States we serve

Idaho Insulation Contractor Insurance

Subject to the exemptions in Idaho Code § 54-5205, an Idaho contractor registers under the Idaho Contractor Registration Act, and the application carries a general liability certificate and workers’ compensation proof or a statement of why it is not required. Unless Idaho Code § 72-212 exempts the employment, an employer secures workers’ compensation with an authorized insurer or through self-insurance the Industrial Commission approves.

Get a Quote Call 317-942-0549

A worker in work gloves pushing an insulation batt up between ceiling joists — insulation contractor insurance in Idaho

The Idaho Contractor Registration Act makes it unlawful to engage in business or hold yourself out as a contractor in Idaho without registering, unless an exemption in Idaho Code § 54-5205 applies; the application carries a certificate of general liability coverage and workers’ compensation proof or a statement of why it is not required. Separately, Idaho Code § 72-301(1) has every employer secure workers’ compensation with an authorized insurer or through self-insurance the Industrial Commission approves, in employment Idaho Code § 72-212 does not exempt. For spray foam and fiberglass crews alike, the sections below follow those statutes, the Idaho energy conservation code and the local offices.

The reach § 54-5203 gives Idaho’s registration: “or to do any part thereof”

Under Idaho Code § 54-5204(1), “it shall be unlawful for any person to engage in the business of, or hold himself out as, a contractor within this state without being registered as required in this chapter.” Idaho Code § 54-5203 defines construction by building, altering, repairing, improving and other work on any building or improvement to real property, “or to do any part thereof”. The Act names no trade, and no section of it, no board rule and no Division page read for this page names insulation or spray foam; its reach to an insulation business runs through that definition. The Division of Occupational and Professional Licenses’ contractor FAQ says “The Act requires registration, not licensure.”

Idaho Code § 54-5205(2) opens its exemptions with “(2) In addition to the exemption set forth in subsection (1) of this section, registration as provided for in this chapter shall not be required for the following, so long as such person is not acting with the intent to evade this chapter and so long as such person does not hold himself out as a registered contractor:” Paragraph (f) reads: “(f) A person performing work on one (1) undertaking or project considered casual, minor, or inconsequential, whether by one (1) or more contracts, the aggregate contract price of which, for labor and materials and all other items, is less than two thousand dollars ($2,000). The exemptions prescribed in this paragraph (f) shall not apply when the work or construction is part of a larger construction project, whether undertaken by the same or a different construction contractor, or in which a division of the operation is made into contracts of amounts of less than two thousand dollars ($2,000) for the purpose of evasion of this chapter or otherwise;”

Registering in Idaho with a general liability policy “in effect”

Under Idaho Code § 54-5210(1)(e), a registration application includes a certificate from an insurance company authorized in Idaho that the applicant has in effect “a general liability policy, including products and completed operations insurance covering the applicant’s construction operations”, at no less than the single limit that paragraph sets. That certificate is the application’s proof of a general liability policy. Paragraph (d) asks for a certificate or other satisfactory proof that the applicant “has procured and has in effect worker’s compensation insurance or a statement by the contractor as to why such certificate or coverage is not required for the applicant”.

Idaho Code § 54-5215(2)(a) lets the Idaho Contractors Board reprimand, suspend or revoke a registration, or impose a civil penalty, after an opportunity for a hearing, where a contractor has violated the chapter, “including, but not limited to, failure to keep current or provide insurance coverage as required by this chapter”. Between contractors, § 54-5204(2) makes it unlawful to engage another contractor who must register “unless such other contractor furnishes satisfactory proof to the contractor that he is duly registered under the provisions of this chapter.” Under § 54-5208, a contractor who is not registered, unless otherwise exempt, “shall be denied and shall be deemed to have conclusively waived any right to place a lien upon real property”.

Permit presentment under § 54-5209, the § 54-1902 public works license and § 54-5213 on local contractor registration or licensure

Idaho Code § 54-5209(1) says no county, city or district permit authority “shall issue any permit without first requesting presentment of an Idaho contractor’s registration number”, and that the number is entered on the face of the permit. Separately, Idaho Code § 54-1902 makes it unlawful “to engage in the business or act in the capacity of a public works contractor within this state without first obtaining and having a license issued pursuant to the provisions of this chapter”, unless the person is particularly exempted as that chapter provides. On local programs, Idaho Code § 54-5213 reads “(1) On and after January 1, 2007, no incorporated municipality, county, alternative form of local government, or other municipal or political corporation or subdivision of this state shall implement its own program for the registration or licensure of construction contractors.” Its subsection (2) lets a contractor submit a verified copy of a current and unrestricted local credential, issued under an ordinance enacted before that date, to the board for review with a reciprocal registration fee, and a registration issues on reciprocity if the review finds the credential “was granted under provisions that were not less stringent than those provided by this chapter”.

“Every employer shall secure the payment of compensation”, as Idaho Code § 72-301(1) opens

Idaho Code § 72-203 reads “This law shall apply to all public employment and to all private employment including farm labor contracting not expressly exempt by the provisions of section 72-212 , Idaho Code.” Idaho Code § 72-301(1) says “Every employer shall secure the payment of compensation under this law”, by insuring with an insurer the director of the department of insurance authorizes or by self-insurance the Industrial Commission approves.

The Industrial Commission’s employer FAQ says “Employers with one or more full-time, part-time, seasonal, or occasional employees are required to maintain a workers’ compensation policy unless specifically exempt from the law.” It adds “Workers’ Compensation is required to be in place before the first employee is hired.” Idaho law also has the independent body corporate politic that Idaho Code 72-901 creates to insure employers against liability for workers’ compensation, deemed a mutual insurer for purposes of regulation; the Commission’s FAQ calls it “a quasi-governmental entity, NOT a state agency”. Under Idaho Code § 72-319(1), an employer required to secure compensation “who fails to secure the payment thereof shall be guilty of a misdemeanor”.

Idaho’s owner exclusions apply “unless coverage thereof is elected”

Idaho Code § 72-212 says none of the law’s provisions apply, “unless coverage thereof is elected as provided in section 72-213 , Idaho Code”, to “Employment as the owner of a sole proprietorship; employment of a working member of a partnership or a limited liability company”, or to a corporate officer who holds the share of voting stock that paragraph sets and, if the corporation has directors, is also a director.

Under Idaho Code § 72-216(1), “An employer subject to the provisions of this law shall be liable for compensation to an employee of a contractor or subcontractor under him who has not complied with the provisions of section 72-301 in any case where such employer would have been liable for compensation if such employee had been working directly for such employer.” Its subsection (2) adds “The contractor or subcontractor shall also be liable for such compensation, but the employee shall not recover compensation for the same injury from more than one party.” The Industrial Commission says Idaho uses the right to control test and that “those cases where there is doubt about whether a worker is an independent contractor or employee are to be resolved in favor of finding the worker to be an employee.”

An IECC “as amended, revised, or modified by the Idaho building code board and approved by the legislature”

Idaho Code § 39-9701(1) reads “(1) On and after July 1, 2022, the Idaho state energy code shall be the 2018 international energy conservation code, as amended, revised, or modified by the Idaho building code board and approved by the legislature.” IDAPA 24.39.30, the Idaho Building Code Board’s rule, adopts the International Energy Conservation Code – Residential Provisions. The 2018 Edition and the International Energy Conservation Code – Commercial Provisions. The 2018 Edition, each with Idaho amendments. Under § 39-9701(2), local governments may not adopt energy code or energy-related requirements “that differ from or are more extensive than the requirements of the Idaho energy conservation code”, apart from the administrative processes in chapter 1 of that code.

Enforcement runs through local programs. Idaho Code § 39-4116(2) says “(2) Except as otherwise provided in this chapter, local governments that issue building permits and perform building code enforcement activities shall, by ordinance effective January 1 of the year following the adoption by the Idaho building code board, adopt the following codes as published by the International Code Council”, among them the “(c) 2018 Idaho energy conservation code, pursuant to chapter 97, title 39 , Idaho Code.”

Among its residential amendments, IDAPA 24.39.30 replaces the climate-zone rows of “Table R402.1.2 Insulation and Fenestration Requirements by Component” with Idaho’s own rows. An Idaho amendment to Section R402.4.1.2 says “The Permit Holder will determine at the time of permit application the method of determining building envelope tightness” and adds “A visual inspection shall be considered acceptable in lieu of testing when the items listed in Table R402.4.1.1, applicable to the method of construction, are field verified.”

On a spray foam job, “clients should not be present during application and cleanup”

On a spray foam job, the EPA’s contractor and client checklist says “To prevent exposures, clients should not be present during application and cleanup, and for a period of time afterward while the SPF insulation continues to cure.” The checklist says it “was prepared as a voluntary aid to protect against potential risks from SPF; it is not a regulatory compliance tool”, and that “some of the best practices included in the checklist may be required under local, state or federal worker protection or other regulations.”

Idaho appears as “ID” on OSHA’s State Plans page, with neither the mark its key gives State Plans “that cover both private and state and local government workplaces” nor the mark it gives State Plans “that cover state and local government workers only”, and OSHA’s About page says “The OSH Act covers most private sector employers and their workers”.

City and county pages, each quoted as its office prints it

The City of Idaho Falls and the City of Pocatello each print a city contractor’s license requirement, and Nampa’s FAQ speaks of a “licensed sub-contractor in that trade”. Each card quotes its own office as printed, beside the Idaho Code § 54-5213 text above, and claims no reconciliation between them.

Boise

The City of Boise’s homeowner guide says “If you’re not doing all of the work yourself (such as electrical, plumbing or mechanical work), the person performing the work must be a State of Idaho registered and licensed contractor in that trade.” It also says “Homeowners may perform work on their primary residence without registering as a contractor with the State of Idaho”.

Idaho Falls

The City of Idaho Falls says it “requires a person who is performing work, which requires a building permit, within city limits, to obtain an active Contractor’s license with the city.” Its building page says “no inspections can be made until the required permits for performing the work are issued”.

Coeur d’Alene

The City of Coeur d’Alene’s building applications page says “In order to obtain any type of permit, the contractor must hold a current Idaho Contractors Registration Number unless you meet the criteria for an exemption.” An older air barrier and insulation inspection handout linked from that page lists “Rim joists are insulated and include an air barrier.”

Twin Falls

The City of Twin Falls’ new home permit application asks for the contractor’s “State Registration #” and says “Detail insulation material types with notes as to R-value, location and weather protection of thermal envelope for slab, foundation stem walls, mono footings, crawlspaces and/or basement walls.” Its remodel application asks “Contractor registration exempt?”

Nampa

The City of Nampa’s Residential FAQ says “If you’re not performing the work yourself (such as building, electrical, plumbing and mechanical work), the contractor performing the work must be a State of Idaho registered building contractor or a licensed sub-contractor in that trade and must pull permit a permit and perform the work.”

Pocatello

Pocatello’s contractor application lists a “State of Idaho contractor’s license” among what each building class requires and has the applicant acknowledge “I understand that subcontractors hired by the general contractor are required to be licensed with the State of Idaho and the City of Pocatello.” The city’s Contractor Licenses page says “The City of Pocatello is to be named as an additional insured.”

Ada County

Ada County’s building permit application says “Must select the method for Energy Compliance:” and offers “Blower Door Test” or “Visual Inspection”.

Sources: Idaho Falls contractor licensing, Pocatello’s Contractor Licenses page, Nampa’s Residential FAQ and Ada County’s building permit application.

Idaho registration paperwork as a guide to general liability and workers’ compensation

The § 54-5210(1)(e) certificate names a general liability policy, and the § 54-5210(1)(d) proof belongs to workers’ compensation. The insulation contractor insurance page sets out every line, with trade pages on spray foam insurance and fiberglass insulation contractor insurance.

Through Wexford Insurance, LLC, an independent insurance agency, Insulation Contractor Insurance places coverage for insulation contractors. Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor. Your number of field employees, what you install, the state you are based in and the coverage you want to talk about are what the quote form asks.

Idaho: what the state sets for insulation work, what each rule leaves open, and the coverage page that discusses it.
Contractor license A general state license or registration can reach insulation work; the law sets a threshold for when it applies
Injury and damage to others from the work, during the job and after it General Liability
Energy code The International Energy Conservation Code, statewide, for residential and commercial buildings
Damage the finished work causes after you leave General Liability
Workers’ compensation Required for covered employers, bought in the open market
A crew member hurt on the job Workers’ Compensation

Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.

  • Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.

A chart of what Idaho requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A general state license or registration can reach insulation work; the law sets a threshold for when it applies. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The International Energy Conservation Code, statewide, for residential and commercial buildings. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.

Nearby states we also insure

Idaho insulation contractor insurance questions

Idaho contractor license requirements: is it a license or a registration?

The Division of Occupational and Professional Licenses’ contractor FAQ says “The Act requires registration, not licensure.” Under Idaho Code § 54-5204(1), “it shall be unlawful for any person to engage in the business of, or hold himself out as, a contractor within this state without being registered as required in this chapter.” The Act names no trade and defines construction by work on any building or improvement to real property, “or to do any part thereof”. The § 54-5205(2) exemptions hold only while a person is not acting to evade the chapter and does not hold out as registered.

Idaho contractor registration: what insurance proof goes with the application?

Under Idaho Code § 54-5210(1)(e), the application includes a certificate from an insurance company authorized in Idaho that the applicant has in effect “a general liability policy, including products and completed operations insurance covering the applicant’s construction operations”, at no less than the single limit that paragraph sets. Paragraph (d) asks for a certificate or other satisfactory proof that the applicant “has procured and has in effect worker’s compensation insurance or a statement by the contractor as to why such certificate or coverage is not required for the applicant”.

Is workers comp required in Idaho, and how does Idaho Code § 72-301(1) let an employer secure it?

Idaho Code § 72-203 reads “This law shall apply to all public employment and to all private employment including farm labor contracting not expressly exempt by the provisions of section 72-212 , Idaho Code.” Idaho Code § 72-301(1) says “Every employer shall secure the payment of compensation under this law”, through an authorized insurer or approved self-insurance. The Industrial Commission’s employer FAQ says “Employers with one or more full-time, part-time, seasonal, or occasional employees are required to maintain a workers’ compensation policy unless specifically exempt from the law.”

Idaho workers comp exemption: which owners and officers does Idaho Code § 72-212 leave out?

Idaho Code § 72-212 says none of the law’s provisions apply, “unless coverage thereof is elected as provided in section 72-213 , Idaho Code”, to “Employment as the owner of a sole proprietorship; employment of a working member of a partnership or a limited liability company”, or to a corporate officer who holds the share of voting stock that paragraph sets and, if the corporation has directors, is also a director. The Industrial Commission says such owners “may elect coverage through a declaration in writing of the insurance company and the employer.”

Idaho energy code: which edition does the Idaho Building Code Board’s rule adopt?

Idaho Code § 39-9701(1) reads “(1) On and after July 1, 2022, the Idaho state energy code shall be the 2018 international energy conservation code, as amended, revised, or modified by the Idaho building code board and approved by the legislature.” IDAPA 24.39.30 adopts that code’s Residential Provisions and Commercial Provisions, each with Idaho amendments. Idaho Code § 39-9701(2) bars local energy requirements “that differ from or are more extensive than the requirements of the Idaho energy conservation code”, apart from the administrative processes of chapter 1.

Idaho insulation requirements: what do the IDAPA 24.39.30 residential amendments change?

Among its residential amendments, IDAPA 24.39.30 replaces the climate-zone rows of “Table R402.1.2 Insulation and Fenestration Requirements by Component” with Idaho’s own rows. An Idaho amendment to Section R402.4.1.2 says “The Permit Holder will determine at the time of permit application the method of determining building envelope tightness” and adds “A visual inspection shall be considered acceptable in lieu of testing when the items listed in Table R402.4.1.1, applicable to the method of construction, are field verified.”

Spray foam insulation Idaho crews use: what does EPA’s spray foam guidance say?

EPA describes its spray foam checklist as “prepared as a voluntary aid to protect against potential risks from SPF; it is not a regulatory compliance tool”, and that “some of the best practices included in the checklist may be required under local, state or federal worker protection or other regulations.” It says “To prevent exposures, clients should not be present during application and cleanup, and for a period of time afterward while the SPF insulation continues to cure.”

General liability insurance Idaho registrants keep: what happens if it lapses?

Idaho Code § 54-5215(2)(a) lets the Idaho Contractors Board reprimand, suspend or revoke a registration, or impose a civil penalty, after an opportunity for a hearing, where a contractor has violated the chapter, “including, but not limited to, failure to keep current or provide insurance coverage as required by this chapter”. Under § 54-5211(2), an inactive registrant “may not engage in business as a contractor in this state and does not need to keep current insurance coverage”, and returning to active status requires the fee board rule defines and “proof of current insurance coverage as required by this chapter.”

This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.

Get a quote for your Idaho insulation work

Name your home state, the insulation your Idaho crews install, how many field employees you carry and the coverage you want to discuss, and an Idaho quote starts there.

Get a Quote Call 317-942-0549