Start a spray foam insulation company in a set order: form and register the business, train the applicators, choose the rig, find the state credential, write the respirator and chemical programs, put the insurance set in place, and finish a business plan a lender can read. The state credential and the insurance both come before the first bid: in Nevada, for one example, a contractor must be licensed before bidding or negotiating a price, and EPA’s guidance tells homeowners choosing a spray foam contractor to verify the contractor’s insurance and licenses.
Set up the business before you buy foam
Settle the legal form of the company first, because the filings that follow depend on it. The U.S. Small Business Administration says “You’ll need to choose a business structure before you register your business with the state.” It adds that “Most businesses will also need to get a tax ID number and file for the appropriate licenses and permits.”
The choice of structure matters for a contractor whose work can end in a claim. The SBA says a sole proprietorship’s “business assets and liabilities are not separate from your personal assets and liabilities.” It says a limited liability company or corporation status “can protect your personal property from lawsuits. However, that protection has limits.”, and it follows with “Business insurance can fill in any gaps in coverage.”
Get the federal tax ID once the company is registered. The SBA says of the Employer Identification Number: “You need it to pay federal taxes, hire employees, open a bank account, and apply for business licenses and permits.” It also says “It’s free to apply for an EIN, and you should do it right after you register your business.” The business account comes next, since “You can open a business bank account once you’ve gotten your federal EIN.”
What all of this costs is the subject of our startup cost guide. An owner who will blow cellulose or lay fiberglass rather than spray foam should turn to our insulation start-up guide instead.
Get the applicators trained
Train the crew before any job starts, because the federal guidance treats training as part of spraying foam safely. EPA’s archived guidance on safer workplace practices tells applicators and helpers to “Receive hands-on classroom training on the safe use of SPF offered by the Spray Polyurethane Foam Alliance Accreditation Program”, and adds that “SPF system houses also offer classroom and hands-on instruction on the safe use of SPF.” EPA also sets out what the crew should know before a job begins: “Make sure all applicators and helpers understand ahead of time how to safely handle chemicals, the dangers of exposure, factors that affect curing, and have the appropriate protective equipment on hand.”
Expect a homeowner to raise it. EPA’s archived guidance tells homeowners to “Ensure your contractor has received appropriate training.” EPA’s contractor and client checklist, which it calls “not a regulatory compliance tool”, lists “Training and certification credentials of the project manager, installers, and assistants.” among the topics to go over with a client. How to pick a program, and what a certificate does and does not change, is covered in our applicator certification guide.
What the rig does, and how it is insured
Pick the rig knowing what it does on a job and how it will be insured. EPA’s archived product-types page for spray foam describes the high-pressure system this way: “Sides A and B are pumped through heated hoses from supply tanks into a nozzle where the two components react”. The same page tells applicators to “Ensure all equipment is intact upon use and ensure proper equipment maintenance.”
What to check on the title, the proportioner, the generator and the trailer, whatever the way you acquire the rig, is the subject of our rig buying guide.
For insurance, ask how the truck and its equipment are each insured. The NAIC’s small business page says “If your business owns or leases a vehicle, make sure its name is listed on the policy as the principal insured.” It also suggests you “Consider increasing insurance on your business vehicle to cover permanently attached items such as a generator or storage unit.” The California Department of Insurance describes inland marine as “a specialized type of property insurance that primarily covers damage to or destruction of your business property while in transport.” Our commercial auto and inland marine pages read those policies for a spray rig.
Find the state credential that reaches spray foam work
Look up the state credential before you bid anything, because in a state like Nevada the license has to come before contracting or bidding, unless a statutory exemption applies. The Nevada State Contractors Board says “All contractors must be licensed prior to contracting (bidding, offering to engage, or negotiating a price).” Nevada’s regulations also name the material: “The Board will grant to qualified applicants a license in the specialty of installing and applying polyurethane or other similar products and coatings, whether in spray or rigid form, for the thermal insulation of structures”.
That specialty is not the whole Nevada picture. Nevada names insulation in more classifications than this specialty, as the Nevada page shows, and none of the Nevada sources behind it says which classification a spray foam job needs.
Elsewhere the answer takes a different shape; the SBA says “Industry requirements often vary by state.” Our license guide sorts the states we write for by the kind of rule each has, with a link to each state’s page.
Write the respirator and chemical program
Put the safety programs in writing before any foam is sprayed: OSHA’s standards put the duty to write them on the employer, the respirator program wherever respirators are necessary or required, and the hazard communication program at each workplace. Under OSHA’s respiratory protection standard, “In any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer, the employer shall establish and implement a written respiratory protection program with worksite-specific procedures.” Before an employee is fit tested or required to use a respirator, that standard adds, “The employer shall provide a medical evaluation to determine the employee’s ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace.” OSHA’s hazard communication standard says “Employers shall develop, implement, and maintain at each workplace, a written hazard communication program”. EPA’s product page says what is in the foam: “Side A contains very reactive chemicals known as isocyanates.” Those OSHA standards are general ones, and our isocyanate exposure control plan takes up the isocyanate side, with the OSHA, NIOSH and EPA sources for each part.
Put the insurance set in place before you bid
Have the policies bound before any bid goes out, since EPA’s archived guidance tells homeowners choosing a spray foam contractor to “Verify the contractor’s insurance and licenses.” The SBA adds “Some states also require additional insurance. Laws requiring insurance vary by state.” For a spray foam company, line up liability coverage first, then workers’ compensation for the crew, auto coverage for the trucks and equipment coverage for the rig, and read the pollution wording in each.
The SBA says general liability insurance “protects against financial loss as the result of bodily injury, property damage, medical expenses, libel, slander, defending lawsuits, and settlement bonds or judgments.” The California Department of Insurance cautions that “There are major exclusions under a CGL policy so it is always important to read and understand all coverage exclusion.” For how that form meets insulation jobs, see our general liability coverage explainer.
For spray foam, pollution is the exclusion to understand before you bind. The sample commercial general liability coverage form a California county posts defines pollutants as “any solid, liquid, gaseous or thermal irritant or contaminant, including smoke, vapor, soot, fumes, acids, alkalis, chemicals and waste.” Its pollution exclusion reaches injury or damage “arising out of the actual, alleged or threatened discharge, dispersal, seepage, migration, release or escape of” pollutants in the cases the form spells out, and its job-site part carries exceptions that open “However, this subparagraph does not apply to:”. Our spray foam insurance page reads that language in each policy form it cites, and the wording of your own policy is what settles a claim.
Workers’ compensation is a state matter. The U.S. Department of Labor says “Individuals injured on the job while employed by private companies or state and local government agencies should contact their state workers’ compensation board.” The NAIC says “Nearly all U.S. states require employers to purchase a workers’ compensation insurance policy to cover employees.” and advises “Check with your state insurance department to understand what is required for your specific business type.” How the policy applies to an insulation crew is set out in our workers’ compensation explainer.
For the trucks that tow the rig, the NAIC warns “If you rely on personal auto or liability insurance to vehicles used for business, look closely at the provisions as business-related liability may be excluded.” To see these policies side by side, read our insulation business insurance program page.
The business plan sections the SBA lists
Write the plan as the earlier steps come together, and finish it before you ask for a loan. Of the traditional format, the SBA’s planning guide says “Lenders and investors commonly request this plan.”, and of the shorter lean format, “Some lenders and investors may ask for more information.” Its loan guidance adds “To increase your chances of securing a loan, you should have a business plan, expense sheet, and financial projections for the next five years.”
The SBA lists these as common sections of a traditional plan, and says “you don’t have to stick to the exact business plan outline.” Here is what it says to put in each, and where a spray foam company’s own steps fit:
- Executive summary. The SBA says “You should also include financial information and high-level growth plans if you plan to ask for financing.”
- Company description. “Explain the competitive advantages that will make your business a success. Are there experts on your team?” Trained and certified applicators belong here.
- Market analysis. “You’ll need a good understanding of your industry outlook and target market.” Name the builders, homeowners or commercial owners you plan to serve.
- Organization and management. “Describe the legal structure of your business.” That is the structure chosen at the start. The SBA also suggests you “Consider including resumes and CVs of key members of your team.”
- Service or product line. “Describe what you sell or what service you offer.” Say which you will spray, open-cell foam, closed-cell foam or each of them, and on which kinds of buildings.
- Marketing and sales. “Your goal in this section is to describe how you’ll attract and retain customers.”
- Funding request. “Specify if you need funds to buy equipment or materials, pay salaries, or cover specific bills until revenue increases.” The rig, the material and the crew’s early payroll go here.
- Financial projections. “For the first year, be even more specific and use quarterly — or even monthly — projections.” The SBA adds “Make sure to clearly explain your projections, and match them to your funding requests.”
Real-World Scenario: A closed-cell applicator who has sprayed for another contractor decides to open his own company. He forms an LLC, gets the tax ID and opens the business account before he looks at rigs. He finds a used trailer rig, and before paying for it he asks how the trailer, the truck that tows it and the equipment inside would each be insured. He reads his state’s page, learns the license comes before any bid, and puts the respirator program, the medical evaluations and the insurance into his funding request.
The insurance set belongs in the plan as well. The SBA notes that “knowing your NAICS code could help you with market analysis, insurance, and taxes.”, and the California Department of Insurance tells owners “It is ultimately your responsibility to make an informed decision and choose the insurance that best fits your business plan.” Once you have the plan, the SBA says “Once you have your materials ready, contact banks and credit unions to request a loan.”
The paperwork to keep once the company opens
Keep the paperwork from every step together: the entity filings, the tax ID, the state credential and its renewal date, the training cards, the written programs and medical evaluations, and the policies. EPA’s checklist notes that “contractors certified by the Spray Polyurethane Foam Association (SPFA) Professional Certification Program carry wallet-sized cards to verify that they have passed testing and certification requirements.”
New hires add to that file. Under the hazard communication rule, “Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment”, so a new crew member’s training for the work area belongs in it from the time of that first assignment. To have the insurance set priced, send us the rig, the crew and your service area through the quote form.