States we serve
Alabama Insulation Contractor Insurance
The Alabama Licensing Board for General Contractors lists “Insulation” as a specialty for the commercial and industrial work it licenses, and Code of Ala. § 34-8-7(a)(2) exempts the construction or repair of a residence or private dwelling from that chapter. The Alabama Department of Labor says workers’ compensation coverage is required by law, and the § 25-5-50(a) small-employer exclusion does not reach the business of constructing or assisting on-site in the construction of new single-family, detached residential dwellings.
An insulation contractor in Alabama reads rules from the Licensing Board for General Contractors, the Home Builders Licensure Board and a workers’ compensation law whose small-employer exclusion carries a construction exception. The Alabama Licensing Board for General Contractors says “The Board licenses and regulates commercial/industrial contractors in the major and specialty classifications that constitute the industry.” Code of Ala. § 34-8-7(a)(2) exempts from that Board’s chapter “The construction or repair of any residence or private dwelling or any residential swimming pool.” The Home Builders Licensure Board says “The law provides for the licensure of persons engaged in residential construction in the State of Alabama.” On payroll, the Alabama Department of Labor says of workers’ compensation coverage: “It is required by law.”
“Insulation” in the General Contractors Board’s specialty list and the § 34-8-1(a) cost of the undertaking
Under Code of Ala. § 34-8-1(a), a general contractor is one who, for a fixed price, commission, fee, or wage, undertakes to construct or superintend the construction, alteration, maintenance, repair, rehabilitation, remediation, reclamation, or demolition of a building, structure or other improvement in the State of Alabama “where the cost of the undertaking is one hundred thousand dollars ($100,000) or more”. Section 34-8-1(c) reaches a subcontractor doing that work “where the cost of the undertaking is one hundred thousand dollars ($100,000) or more under contract to a general contractor, as defined in subsection (a), or another subcontractor.”
The Board’s rule on classifications prints a Building Construction specialty list that includes a moisture-protection group, printed “MOISTURE PROTECTON”, whose entries include “Insulation” and “Exterior Insulation and Finish Systems”.
That specialty sits inside a commercial license. The Board’s prime application instructions say “All work referenced must be commercial/industrial work completed in prior years in the classification(s) requested within this application.” The § 34-8-7(a)(2) exemption takes “The construction or repair of any residence or private dwelling” outside the chapter. For a subcontractor, § 34-8-7(b)(5) says “A subcontractor is not required to be licensed at the time a project is bid, but must be licensed with the board prior to beginning work on the project.” The Board’s subcontractor instructions add: “As a subcontractor, you may not contract directly with a property owner.”
The Home Builders Licensure Board’s § 34-14A-2(16) definition and the license kinds its rule prints
Under Code of Ala. § 34-14A-2(16), a residential home builder includes a person who undertakes, for a price or fee, the construction “of any residence or structure that is not over three floors in height and that does not have more than four residential units”, “or the repair, improvement, or reimprovement thereof, to be used by another as a residence when the cost of the undertaking exceeds ten thousand dollars ($10,000).” Code of Ala. § 34-14A-5 says “(a) (1) All residential home builders shall be required to be licensed by the Home Builders Licensure Board annually.”
The Board’s rule on license kinds says “(a) Licenses may be issued without limitation, with limitation, or with limitation specifying a single trade.” A holder of a license with limitation may engage in residential home building only “when the scope of the construction is limited to the repair, improvement, or reimprovement, as such term is defined herein, of a residence or structure”, and only where the work is not residential roofing. The Board’s sample wallet card for that license reads “Holder is Hereby Granted a LIMITED LICENSE as a SINGLE TRADE NON-STRUCTURAL Residential Home Builder/Remodeler”. As the Board’s rule and its sample cards print them, its license types name no insulation category.
The Board’s exemptions page says “Subcontractors who are employed by a licensee are not required to hold a residential home builders license.”
The prime application’s liability certificate and the § 34-14A-19 disclosure to a homeowner
The Licensing Board for General Contractors’ prime application instructions say “Proof of current liability insurance must be submitted along with this application”, with the Alabama Licensing Board for General Contractors listed as certificate holder. The coverage line that certificate points to is general liability.
On the residential side, Code of Ala. § 34-14A-19 says “Prior to the commencement of residential home building by a residential home builder, the residential home builder shall disclose in writing to the homeowner whether the residential home builder has obtained and is currently maintaining liability insurance.”
Section 25-5-50(a): the small-employer clause and its new single-family, detached dwelling exception
Code of Ala. § 25-5-50(a) reads “This article and Article 2 of this chapter shall not be construed or held to apply to an employer of a domestic employee”, and the employers it then lists include “an employer who regularly employs less than five employees in any one business, other than the business of constructing or assisting on-site in the construction of new single-family, detached residential dwellings”. The Alabama Department of Labor’s insurance-requirement page counts employees “full-time or part-time and including officers of a corporation in any one business”.
Corporate officers and LLC members are addressed in subsection (b), which reads “(b) Notwithstanding subsection (a), an officer of a corporation or individual limited liability company member may elect to be exempt from coverage by filing written certification of the election with the employer’s insurance carrier.” The subsection adds that “the election shall not relieve the employer from continuing coverage for all other eligible employees who may have been covered prior to the election or who may subsequently be employed by the employer.” The coverage line these subsections bear on is workers’ compensation.
An approved carrier, a group self-insurance fund or the NCCI-administered Assigned Risk Pool
The Department’s page says “The manner or method by which you choose to insure your workers’ compensation liability is your decision.” The routes it lists include “Purchase insurance from an approved commercial workers’ compensation carrier”, “Provide coverage through a group self-insurance fund” and “Individually self-insure, if qualified.”
For an employer insurers decline, the page describes the Assigned Risk Pool, “Administered by the National Council on Compensation Insurance (NCCI)”, and says the employer must be refused by the number of insurance carriers it states and apply “through your insurance agent providing proof that the insurance carriers turned you down.”
The Alabama Residential Energy Code, the commercial “Either” rule and § 34-14A-12 local enforcement
The residential energy rule in the Alabama Administrative Code reads “305-2-4-.10 Residential Energy Code. The 2015 International Energy Conservation Code (IECC) as modified below.” For commercial buildings, the companion rule reads “(1) Either the 2015 International Energy Conservation Code or the ANSI/ASHRAE/IES Standard 90.1-2013 shall be implemented and enforced for commercial buildings.” The commercial choice is therefore the 2015 International Energy Conservation Code or the ANSI/ASHRAE/IES Standard 90.1-2013.
The U.S. Department of Energy’s Building Energy Codes Program lists “Current State Code 2015 IECC ASHRAE 90.1-2013” and “Enforcement Mandatory Statewide Mandatory Statewide”; its table shows the standard in the commercial column, while the state rule’s “Either” leaves the code edition open to commercial buildings too. Code of Ala. § 34-14A-12 says “The Alabama Residential Energy Code shall be enforced by local jurisdictions that have adopted energy code provisions for residential and commercial construction and improvements.”
A builder duty is written to start later. Code of Ala. § 34-14A-12.1 reads “Beginning January 1, 2027, a residential home builder within this state who constructs, renovates, or repairs a residence or structure shall do so in accordance with applicable residential building code adopted pursuant to Section 34-14A-12 or, if applicable, the local jurisdiction’s residential building code.”
Loose-fill baffles at the attic access, roof-deck insulation and fastened crawl space walls
The residential rule says “A wood framed or equivalent baffle or retainer is required to be provided when loose fill insulation is installed, the purpose of which is to prevent the loose fill insulation from spilling into the living space when the attic access is opened”. That sentence reads directly on crews blowing loose fill into an Alabama attic.
For semi-conditioned attics, the rule deems “an air impermeable insulation installed to the roof deck” at the value it states equivalent to the code’s ceiling provisions. The rule names no product type for that insulation, whether a spray foam crew or another installer puts it on the deck. The rule permits crawl space walls to be insulated “when the crawl space is not vented to the outside”, and says “Crawl space wall insulation shall be permanently fastened to the wall”.
“MA** | AL | MO” on OSHA’s State Plans page, Side A isocyanates and EPA’s SPF checklist
OSHA’s State Plans page says State Plans “are OSHA-approved workplace safety and health programs operated by individual states or U.S. territories”, its list shows Alabama with no State Plan mark (“MA** | AL | MO”), and OSHA says “The OSH Act covers most private sector employers and their workers”.
For a spray polyurethane foam crew on an Alabama job, the Consumer Product Safety Commission’s spray-foam fact sheet says the products it describes “contain isocyanates in Side A”, and that “Contractors should use safe work practices to reduce or prevent exposures to homeowners at every stage of SPF installation.” EPA’s contractor-client checklist for professionally installed spray foam says it “was prepared as a voluntary aid to protect against potential risks from SPF; it is not a regulatory compliance tool”.
Older attic fill raises its own question. EPA tells homeowners “If you have vermiculite insulation in your home, you should assume this material may be contaminated with asbestos”, and to look at the insulation “without disturbing it.”
Huntsville’s certificate on file, Mobile’s “Contractor” license type and Hoover’s “Insulating and weather stripping” class
Each card below repeats what its own city office states, in that office’s words.
Huntsville
Huntsville’s license classification page says “All contractors and subcontractors doing business in Huntsville must have a current privilege license, per Ordinance 93-725, and contractors liability insurance before proceeding with construction.” The city says “All contractors must show proof of holding a Certificate of Insurance naming the City of Huntsville as the certificate holder”, and under its ordinance text that certificate “shall be filed with the City of Huntsville Inspection Department and shall remain on file”.
Tuscaloosa
The City of Tuscaloosa says that for residential permits “A city general contractor’s license number is required on all applications unless the contractor qualifies for an exception”. On commercial permits, “Sub-contractors will have to meet the same license requirements as the general contractor in addition to any specialty license such as electrical, plumbing, gas, mechanical etc.”
Auburn
The City of Auburn’s Revenue Office says “Contractors licensed by a state of Alabama licensure board (e.g. plumbers, electricians, homebuilders) must present proof of their State of Alabama licensure board license when applying for a business license in the City of Auburn.” Its indemnity bond or cash deposit rule names “General contractors, plumbers, and electricians” only.
Dothan
Dothan’s Permits and Inspections office says “A permit may be obtained by the property owner through owner’s privilege if they are doing the work themselves; otherwise, it must be obtained by a contractor licensed to work in the City of Dothan.” Its commercial permit guide says “Every Contractor or Sub Contractor MUST HAVE a City of Dothan BUSINESS LICENSE.” Dothan’s energy inspection guide adds that at the final inspection “you will be required to submit a successful blower door test”.
Hoover
The City of Hoover’s license schedule, part of its Code of Ordinances, lists “Insulating and weather stripping” among its contractor license classes, a city business license rather than a state credential. The schedule also says: “No license will be issued unless an applicant has obtained all state permits or certifications.”
Madison
The City of Madison’s Building Department says “Any person who does any type of construction in the City of Madison for profit is required to obtain a business license prior to doing work and, if necessary, obtain a permit.” Its Inspections page says “New one and two family homes located in the City of Madison are required to demonstrate compliance with the residential energy efficiency provisions” of the code it names “by third party verification.”
Mobile
The City of Mobile’s Business License Overview says “A business license is required for any person, firm or entity conducting business from, into or within the City of Mobile and the Police Jurisdiction.” For the business license type it calls “Contractor”, the City’s page lists the requirement “You must have an Alabama Home Builders License and a Surety Bond.”
The Division of Construction Management’s State Building Code on state-funded, school, hotel and theater work
The Division of Construction Management’s State Building Code page says “The State Building Code is limited to any new construction, addition, renovation, modification of mechanical, electrical, plumbing systems, sitework and generally any and all work on state-owned property and/or using state funds, on all public and private kindergarten through twelfth grade (K-12) schools, on public postsecondary schools, on hotels/motels and on movie theaters.”
Read by policy, the § 25-5-50 clauses and the Department of Labor’s routes belong with workers’ compensation; the Board’s prime-application certificate, the § 34-14A-19 disclosure and Huntsville’s certificate of insurance belong with general liability. The site’s other lines include commercial auto and inland marine for tools and equipment. The program as a whole starts at the insulation contractor insurance page, with spray foam coverage and fiberglass installer coverage each on a page of its own.
Through Wexford Insurance, LLC, an independent insurance agency, Insulation Contractor Insurance places coverage for insulation contractors. Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor. Your number of field employees, what you install, the state you are based in and the coverage you want to talk about are what the quote form asks.
Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.
- Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.
A chart of what Alabama requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: A state license or registration names insulation work; this page sets out the reach of each state rule. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The International Energy Conservation Code, statewide, for residential and commercial buildings. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market; the law sets a threshold for which employers it covers. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.
Nearby states we also insure
Alabama coverage, services and state offices
What we insure
Coverage lines
Alabama insulation contractor insurance questions
Alabama contractor license requirements: which board lists insulation for commercial work?
The Alabama Licensing Board for General Contractors says “The Board licenses and regulates commercial/industrial contractors in the major and specialty classifications that constitute the industry.” Its specialty list prints “Insulation” in a moisture-protection group. Code of Ala. § 34-8-1(a) defines a general contractor by undertakings “where the cost of the undertaking is one hundred thousand dollars ($100,000) or more”, and § 34-8-7(a)(2) exempts from that chapter “The construction or repair of any residence or private dwelling or any residential swimming pool.”
Alabama home improvement license: what do the Home Builders Licensure Board’s license types print?
Under Code of Ala. § 34-14A-2(16), the Home Builders Licensure Board’s definition of a residential home builder reaches a person who undertakes, for a price or fee, the construction “of any residence or structure that is not over three floors in height and that does not have more than four residential units”, “or the repair, improvement, or reimprovement thereof, to be used by another as a residence when the cost of the undertaking exceeds ten thousand dollars ($10,000).” As the Board’s rule on license kinds and its sample wallet cards print them, its license types name no insulation category.
Is workers comp required in Alabama under Code of Ala. § 25-5-50(a)?
Code of Ala. § 25-5-50(a) reads “This article and Article 2 of this chapter shall not be construed or held to apply to an employer of a domestic employee”, and the employers it then lists include “an employer who regularly employs less than five employees in any one business, other than the business of constructing or assisting on-site in the construction of new single-family, detached residential dwellings”. The Alabama Department of Labor’s insurance-requirement page puts the question and answer this way: “Why should you have workers’ compensation coverage? It is required by law.”
Alabama workers comp exemption: can a corporate officer or LLC member step outside coverage?
Code of Ala. § 25-5-50(b) reads “(b) Notwithstanding subsection (a), an officer of a corporation or individual limited liability company member may elect to be exempt from coverage by filing written certification of the election with the employer’s insurance carrier.” The same subsection adds that “the election shall not relieve the employer from continuing coverage for all other eligible employees who may have been covered prior to the election or who may subsequently be employed by the employer.” The election is made by the officer or member and filed with the employer’s insurance carrier.
Alabama energy code: which codes govern commercial buildings and who enforces the residential one?
The Alabama Administrative Code’s commercial energy rule reads “(1) Either the 2015 International Energy Conservation Code or the ANSI/ASHRAE/IES Standard 90.1-2013 shall be implemented and enforced for commercial buildings.” The Department of Energy’s Building Energy Codes Program lists “Current State Code 2015 IECC ASHRAE 90.1-2013” and “Enforcement Mandatory Statewide Mandatory Statewide”, while the state rule’s word “Either” keeps the code edition open to commercial buildings as well. For homes, Code of Ala. § 34-14A-12 says “The Alabama Residential Energy Code shall be enforced by local jurisdictions that have adopted energy code provisions for residential and commercial construction and improvements.”
Alabama residential energy code: what does it ask of an insulation installer?
The residential energy rule reads “305-2-4-.10 Residential Energy Code. The 2015 International Energy Conservation Code (IECC) as modified below.” Among its amendments, “A wood framed or equivalent baffle or retainer is required to be provided when loose fill insulation is installed”, to keep that fill from spilling into the living space when the attic access opens. As an alternative to insulating the floor above, the walls of a crawl space not vented to the outside may be insulated, and “Crawl space wall insulation shall be permanently fastened to the wall”.
Spray foam insulation Alabama: what do the federal fact sheet and checklist say?
The Consumer Product Safety Commission’s spray-foam fact sheet says the products it describes “contain isocyanates in Side A”, and that “Contractors should use safe work practices to reduce or prevent exposures to homeowners at every stage of SPF installation.” EPA’s contractor-client checklist says it “was prepared as a voluntary aid to protect against potential risks from SPF; it is not a regulatory compliance tool”. OSHA’s State Plans list shows Alabama with no State Plan mark.
General liability insurance Alabama: where do the state boards ask about it?
The Licensing Board for General Contractors’ prime application instructions say “Proof of current liability insurance must be submitted along with this application”, with the Board listed as certificate holder. Under Code of Ala. § 34-14A-19, “Prior to the commencement of residential home building by a residential home builder, the residential home builder shall disclose in writing to the homeowner whether the residential home builder has obtained and is currently maintaining liability insurance.”
This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Alabama insulation work
An Alabama insulation shop can ask for a quote by giving its home state, what it sprays or blows, its field employee headcount and the coverage it wants reviewed.