Owner Resources

Isocyanate Exposure Control Plan for Foam Insulation Crews

An applicator in a blue coverall, goggles and respirator spraying foam insulation onto a framed wall

An isocyanate exposure control plan is the written program a spray foam employer keeps for the chemicals its crews spray: it assesses exposure, puts engineering controls ahead of respirators, runs a respirator program with medical evaluations, and trains the crew. The binding duties come from OSHA’s standards; NIOSH and EPA supply the spray foam practice around them.

What a written isocyanate program covers

The plan is a working document built from rules and guidance that carry different weight, so it helps to know why the chemistry earns a program of its own. EPA’s archived page on programs related to spray foam says spray foam “contains methylene diphenyl diisocyanate (monomeric MDI) and MDI-based polyisocyanates called polymeric MDI (pMDI).” NIOSH’s archived isocyanates page says “Isocyanates can also sensitize workers, making them subject to severe asthma attacks if they are exposed again.”

NIOSH ties the whole program together in its alert on spray-on truck bed liner and related applications: “These procedures and controls—together with respirator use, a written respiratory protection program, and ongoing worker training—will reduce the risk for worker exposures during the spray-on process.” That alert was written for truck bed liners, and it reaches insulation work through EPA, whose archived workplace page says “NIOSH considers SPF insulation application to have similar hazards to other spray polyurethane applications with it calling for the same safety procedures and personal protective equipment as detailed in the 2006 NIOSH Alert”.

Respirator types, gloves and suits are covered in our spray foam PPE guide, so this guide stays with the program around the gear.

Whose rule is it: standards, the Act and an emphasis program

The duties in this plan belong to the employer. The Occupational Safety and Health Act says each employer “shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees;” and “shall comply with occupational safety and health standards promulgated under this chapter.”

For a foam crew, the respirator and hazard communication standards reach construction work by cross-reference. OSHA’s construction rule on respiratory protection says “The requirements applicable to construction work under this section are identical to those set forth at 29 CFR 1910.134 of this chapter.” Its construction rule on hazard communication says “The requirements applicable to construction work under this section are identical to those set forth at § 1910.1200 of this chapter.”

The isocyanates emphasis program is a different kind of thing. EPA’s archived workplace practices page says “Effective June 20, 2013, OSHA implemented a National Emphasis Program (NEP) CPL 03-00-017” “to identify and reduce or eliminate the incidence of adverse health effects associated with occupational exposure to isocyanates”. An emphasis program shapes where OSHA looks; the duties your plan answers come from the Act and the standards quoted here. EPA’s own contractor checklist is guidance, and it says so: “This checklist was prepared as a voluntary aid to protect against potential risks from SPF; it is not a regulatory compliance tool. However, some of the best practices included in the checklist may be required under local, state or federal worker protection or other regulations.”

Exposure assessment before anyone picks a control

The plan starts with what the crew actually breathes. OSHA’s respiratory protection standard says “The employer shall identify and evaluate the respiratory hazard(s) in the workplace; this evaluation shall include a reasonable estimate of employee exposures to respiratory hazard(s) and an identification of the contaminant’s chemical state and physical form.” The standard also covers the case where no estimate can be made: “Where the employer cannot identify or reasonably estimate the employee exposure, the employer shall consider the atmosphere to be IDLH.” In the standard’s shorthand, that means immediately dangerous to life or health.

EPA explains why the estimate changes from job to job. Its archived spray foam page says “The potential for exposure varies due to the amount of product used, the delivery mechanism, and overall application process.” Its archived exposures page says “Research data indicate that inhalation exposures during SPF insulation will typically exceed Occupational Safety and Health Administration (OSHA) occupational exposure limits (OELs) and require skin, eye and respiratory protection.” EPA’s contractor checklist puts the habit at the front of each job: “Conduct a pre-job assessment so that health and safety risks can be identified and managed.”

For measurement, NIOSH’s alert on spray-on truck bed liner and related applications tells a shop owner to “conduct an exposure assessment for airborne MDI at the onset of business and any time a major change (structural or ventilation) is made to the spray enclosure.” It says “Ensure that spray gun users and the areas adjacent to the spray enclosures are sampled.” and “Use the appropriate sampling methods, as described in the NIOSH and OSHA analytical methods”. Results need a yardstick. EPA’s archived programs page says “OSHA regulates workplace exposures of MDI. The enforceable permissible exposure limit for MDI is 0.2 mg/m3 as a ceiling limit (0.02 parts per million).” It also gives NIOSH’s recommended limit and warns “However, the NIOSH REL is not intended to prevent health effects in workers who are already sensitized.” The checklist also allows monitoring after the spray stops: it says “Air quality testing/monitoring for workers may also be used to determine safe re-entry times.”

Controls in the order the respirator standard sets

Engineering controls come ahead of respirators under the respirator standard itself. It opens: “In the control of those occupational diseases caused by breathing air contaminated with harmful dusts, fogs, fumes, mists, gases, smokes, sprays, or vapors, the primary objective shall be to prevent atmospheric contamination.” It continues: “This shall be accomplished as far as feasible by accepted engineering control measures (for example, enclosure or confinement of the operation, general and local ventilation, and substitution of less toxic materials). When effective engineering controls are not feasible, or while they are being instituted, appropriate respirators shall be used pursuant to this section.”

On a foam job, EPA’s archived guidance starts with isolation and airflow. Its archived workplace page says “Isolate the work site to prevent isocyanates and other chemical vapors from spreading to other rooms or floors.” Its archived exposures page warns “Vapors and aerosols can migrate through the building if the area is not isolated and properly ventilated.” The checklist says “Implement ventilation strategies to ventilate the spray zone uniformly, reduce exposures, and prevent migration of chemical contaminants.”

Who stands in the work zone is a control as well. The checklist says “Only protected workers should be present during application, foam curing, and cleanup.” EPA’s contractor checklist adds “Vacate other trade workers from the work zone during application, foam curing, trimming, and cleanup.” The airflow setups and the gear that go with these controls are laid out in the PPE guide.

Real-World Scenario: A spray foam contractor adds a closed-cell product from a new supplier and starts bidding crawl space jobs, where the crew has not sprayed before. Before the crawl space work begins, she reads the new product’s safety data sheet with her crew lead, updates the plan’s exposure assessment and ventilation setup for tight spaces, schedules a newly hired helper’s medical evaluation and training, and adds the new sheet to the binder in the truck.

Where the respirator program sits in the larger plan

The respirator program is a written plan inside the plan. Under the respirator standard, “In any workplace where respirators are necessary to protect the health of the employee or whenever respirators are required by the employer”, “the employer shall establish and implement a written respiratory protection program with worksite-specific procedures.” The standard’s list of provisions, as applicable, includes procedures for selecting respirators, medical evaluations of employees required to use them, fit testing procedures for tight-fitting respirators, and “Procedures for regularly evaluating the effectiveness of the program.”

The program needs an owner. The standard says “The employer shall designate a program administrator who is qualified by appropriate training or experience that is commensurate with the complexity of the program to administer or oversee the respiratory protection program and conduct the required evaluations of program effectiveness.” The selection rules, fit tests and seal checks are detailed in our spray foam PPE guide.

Medical surveillance beyond the respirator clearance

The medical step the respirator standard makes binding is the evaluation. The standard says “The employer shall provide a medical evaluation to determine the employee’s ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace.” Isocyanate guidance asks for more than a clearance. EPA’s archived workplace page tells crews to “Receive medical surveillance to ensure applicators and helpers are healthy enough to wear a respirator.” EPA’s archived health concerns page says “Manufacturers recommend in their isocyanate safety data sheets that individuals undergo medical surveillance prior to working with these materials”. In the truck bed liner alert, NIOSH recommends a baseline: “Conduct preplacement examinations to obtain baseline health status.” It adds “Include all potentially exposed workers for the early detection and prevention of the acute and chronic effects of exposure to isocyanates.”

Surveillance also means acting on symptoms. NIOSH says “Workers potentially exposed to isocyanates who experience persistent or recurring eye irritation, nasal congestion, dry or sore throat, cold-like symptoms, cough, shortness of breath, wheezing, or chest tightness should see a physician knowledgeable in work-related health problems.” EPA’s archived health page warns “Symptoms may also be delayed up to several hours after exposure.”

Training the crew and keeping safety data sheets within reach

Training under the hazard communication standard is tied to the assignment, not the calendar. The standard says “Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area.” Respirator training runs on its own clock; the respirator standard says it “must be comprehensive, understandable, and recur annually, and more often if necessary.”

Construction adds a general duty to instruct. OSHA’s construction training rule says “The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.” EPA’s archived workplace page says “Training should include protection of applicators, and any potentially exposed workers, including other workers at the job site or workers re-entering the job site.” Outside courses are a separate matter, covered in our spray foam applicator certification guide, and the hazards to name when you hire are in our insulation installer job description.

The written side of hazard communication is kept at each workplace. The standard says “Employers shall develop, implement, and maintain at each workplace, a written hazard communication program”, including “A list of the hazardous chemicals known to be present using a product identifier that is referenced on the appropriate safety data sheet”. The same standard has the employer “shall maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and shall ensure that they are readily accessible during each work shift to employees when they are in their work area(s).” EPA’s checklist says “A written hazard communication program should be in place for the worksite and included in the binder.”

Reviewing the plan, and the policies behind the crew

A plan that sits in a drawer goes stale. The respirator standard says “The program shall be updated as necessary to reflect those changes in workplace conditions that affect respirator use.” Its list of provisions ends with procedures for evaluating the program’s effectiveness, which is the administrator’s job. Under the standard, a change in workplace conditions that affects respirator use is the trigger for updating the program, and the administrator’s evaluations of the program’s effectiveness show where it has gone stale.

EPA’s archived workplace page puts questions for the contractor to building owners: “Ensure your contractor has received appropriate training.” and “Verify the contractor’s insurance and licenses.” The licensing half of that sentence is in the license guide. For the insurance half, the workers’ compensation and general liability pages explain what each policy is for, and the page on spray foam insurance covers the lines a foam contractor buys. Questions about the policies themselves can go to a licensed agent through the quote request; the plan is yours to write and keep.

How an isocyanate exposure control plan moves from measuring the exposure to reviewing the program

A flow of the plan’s parts, from measuring the exposure to reviewing the program. Assess what the crew breathes on each job. Put engineering controls in place before respirators: isolate, ventilate and keep unprotected people out. Run a written respirator program with a qualified administrator. Clear each wearer medically and watch for signs of sensitization. Train the crew and keep safety data sheets within reach. Update the respirator program when workplace conditions that affect respirator use change, and assess the exposure again. No figures are shown.

Frequently asked questions

Isocyanate exposure control plan: what should a spray foam employer put in it?

Start with the parts the federal rules require. OSHA’s respiratory protection standard has the employer “identify and evaluate the respiratory hazard(s) in the workplace”, prefer engineering controls “as far as feasible”, and, where respirators are needed, run a written program that includes medical evaluations and fit testing. OSHA’s hazard communication standard adds a written program and worker training. NIOSH and EPA guidance supplies the spray foam detail, such as isolating the work site and medical surveillance for applicators and helpers.

Isocyanate exposure limits: what applies to the MDI in spray foam?

EPA’s archived page on spray foam programs states OSHA’s limit: “The enforceable permissible exposure limit for MDI is 0.2 mg/m3 as a ceiling limit (0.02 parts per million).” The same page gives NIOSH’s recommended limit and adds “However, the NIOSH REL is not intended to prevent health effects in workers who are already sensitized.” EPA’s archived exposures page says “Research data indicate that inhalation exposures during SPF insulation will typically exceed” OSHA’s limits “and require skin, eye and respiratory protection.” A limit is not a program.

Isocyanate exposure monitoring: how is a crew’s exposure measured?

By air sampling with the methods NIOSH and OSHA describe. In its alert on spray-on truck bed liner and related applications, which EPA’s archived workplace page says NIOSH applies to spray foam insulation, NIOSH says “Ensure that spray gun users and the areas adjacent to the spray enclosures are sampled.” and “Use the appropriate sampling methods, as described in the NIOSH and OSHA analytical methods”. OSHA’s respirator standard requires “a reasonable estimate of employee exposures”, and where the employer cannot make that estimate, it must treat the air as immediately dangerous to life or health.

Isocyanate exposure testing for workers: what medical checks apply?

OSHA’s respirator standard requires a medical evaluation “to determine the employee’s ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace.” That is the binding check for anyone who must wear one. NIOSH’s truck bed liner alert goes further as a recommendation: “Conduct preplacement examinations to obtain baseline health status.” EPA’s archived health page says manufacturers’ safety data sheets recommend “that individuals undergo medical surveillance prior to working with these materials”.

Isocyanate exposure symptoms: what should send a worker to a doctor?

NIOSH lists them: “Workers potentially exposed to isocyanates who experience persistent or recurring eye irritation, nasal congestion, dry or sore throat, cold-like symptoms, cough, shortness of breath, wheezing, or chest tightness should see a physician knowledgeable in work-related health problems.” EPA’s archived health page warns that “Symptoms may also be delayed up to several hours after exposure.” and that “There is no recognized safe level of exposure to isocyanates for sensitized individuals.”

Isocyanate exposure and OSHA’s emphasis program: is it a rule my crew must follow?

No. The emphasis program, as EPA’s archived page describes it, steers OSHA’s attention, and the duties come from the law and the standards. EPA’s archived page says OSHA’s program aims “to identify and reduce or eliminate the incidence of adverse health effects associated with occupational exposure to isocyanates”. Indiana’s Department of Labor describes emphasis programs as “temporary programs that direct federal OSHA resources toward specific hazards”. The Occupational Safety and Health Act has each employer comply with OSHA’s standards, including the respirator standard construction work follows.