States we serve
Florida Insulation Contractor Insurance
The specialty contractor list on the Construction Industry Licensing Board’s page names no insulation category, and Florida’s contracting statute names insulation inside the sheet metal, air-conditioning and mechanical contractor scopes. Workers’ compensation is compulsory for covered employers, and § 440.10(1)(a) reaches any contractor or subcontractor engaged in public or private construction in the state.
The specialty contractor list on the Construction Industry Licensing Board’s page names no insulation category, and Florida’s contracting statute names insulation inside other trades’ scopes. On the workers’ compensation side, § 440.10(1)(a) says “Any contractor or subcontractor who engages in any public or private construction in the state shall secure and maintain compensation for his or her employees under this chapter as provided in s. 440.38.”
The Construction Industry Licensing Board’s specialty list and the insulation inside § 489.105(3)
Insulation appears in § 489.105(3) inside other contractors’ scopes. The sheet metal contractor’s scope in § 489.105(3)(d) covers “the manufacture, fabrication, assembling, handling, erection, installation, dismantling, conditioning, adjustment, insulation, alteration, repair, servicing, or design, if not prohibited by law, of ferrous or nonferrous metal work”. Under § 489.105(3)(f), the Class A air-conditioning contractor’s scope includes work on “piping, insulation of pipes, vessels and ducts, pressure and process piping, and pneumatic control piping”; the Class B scope in § 489.105(3)(g) reaches “piping and insulation of pipes, vessels, and ducts”; and the mechanical contractor’s scope in § 489.105(3)(i) lists “piping, insulation of pipes, vessels and ducts, pressure and process piping, pneumatic control piping”.
The specialty contractor list in a table on the Construction Industry Licensing Board’s page names no insulation category. The Florida Administrative Code’s page for rule 61G4-15.100, a rule of the Construction Industry Licensing Board, gives its title as “Certified Specialty Contractors”; the rule’s text is not on that page.
Section 489.113(2) certification, the voluntary category in § 489.113(6)(a) and the § 489.117 job-scope sentence
Section 489.113(2) states “A person must be certified or registered in order to engage in the business of contracting in this state.” Board-rule categories are treated apart: § 489.113(6)(a) says “a certified specialty contractor category established by board rule exists as a voluntary statewide licensing category and does not create a mandatory licensing requirement.” The same paragraph adds: “Any mandatory statewide construction contracting licensure requirement may only be established through specific statutory provision.”
Section 489.117(4)(a) reads: “A person whose job scope does not substantially correspond to either the job scope of one of the contractor categories defined in s. 489.105(3)(a)-(o), or the job scope of one of the certified specialty contractor categories established by board rule, is not required to register with the board.”
The Department of Business and Professional Regulation’s page says, “The Construction Industry Licensing Board is responsible for licensing and regulating the construction industry.” How these sections read on your own scope of work is a question for that Board.
The § 489.115(5) insurance affidavit and the permit power in § 489.113(4)(c)
Under § 489.115(5)(a), an applicant for a state certificate or registration, or its renewal, must submit an affidavit “attesting to the fact that the applicant has obtained workers’ compensation insurance as required by chapter 440, public liability insurance, and property damage insurance for the safety and welfare of the public, in amounts determined by rule of the board.” The public liability and property damage proof is a general liability insurance matter for an insulation business.
Except as provided in § 489.115(5)(d), § 489.114 requires a contractor “certified or registered under this part” to give the Construction Industry Licensing Board, “as a condition precedent to the issuance or renewal of a certificate or registration of the contractor,” “evidence of workers’ compensation coverage pursuant to chapter 440.” At the permit counter, § 489.113(4)(c) lets a local government deny or suspend a building permit “where a contractor fails or refuses to provide proof of public liability and property damage insurance coverage as required by s. 489.115(5) and workers’ compensation insurance coverage as required by s. 489.114.”
Section 440.02’s construction-industry limb and the § 440.10 rules between contractor and subcontractor
For private employment, including the construction industry, F.S. § 440.02(20)(b)2. reads “2. All private employments in which four or more employees are employed by the same employer or, with respect to the construction industry, all private employment in which one or more employees are employed by the same employer.” Section 440.02(10) defines “Construction industry” as “for-profit activities involving any building, clearing, filling, excavation, or substantial improvement in the size or use of any structure or the appearance of any land.” Under its construction-industry heading, the Division of Workers’ Compensation’s coverage page says “Employers with one or more employees, including the owner of the business who are corporate officers or Limited Liability Company (LLC) members, must have workers’ compensation coverage.” The Division points employers to rule 69L-6.021 for the list of trades in the construction industry.
When a contractor sublets work, § 440.10(1)(b) makes the contractor liable for compensation to the subcontractor’s employees “except to employees of a subcontractor who has secured such payment”, and § 440.10(1)(c) says “A contractor shall require a subcontractor to provide evidence of workers’ compensation insurance.” The Division of Workers’ Compensation says, “If the sub-contractor does not have workers’ compensation insurance for its employees, those workers become the employees of the contractor.” The evidence § 440.10(1)(c) asks for concerns the subcontractor’s own workers’ compensation insurance.
Section 440.103 says every employer must, “as a condition to applying for and receiving a building permit, show proof and certify to the permit issuer that it has secured compensation for its employees”, and adds: “Such proof of compensation must be evidenced by a certificate of coverage issued by the carrier, a valid exemption certificate approved by the department, or a copy of the employer’s authority to self-insure and shall be presented, electronically or physically, each time the employer applies for a building permit.”
Exemptions issued to officers and LLC members, and the certificate § 440.05 describes
The Division of Workers’ Compensation’s exemptions page says, “Exemptions are issued to officers of a corporation and members of limited liability companies - not to the business.” It adds, “Upon issuance of an exemption, the officer or member is not considered an employee of the business and may not recover workers’ compensation benefits.”
In the construction industry, § 440.02(18)(b) caps how many officers of a corporation or of any group of affiliated corporations may elect to be exempt, and requires each to be a shareholder owning at least the share of the corporation’s stock the statute sets. For a construction LLC, the Division’s construction exemptions page says the applicant must attest to a minimum ownership share of the LLC, and it limits how many officers of an LLC “or of any group of affiliated LLCs (including corporations) may elect to be exempt.”
Under § 440.05(4), a certificate of election to be exempt must state that it “is NOT a license issued by the Department of Business and Professional Regulation (DBPR).”
Section 553.901’s statewide energy code: the Florida Building Code, Energy Conservation, and the edition in development
Under § 553.901, “The Florida Building Commission shall adopt the Florida Building Code-Energy Conservation”, which the statute ties to “a statewide uniform standard for energy efficiency in the thermal design and operation of all buildings statewide”. Section 553.73(6) says an adoption or update of the Florida Building Code “is deemed adopted for use statewide without adoptions by local government”. The Florida Building Commission’s site states, “The Effective Date for the Florida Building Code, 8th Edition (2023), is December 31, 2023.” For residential and commercial buildings alike, the edition in force is the Florida Building Code, Energy Conservation, 8th Edition (2023).
For a permit applied for before a new code’s effective date, § 553.73(6) says “the state minimum building code in effect in the permitting jurisdiction on the date of the application governs the permitted work for the life of the permit and any extension granted to the permit.” So a fiberglass crew or a spray foam crew working under a permit applied for before that date stays under the code in effect in the permitting jurisdiction on the date of the application, “for the life of the permit and any extension granted to the permit.”
The Florida Building Code, Energy Conservation, 9th Edition (2026) is in development. Under § 553.73(7)(e), “A rule updating the Florida Building Code in accordance with this subsection shall take effect no sooner than 6 months after publication of the updated code.” The Commission’s code development page for the update lists “Proposed 2nd Glitch Code Changes to the 2026 FBC”.
Spray polyurethane foam exposure, occupants leaving during spraying and the unmarked “FL” on OSHA’s map
On OSHA’s State Plans page, a single asterisk marks a State Plan that covers “both private and state and local government workplaces”, and the page’s map list shows Florida as “FL” with no mark, between “DE” and “CT**”.
For a spray foam contractor, the EPA’s spray foam guidance says, “Safer work practices should be in place to avoid exposure at every stage of spray polyurethane foam (SPF) installation”, and “Building occupants and other trade workers not involved in the SPF installation should vacate the premises during installation of various types of SPF products in consultation with the contractor.”
A U.S. Consumer Product Safety Commission fact sheet on spray foam tells homeowners to “Contact your state or local consumer protection office or contractors’ licensing board if concerns are not resolved with the contractor and/or product manufacturer”; § 489.105(1) defines “Board” as “the Construction Industry Licensing Board.”
Certificate holder lines in Broward, Jacksonville, Tallahassee and Fort Lauderdale, and what Miami-Dade, Hillsborough, Orlando and Pinellas ask for
Each card below gives a county or city office’s requirements.
Miami-Dade County
Miami-Dade County’s licensing page says contractors and tradesmen working in the county “are licensed by Miami-Dade County’s Contractor Licensing Section”, under the Construction Trades Qualifying Board’s authority in accordance with Chapter 10. For a county business license, “Proof of liability insurance and worker’s compensation insurance is required after Board approval.”
Broward County
Broward County’s contractor packet asks for “proof of worker’s compensation insurance or a waiver stating exemption from Florida’s Workers Compensation law”, and says “Each certificate must list us as the certificate holder: Broward County Building Code Division”. Its journeyman application lists an “Insulation Journeyman” classification, an employee certificate inside the mechanical field rather than a contractor license.
Jacksonville
To register to pull permits, Jacksonville’s Building Inspection Division lists a “Construction license from the State of Florida” and “Proof of workers compensation insurance or exemption”. The JaxEPICS registration form takes that proof as an insurance certificate “issued to the City of Jacksonville as” certificate holder, or as an exemption certificate “from Florida workers compensation law”.
Hillsborough County
To keep a Local Specialty or State Registered license, Hillsborough County requires a “General liability certificate of insurance (COI)” and a “Worker’s Compensation certificate of insurance (COI) or exemption”, while “State Certified license holders are only required to update Worker’s Compensation information and license expiration date with Hillsborough County.”
Orlando
The City of Orlando says, “Contractors getting permits for work in the City of Orlando must be registered with the Permitting Services Division”, and warns that without updated documents on file “you will be unable to schedule inspections or move forward with your permit.” State-registered and limited specialty contractors also need a surety bond of at least the amount the City sets for their kind of license.
Pinellas County
Pinellas County’s Construction Licensing Board page says, “State-certified contractors are no longer required to register with the Pinellas County Construction Licensing Board”, and adds, “Any contractor working on or over water must also have USL&H insurance”.
Tallahassee
The City of Tallahassee’s contractor registration form asks for “A Certificate of General Liability Insurance, Workman’s Compensation Insurance, or a Workman’s Compensation Certification of Exemption”, naming the city’s Building Inspection office as certificate holder, and says, “Workman’s Compensation Certificates for out of state contractors must list Florida as a covered state”.
Fort Lauderdale
Fort Lauderdale asks a registering contractor to upload a “State License OR County Certificate of Competency”, “Liability Insurance” and a “Worker’s Comp Exemption Letter OR Certificate”, with the City of Fort Lauderdale listed as certificate holder on the workers’ compensation or liability insurance “(if applicable)”, and says, “Contractors with expired credentials will not be issued permits or be able to pay fees”.
The cards draw on Miami-Dade County’s contractor licensing page, the Broward County contractor packet, Jacksonville’s Building Inspection Division, Hillsborough County Development Services, the City of Orlando Permitting Services Division, the Pinellas County Construction Licensing Board, the City of Tallahassee contractor registration form and Fort Lauderdale Development Services.
Payment and performance bonds under § 255.05(1) and the stop-work order in § 440.107(7)(a)
Under § 255.05(1), a person entering into a formal contract with the state, a county, a city or another public authority for the construction of a public building, for a public work, or for repairs upon either must, before commencing the work, “execute and record in the public records of the county where the improvement is located, a payment and performance bond with a surety insurer authorized to do business in this state as surety.”
Chapter 440 enforces coverage with a stop-work order. Under § 440.107(7)(a), when the department finds an employer has failed to secure required coverage, that failure “shall be deemed an immediate serious danger to public health, safety, or welfare sufficient to justify service by the department of a stop-work order on the employer, requiring the cessation of all business operations.”
Read together, the § 489.115(5) affidavit and the liability certificates the county and city offices ask for sit on the general liability line; chapter 440, the § 440.103 permit proof and the exemption certificates sit on the workers’ compensation line; and Pinellas County’s rule for contractors working on or over water names USL&H insurance. The insulation contractor insurance overview sets out the full program, beside the pages for spray foam insurance and fiberglass insulation contractor insurance.
Through Wexford Insurance, LLC, an independent insurance agency, Insulation Contractor Insurance places coverage for insulation contractors. Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor. The quote form asks the state you are based in, what you install, your number of field employees and the coverage you want to talk about.
Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.
- Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.
A chart of what Florida requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: The state licensing agency’s own list names no insulation category. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The Florida Building Code, Energy Conservation, statewide, for residential and commercial buildings. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market; the law sets a threshold for which employers it covers. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.
Florida coverage, services and state offices
What we insure
Coverage lines
State offices
- Department of Business and Professional Regulation
- Construction Industry Licensing Board
- Florida Department of Financial Services, Division of Workers’ Compensation
- Florida Building Commission
- Florida Office of Insurance Regulation
- Division of State Fire Marshal
- Occupational Safety and Health Administration
- US EPA
- U.S. Consumer Product Safety Commission
Florida insulation contractor insurance questions
Florida contractor license requirements: what does the state licensing board’s list show for insulation?
The specialty contractor list on the Construction Industry Licensing Board’s page names no insulation category. Florida’s contracting statute names insulation inside other trades’ scopes: § 489.105(3)(d) puts insulation in the sheet metal contractor’s work on ferrous or nonferrous metal, and § 489.105(3)(f), (g) and (i) put insulation of pipes, vessels and ducts in the Class A and Class B air-conditioning and mechanical contractor scopes. The Department of Business and Professional Regulation says the Board “is responsible for licensing and regulating the construction industry”, so a question about your own scope of work goes to that Board.
Florida contractor registration: what do sections 489.105, 489.113 and 489.117 say about it?
Section 489.113(2) states, “A person must be certified or registered in order to engage in the business of contracting in this state.” Under § 489.105, a certified contractor may contract in any jurisdiction in the state without fulfilling that jurisdiction’s competency requirements, while registration rests on the competency requirements of the jurisdiction it is issued for, and “Registered contractors may contract only in such jurisdictions.” Section 489.117(4)(a) says a person whose job scope does not substantially correspond to a contractor category the statute defines, or to a board-rule specialty category, “is not required to register with the board.”
Is workers comp required in Florida for a contracting business with employees?
Florida’s workers’ compensation law is compulsory for the employers it covers; for private employment, including the construction industry, F.S. § 440.02(20)(b)2. reads: “2. All private employments in which four or more employees are employed by the same employer or, with respect to the construction industry, all private employment in which one or more employees are employed by the same employer.” Under § 440.10(1)(a), any contractor or subcontractor who engages in any public or private construction in the state must secure and maintain compensation for his or her employees as § 440.38 provides.
Florida workers comp exemption: who may hold one in a construction business?
The Division of Workers’ Compensation says, “Exemptions are issued to officers of a corporation and members of limited liability companies - not to the business.” It adds, “Upon issuance of an exemption, the officer or member is not considered an employee of the business and may not recover workers’ compensation benefits.” For a construction LLC, the applicant must attest to a minimum ownership share, and the Division limits how many officers may elect to be exempt. Under § 440.05(4), the certificate must state that it “is NOT a license issued by the Department of Business and Professional Regulation (DBPR).”
Florida energy code: which edition governs an insulation job today?
Under § 553.901, “The Florida Building Commission shall adopt the Florida Building Code-Energy Conservation”, a statewide uniform standard for energy efficiency in the thermal design and operation of all buildings statewide. For residential and commercial buildings alike, the edition in force is the Florida Building Code, Energy Conservation, 8th Edition (2023). The Florida Building Code, Energy Conservation, 9th Edition (2026) is in development. Under § 553.73(6), for a permit applied for before a new code’s effective date, the code in effect in the permitting jurisdiction on the date of the application governs the permitted work.
Florida spray foam insulation: which federal guidance speaks to the spraying itself?
The EPA says building occupants and other trade workers not involved in the SPF installation “should vacate the premises during installation of various types of SPF products in consultation with the contractor.” It also says, “When spray polyurethane foam is being used, the work site should be restricted to persons wearing appropriate personal protective equipment.” A U.S. Consumer Product Safety Commission fact sheet says, “Contractors should use safe work practices to reduce or prevent exposures to homeowners at every stage of SPF installation.”
Florida general liability insurance: which rules ask a contractor to prove it?
Under § 489.115(5)(a), an applicant for a state certificate or registration, or its renewal, submits an affidavit that it has obtained workers’ compensation insurance as chapter 440 requires, public liability insurance and property damage insurance, “in amounts determined by rule of the board.” Section 489.113(4)(c) lets a local government deny or suspend a building permit where a contractor fails or refuses to provide that proof. Pinellas County’s Construction Licensing Board advises verifying “valid General Liability and Workers’ Compensation insurance or Workers’ Compensation Exemption”.
This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.
Get a quote for your Florida insulation work
A Florida insulation business can start a quote by giving its home state, the materials it installs, the size of its field crew and the coverage it wants to talk through.