-2-103 incorporates the IRC and IECC editions it names.
An insulation contractor working in Utah meets a licensing rule that consolidated its former insulation classification into a broader specialty scope, a workers’ compensation statute that binds the employers it reaches, and statewide amendments to the International Energy Conservation Code. Under Utah Admin. Code R156-55a-301aa (see the Division’s Laws and Rules page), the specialty classification whose scope names insulating media takes in “insulating media in buildings and structures for temperature control, sound control, fireproofing, mechanical insulation of pipes, ducts, or conduits”, and Utah Code 34A-2-201 says “An employer shall secure the payment of workers’ compensation benefits for its employees”.
Insulating media in R156-55a-301aa and, for the sole purpose of the ends it names, in R156-55a-301ai
The rule section that sets that specialty scope also says “An S270 licensee providing services under this Chapter may not subcontract or hire any person to perform work on a project outside the scope defined in Subsection R156-55a-301aa(1).” Utah Admin. Code R156-55a-301am adds a limit for every specialty licensee: “Specialty Contractors shall be confined to the field and scope of work designated in this rule.”
Insulating media also sit inside the roofing classification. Under Utah Admin. Code R156-55a-301ai, its scope includes “installation of any insulating media in buildings and structures for the sole purpose of temperature control, sound control, fireproofing, and mechanical insulation of pipes, ducts, or conduits”.
The Division’s rule filing in the Utah State Bulletin records the consolidation: “S250 Insulation Contractor, S272 Ceiling Grid Systems, Ceiling Tile, and Panel Systems Contractor, S273 Light-weight Metal and Non-Bearing, and S300 General Painting Contractor classifications are consolidated into the S270” classification, and “The scope of practice for the S280 Roofing Contractor is expanded to include insulating media.” The scope lines quoted above name insulating media rather than a material, so they read the same for fiberglass crews and for spray foam crews.
Utah Code 58-55-301 and 58-55-305(1)(h): licensure unless specifically exempted
Utah Code 58-55-301 says a person engaged in the construction trades licensed under the chapter, or as a contractor regulated under it, “shall become licensed under this chapter before engaging in that trade or contracting activity in this state unless specifically exempted from licensure under Section 58-1-307 or 58-55-305”. The Division of Professional Licensing issues those licenses in listed classifications that include “specialty contractor”.
Utah Code 58-55-305(1)(h)(i) exempts from licensure, subject to Utah Code 58-1-401(2), 58-55-501 and 58-55-502 and to the trade carve-outs that follow it, “a person engaged in the alteration, repair, remodeling, or addition to or improvement of a building with a contracted or agreed value of less than $7,000, including both labor and materials, and including all changes or additions to the contracted or agreed upon work”. Under Utah Code 58-55-305(1)(h)(ii)(H), if the total value of the project is above the figure that subsection sets, a person relying on that exemption “shall file with the division a one-time affirmation, subject to periodic reaffirmation as established by division rule, that the person has” “public liability insurance in coverage amounts and form established by division rule” and, “if applicable, workers compensation insurance which would cover an employee of the person if that employee worked on the construction project”.
A version of Utah Code 58-55-105 marked “(Effective 1/1/2027)” says “A person engaged in a construction trade or acting as a contractor shall obtain a license under this chapter before performing work unless exempt from licensure under Section 58-1-307 or 58-55-110”.
R156-55a-302d and the Division of Professional Licensing as certificate holder
Under Utah Admin. Code R156-55a-302d (see the Division’s Laws and Rules page), a license applicant’s liability insurance must have “the Division named as a certificate holder”, must provide “coverage for the scope of work performed” and must be “in force for the entire duration of licensure”, at the minimum coverage amounts the rule sets. For workers’ compensation, the rule calls for a policy “that names the Division as a certificate holder” or “an affidavit that the applicant does not hire employees” with a valid coverage waiver from the Utah Labor Commission. The Division’s specialty contractor application page asks for a general liability certificate and, “If you have employees”, a workers’ compensation certificate.
Title 31A insurers, self-insured employers and the fund that became a mutual under Utah Code 31A-22-1014
Utah Code 34A-2-201 names the routes: insuring “with an insurer authorized under Title 31A” and “to transact the business of workers’ compensation insurance in this state”, or approval to pay direct compensation “as a self-insured employer”. Who counts as an employer is set by Utah Code 34A-2-103(2)(a): “(a) Subject to the other provisions of this section, each person, including each public utility and each independent contractor, that regularly employs one or more workers or operatives in the same business, or in or about the same establishment, under any contract of hire, express or implied, oral or written, is considered an employer under this chapter”.
Under Utah Code 31A-22-1014, Utah’s former statute-created workers’ compensation fund was to “convert from a quasi-public corporation to a mutual insurance corporation subject to Chapter 5, Domestic Stock and Mutual Insurance Corporations”, and “The state is not liable for the expenses, liabilities, or debts of” the mutual insurance company or of “the nonprofit, quasi-public corporation that preceded the mutual insurance company”.
Subsection (7) of Utah Code 34A-2-103 and the Workers’ Compensation Coverage Waiver
Under Utah Code 34A-2-103(7), if an employer has work done by a contractor “over whose work the employer retains supervision or control, and this work is a part or process in the trade or business of the employer”, the contractor, the contractor’s employees, subcontractors and their employees “are considered employees of the original employer”. The same subsection says a contractor or subcontractor “is not an employee of the employer” if the hiring employer “obtains and relies on” either “a valid certification of the contractor’s or subcontractor’s compliance with Section 34A-2-201” or, for an entity with no employees other than its owners, partners or officers, a coverage waiver.
Compliance with Utah Code 34A-2-201 means workers’ compensation insurance with an authorized insurer or approval as a self-insured employer. The Commission’s waiver page says individuals with no employees who hire out their services “may be considered” statutory employees and may waive coverage “by obtaining a Workers’ Compensation Coverage Waiver (WCCW).” The Commission’s employers page says corporations that contract out their work, “for example construction contractors”, are not eligible for its corporate exclusion and “should apply for a workers’ compensation coverage waiver.”
Utah Code 15A-2-103, Utah Code 15A-3-701 and the approved blower door testers
Utah Code 15A-2-103 incorporates by reference, as part of the state construction code, the 2021 edition of the International Residential Code and the 2024 edition of the International Energy Conservation Code, each “issued by the International Code Council”, with the statewide amendments of Chapter 3 and the local amendments of Chapter 4. The version of Utah Code 15A-2-103 served as current is marked “(Effective 7/1/2026) (Superseded 1/1/2027)”, and the version marked “(Effective 1/1/2027)” lists the same editions.
Utah Code 15A-3-701 adopts amendments to the IECC “to be applicable statewide”, among them approval of blower door testing by “Parties certified by BPI or RESNET, or licensed contractors who have completed training provided by Blower Door Test equipment manufacturers or other comparable training.”
A new Section R402.2.1.3, “Walls with Air-Impermeable Insulation”, deems an air-impermeable insulation installed in the wall cavity at the R-values it sets equivalent to the IECC wall table “provided the home attains a blower door test” at the level it states. Another amendment adds IECC Section R402.2.1.1 on “Unvented attic and unvented enclosed rafter assemblies” conforming to Section R806.5, with R-values that “shall be permitted provided all the following conditions are met”; those conditions are set out in the statute itself.
The Utah Occupational Safety and Health Division, NIOSH’s archived isocyanate page and R156-55a-301an’s asbestos line
Utah carries the “UT*” mark on OSHA’s State Plans page, whose footnote describes plans that “cover both private and state and local government workplaces”. The Utah Labor Commission says “occupational safety and health in the state falls under the authority of the State of Utah Labor Commission”, through its Utah Occupational Safety and Health Division.
For spray foam contractors, the EPA’s contractor-client checklist for professionally installed high-pressure spray polyurethane foam insulation says “it is not a regulatory compliance tool”, but that “some of the best practices included in the checklist may be required under local, state or federal worker protection or other regulations.” The Consumer Product Safety Commission’s spray foam fact sheet, written for consumers, says “Contractors should use safe work practices to reduce or prevent exposures to homeowners at every stage of SPF installation.” On a page now kept in the CDC archive, NIOSH says isocyanates are used in “building insulation materials”.
Under the Federal Trade Commission’s R-value rule, 16 CFR 460.17, an installer “must give your customers a contract or receipt for the insulation you install”, and for loose-fill the receipt must show the coverage area, “initial installed thickness, minimum settled thickness, R-value, and the number of bags used.” It is a national rule, and its receipt duty reaches fiberglass installers as it reaches spray foam installers.
The EPA says “You should assume that vermiculite insulation is from Libby and treat the material as if it contained asbestos”, and Utah Admin. Code R156-55a-301an says “asbestos removal regulated by the Department of Environmental Quality” does not require a contractor license because other agencies regulate it.
St. George’s insulation certificates, West Valley City’s subcontractor verification form and Sandy City’s permit for all construction
Salt Lake City
Salt Lake City’s permit-issuance guide says a general contractor licensed through the State of Utah “must be added to the permit prior to permit issuance”, pointing to “Refer to Salt Lake City Ordinance 18.20.060: PERMIT; ISSUED TO LICENSED CONTRACTORS ONLY”. Its business page says “A business license is required to engage in business in Salt Lake City whether you are located within the boundary, or simply conducting business in the city.” Utah Code 58-55-301(1)(b) makes the state license and the business license of the jurisdiction holding the licensee’s principal place of business “the only licenses required for the licensee to engage in a trade licensed by this chapter, within the state.”
West Valley City
West Valley City’s building inspections FAQ says “In accordance with State law, a building permit can only be issued to a licensed contractor.” At permit issuance “the license number of the general contractor must be verified”, and the Building Inspection Division requires “a completed subcontractor verification form”.
Orem
The City of Orem’s Residential Remodel Checklist says “Homeowners may legally work on their own home” but “All work not performed by the homeowner must be done by properly licensed contractors.” The state’s Owner/Builder Certification, linked from Orem’s forms page, lists who may perform the work, including “a licensed contractor” and employees on whom the owner has “Workers Compensation Insurance coverage”.
St. George
The City of St. George’s residential final inspection checklist, marked “(Not a complete list)”, includes “Stucco and Insulation certificates.” Its IRC/IECC Code Compliance Certification asks for a certification, signed by a tester, that “the dwelling thermal envelope will comply with” the IRC’s air barrier and insulation installation table or a “Whole House Pressure Test (Blower Door)”.
Ogden
Ogden City says “A business license is the city’s permission to operate a legal business within the boundaries of Ogden City and is required per OMC (Ogden Municipal Code) 5-1A-2”, and that a business license “may require approvals from a variety of other agencies, including” the “Utah Division of Professional Licensing”. Utah Code 58-55-301(1)(b) names the state license and the principal-place-of-business jurisdiction’s business license as “the only licenses required for the licensee to engage in a trade licensed by this chapter, within the state.”
West Jordan
The City of West Jordan’s business licensing page lists, among the documents required to apply for a business license, a “Copy of DOPL (Professional License), if applicable.” Utah Code 58-55-301(1)(b), for its part, says the state license and the business license “issued by the local jurisdiction in which the licensee has its principal place of business shall be the only licenses required for the licensee to engage in a trade licensed by this chapter, within the state.”
Provo
Provo City’s building permit FAQs say, for commercial projects, “A properly licensed contractor is required for commercial construction projects. Contractors must hold the appropriate State of Utah contractor license for the work being performed.” For residential work, “Contractors performing work that requires a professional or trade license must be appropriately licensed unless otherwise exempt under State law”.
Sandy
Sandy City’s building permits page says “A Building Permit is required for all construction within Sandy City.” The same page lists editions of the IRC and the IECC under “Applicable Building Codes”, a list that speaks for Sandy City; the statewide incorporation of those codes is Utah Code 15A-2-103.
The Lien Recovery Fund the Division says is “currently unable to pay new claims”
On its fund information page, the Division of Professional Licensing says the Lien Recovery Fund “is currently unable to pay new claims” and that “Contractors, subcontractors, and suppliers must pursue other legal remedies to resolve payment disputes.”
The Division’s application page asks for the R156-55a-302d liability certificate as a general liability certificate, and Utah Code 34A-2-201 is met through workers’ compensation insurance with an insurer authorized under Title 31A or by approval as a self-insured employer. Utah crews can begin from the insulation contractor insurance page.
Through Wexford Insurance, LLC, an independent insurance agency, Insulation Contractor Insurance places coverage for insulation contractors. Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor. Your number of field employees, what you install, the state you are based in and the coverage you want to talk about are what the quote form asks.
Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.
- Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.
A chart of what Utah requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A broader state classification now takes in insulation work; the law sets a threshold for when it applies. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The International Residential Code and the International Energy Conservation Code, statewide. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market; the law sets a threshold for which employers it covers. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.
Utah coverage, services and state offices
What we insure
Coverage lines
Utah insulation contractor insurance questions
Utah contractor license requirements: where does insulation work sit in the Division of Professional Licensing’s rule?
Utah Code 58-55-301 says a person engaged in a construction trade licensed under the chapter “shall become licensed under this chapter before engaging in that trade or contracting activity in this state unless specifically exempted from licensure under Section 58-1-307 or 58-55-305”. Under Utah Admin. Code R156-55a-301aa, the specialty classification whose scope names insulating media includes “insulating media in buildings and structures for temperature control, sound control, fireproofing, mechanical insulation of pipes, ducts, or conduits”, and the roofing scope in R156-55a-301ai reaches insulating media “for the sole purpose of” those ends.
Utah contractor registration: which state offices does a license applicant show registration with?
Under Utah Code 58-55-302, an applicant for a contractor license also files proof of registration, as applicable law requires, with offices that include the “Division of Corporations and Commercial Code”, the “Unemployment Insurance Division in the Department of Workforce Services” and the “State Tax Commission”. Before the license issues, the same section has the applicant file “proof of workers’ compensation insurance that covers employees of the applicant in accordance with applicable Utah law” and proof of public liability insurance, except for a construction trades instructor.
Is workers comp required in Utah under Utah Code 34A-2-201 and 34A-2-103?
Utah Code 34A-2-201 says “An employer shall secure the payment of workers’ compensation benefits for its employees” through an authorized insurer or approval as a self-insured employer. Utah Code 34A-2-103(2)(a) sets who counts: “(a) Subject to the other provisions of this section, each person, including each public utility and each independent contractor, that regularly employs one or more workers or operatives in the same business, or in or about the same establishment, under any contract of hire, express or implied, oral or written, is considered an employer under this chapter”.
Utah workers comp exemption: can a sole proprietor or an LLC waive coverage?
The Utah Labor Commission says individuals with no employees who hire out their services “may be considered” statutory employees and “are allowed to waive their rights to workers’ compensation coverage by obtaining a Workers’ Compensation Coverage Waiver”. It lists as possibly eligible “Sole Proprietorships with no employee other than the owner” and “Partnerships with no employees other than the partners”, and says “Limited Liability Companies are treated as Partnerships”. Corporations that contract out their work, “for example construction contractors”, are not eligible for its corporate exclusion and “should apply for a workers’ compensation coverage waiver.”
Utah energy code: which editions does Utah Code 15A-2-103 incorporate?
Utah Code 15A-2-103 incorporates by reference, as part of the state construction code, the 2021 edition of the International Residential Code and the 2024 edition of the International Energy Conservation Code. Under the same section, “Subject to the other provisions of this part”, those codes, with the statewide amendments of Chapter 3 and the local amendments of Chapter 4, are “the construction standards to be applied to building construction, alteration, remodeling, and repair”. Utah Code 15A-3-701 adds amendments to the IECC “to be applicable statewide”.
Utah insulation requirements: what do the statewide IECC amendments say about walls and unvented attics?
Among the amendments Utah Code 15A-3-701 makes statewide, a new IECC Section R402.2.1.3, “Walls with Air-Impermeable Insulation”, deems an air-impermeable insulation installed in the wall cavity at the R-values it sets equivalent to the IECC wall table “provided the home attains a blower door test” at the level it states. Another adds Section R402.2.1.1 on “Unvented attic and unvented enclosed rafter assemblies” conforming to Section R806.5, whose R-values “shall be permitted provided all the following conditions are met”.
Spray foam insulation Utah: which safety agencies speak to SPF work?
Utah carries the “UT*” mark on OSHA’s State Plans page, whose footnote covers plans that “cover both private and state and local government workplaces”, and the Utah Labor Commission says “the Utah Occupational Safety and Health Division administers the Utah Occupational Safety and Health Act.” In its words, the EPA’s contractor-client checklist for SPF is “a voluntary aid” and “not a regulatory compliance tool”, though it notes that “some of the best practices included in the checklist may be required under local, state or federal worker protection or other regulations.”
General liability insurance Utah: what does the Division of Professional Licensing ask a license applicant to show?
Under Utah Admin. Code R156-55a-302d, a license applicant’s liability insurance must have “the Division named as a certificate holder”, must provide “coverage for the scope of work performed” and must be “in force for the entire duration of licensure”, at the minimum coverage amounts that rule sets. The Division’s specialty contractor application page asks for “a general liability insurance certificate” on which “DOPL is listed as certificate holder”, and R156-55a-302d says “A Licensee shall update the Division immediately regarding any materials changes to the policies”.
This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Utah insulation work
A quote request from a Utah insulation business starts with its home state, its insulation products, its field headcount and the lines of coverage it wants reviewed.