States we serve

Georgia Insulation Contractor Insurance

The State Licensing Board’s traditional specialty contractors policy statement lists “Insulation” in a list it says is “under development and subject to change”, and says “Traditional specialty contractors will not be required to carry a residential or general contractor license but will be required to comply with all applicable national, state, and local codes and ordinances.” Workers’ compensation is compulsory for the employers O.C.G.A. § 34-9-2(a)(2) reaches, Georgia has no state fund, and the Department of Community Affairs lists the International Energy Conservation Code with Georgia Supplements and Amendments among its current mandatory codes.

Get a Quote Call 317-942-0549

A worker in a hard hat pressing fiberglass batts into the wall framing of a gable-end attic — insulation contractor insurance in Georgia

An insulation contractor in Georgia meets a state licensing board whose traditional specialty contractors policy statement lists “Insulation”, a workers’ compensation chapter whose reach O.C.G.A. § 34-9-2(a)(2) sets by employee count, and an energy code the Georgia Department of Community Affairs lists statewide. On the insurance side, Augusta-Richmond County has contractors on permitted buildings file a certificate of insurance for public liability, Savannah tells owners to ask for proof of general liability and workers’ compensation, and the State Board of Workers’ Compensation answers “Does Georgia have a State Fund? No.” when asked about a state fund.

O.C.G.A. § 43-41-17(f) and the Board’s traditional specialty statement, read with its conditions

The traditional specialty contractors policy statement of the State Licensing Board for Residential and Commercial General Contractors lists “Insulation”, and it prefaces that list with “The following list is under development and subject to change.” Its central sentence reads “Traditional specialty contractors will not be required to carry a residential or general contractor license but will be required to comply with all applicable national, state, and local codes and ordinances.”

The statement marks where that exemption stops: “However, nothing in Chapter 41 shall permit a specialty contractor to perform work that falls within the licensing requirements of Chapter 14 of Title 43 where such specialty contractor is not duly licensed under such chapter to perform such work.”

O.C.G.A. § 43-41-17(f) sets the terms on which an exempt specialty contractor may take on other work for an owner: “The specialty contractor otherwise exempted from license requirements under this chapter may perform work for an owner that would otherwise require a license under this chapter where the total scope of the work to be performed is predominantly of the type for which such specialty contractor is duly recognized as exempt under this subsection by the board, provided that such other work involved is incidental to and an integral part of the exempt work performed by the specialty contractor and does not exceed the greater of $10,000.00 or 25 percent of the total value at the time of contracting of the work to be performed.” The Board’s frequently asked questions say “However, licenses are not required to perform work that qualifies as a specialty trade.”

The residential-basic, residential-light commercial and general contractor licenses under § 43-41-17(a)

O.C.G.A. § 43-41-17(a) reads “(a) No person, whether an individual or a business organization, shall have the right to engage in the business of residential contracting or commercial general contracting without a current, valid residential contractor license or commercial general contractor license, respectively, issued by the division under this chapter”. The Board’s FAQ adds “Different license types are required depending on the type of building/work you intend to perform.” The Board’s page offers how-to guides for “Residential Contractor Licensure” and “Commercial General Contractor Licensure”, and § 43-41-2(9) defines the residential contractor in terms of the residential-basic and residential-light commercial categories.

For holders of those licenses, the Board’s FAQ says “Insurance is a condition of applying for and maintaining licensure.” The Board’s rules ask applicants in the residential-basic and residential-light commercial categories and the general contractor division for proof of general liability insurance and of workers’ compensation insurance “as required by the laws of this state”. Those are conditions of the residential and general contractor licenses.

O.C.G.A. § 34-9-2(a)(2), employees “regularly in service” and the voluntary election to be bound

Georgia’s workers’ compensation chapter lists in O.C.G.A. § 34-9-2(a)(2) those it does not apply to, and the clause that bears on a small contractor reads “nor to any person, firm, or private corporation, including any public service corporation, that has regularly in service less than three employees in the same business within this state, unless such employees and their employers voluntarily elect to be bound;” The State Board of Workers’ Compensation’s insurance FAQ puts it from the employer’s side: “If you regularly employ three or more persons in your Georgia business, you are required to provide the benefits.” Its Law FAQ says “The law requires any business with three or more workers, including regular part-time workers, to have workers’ compensation insurance.”

The Board also says who is counted. “If your company is incorporated or an LLC, the officers or members are included in the employee count.” Asked whether part-time employees count, it answers “Yes, as long as they are regular or how you regularly do business.” Officers or members may waive coverage on themselves by completing and signing the Board’s waiver form and filing it with their insurance carrier, but “Officer exemptions do not reduce the number of employees of the corporation.” The Board adds that sole proprietors and partners are employers, not employees, and “can elect to be covered as an employee by advising their insurance carrier in writing.”

On enforcement, the Law FAQ says the Board “may assess a penalty” per violation “for an employer’s failure to be insured for workers’ compensation.” It adds “Any employer who refuses or willfully neglects to have workers’ compensation insurance shall be guilty of a misdemeanor.” For a Georgia insulation outfit, the line these rules touch is workers’ compensation.

The Board’s “No.” to “Does Georgia have a State Fund?”, and where its insurance FAQ sends rating questions

Asked “Does Georgia have a State Fund?”, the Board answers “No.”, and it says “The Georgia State Board of Workers’ Compensation does not sell workers’ compensation insurance.” The insurance FAQ names the administrator of the Georgia Workers’ Compensation Assigned Risk Plan, and it sends remaining rating questions to the Office of the Insurance Commissioner.

Self-insurance is its own route: “In order to be self-insured, you must be approved as a member of the Georgia Self-Insurers Guaranty Trust Fund and certified by the State Board of Workers’ Compensation.” The Fund’s members are self-insurers; the Board’s rules define a “Participant” as “a self-insurer who is a member of the Fund.”

For an employer that buys a policy, the Board’s rule on proof of coverage says “Every employer insured by a licensed insurer shall have proof of coverage documented by its insurer directly with a Licensed Rating Organization through their policy information system.” The same rule says “The proof of coverage documented with a Licensed Rating Organization is evidence that coverage is in effect until superseded or terminated.” Those sentences govern how a Georgia workers’ compensation policy is shown to be in force.

The Georgia State Minimum Standard Energy Code: REScheck, COMcheck and Passing Grade installation

On its current-codes page, under the heading “Current Mandatory Codes as Adopted by DCA”, the Georgia Department of Community Affairs lists the International Energy Conservation Code, 2015 Edition, with Georgia Supplements and Amendments. DCA’s Georgia supplements say “The INTERNATIONAL ENERGY CONSERVATION CODE, 2015 Edition, published by the International Code Council, when used in conjunction with these Georgia State Supplements, Amendments and any other Georgia State Amendments, shall constitute the official Georgia State Minimum Standard Energy Code.”

For houses, the supplements say “When following the REScheck compliance pathway, select the 2015 IECC as the code version.” For commercial work they say “When following the COMcheck compliance pathway, select either IECC 2015 or ASHRAE/IESNA Standard 90.1-2013.” They also state “The ‘Mandatory’ requirements of the IECC apply to all compliance methods.”, and on conflicts, “Where these Georgia State Supplements and Amendments conflict with either the IECC or ANSI/ASHRAE/IES Standard 90.1, these Georgia State Supplements and Amendments shall take precedence.”

On the envelope, the supplements require that “Underfloor insulation that makes up portions of the building thermal envelope shall be installed to Passing Grade quality.” DCA’s Appendix RA says “Wall and ceiling insulation that makes up portions of the building thermal envelope shall be installed to Passing Grade quality.”, and the supplements say “Appendices are not enforceable unless they are specifically referenced in the body of the code or adopted by the Department of Community Affairs or the authority having jurisdiction.”

A footnote to Georgia’s trade-off table says “Examples of air-impermeable insulation include spray foam and rigid foam board. Examples of air-permeable insulation include fiberglass batts and cellulose.” The footnote names spray foam among its air-impermeable examples and fiberglass batts among its air-permeable ones. In commercial duct sealing, the supplements say “Spray polyurethane foam shall be permitted to be applied without additional joint seals.”

A DCA notice of a proposed rule carries a new section on “Ductwork buried within ceiling Insulation”, and it says “If adopted by the Board of Community Affairs, the proposed rule would adopt the following Georgia Amendments to the INTERNATIONAL ENERGY CODE, 2015 Edition.” It is a proposal, not an adopted amendment.

Federal OSHA’s Atlanta East, Atlanta West and Savannah Area Offices and the EPA’s spray polyurethane foam checklist

OSHA’s Georgia area-office page says these federal OSHA offices cover private sector employers and workers in Georgia, and it lists the Atlanta East Area Office, the Atlanta West Area Office and the Savannah Area Office. Georgia appears on OSHA’s State Plans page as “GA”, with no asterisk, the mark that page gives a State Plan covering private as well as state and local government workplaces.

For a spray foam job, the EPA’s Contractor-Client Communications Checklist calls itself a voluntary aid to protect against potential risks from SPF and not a regulatory compliance tool, while noting that some of the best practices in it may be required under local, state or federal worker protection or other regulations. It tells clients to expect to vacate the work zone before application and not return until a period of time after it.

The Federal Trade Commission’s R-value rule reaches blown-in and batt crews as well as foam rigs: 16 CFR 460.17 has an installer give customers a contract or receipt for the insulation installed, dated and signed by the installer, and for loose-fill the receipt shows the coverage area, initial installed thickness, minimum settled thickness, R-value and number of bags used.

Savannah’s guide for owners and the Chatham, Augusta-Richmond, Athens-Clarke, Macon-Bibb and Gwinnett permit rules

Each card below repeats only what its own office states; none of these pages names insulation contractors.

Savannah

The City of Savannah Development Services Department’s contractor guide, written for property owners, says “The City of Savannah requires that certain trades work be done only by licensed contractors.” It tells owners to “Ask for proof of insurance”, saying “Worker’s compensation and general liability insurance are absolutely essential for a contractor.” The guide adds “Most home improvements, filling, fences, and other construction require a permit from the City of Savannah Development Services Department.”

Chatham County

For an alterations, repairs or remodel permit application, Chatham County’s Department of Building Safety & Regulatory Services asks for a “Copy of current State of Georgia license and local business license for general contractor and all subcontractors OR Homeowner Affidavit”, along with a “Subcontractor list with signatures”. The county’s application form asks the contractor for a “Local License #” and a “State License #”.

Augusta-Richmond County

Augusta-Richmond County’s permit page says “No permit, except for homeowners, shall be issued to anyone other than a properly licensed contractor under the laws of the State of Georgia and the ordinances of Augusta-Richmond County.” Its Construction Trade Regulation page has contractors who make contracts for buildings that need a permit “Place on file in the License and Inspection Department office a certificate of insurance for public liability and property damage”, and it requires a bond conditioned on work performed in accordance with the building code.

Athens-Clarke County

The Athens-Clarke County Building Permits and Inspections Department says “Licenses are available in Residential - Basic Contractor, Residential - Light Commercial Contractor, and General Contractor categories.” The department says it protects the public “by ensuring compliance with adopted codes”, among them codes on “Fire safety and other hazards associated with construction, alteration, removal, demolition, use or occupancy of buildings, structures, or property”.

Macon-Bibb County

Macon-Bibb County Building and Fire Safety’s building permits page says “To ensure that permits are issued solely to the license holder, the contractor’s account must be set up by the license holder.” The county’s residential dwelling submittal handout lists the International Energy Conservation Code, as the State of Georgia amends it, among the codes a new dwelling must meet at inspection.

Gwinnett County

Gwinnett County Planning and Development’s Building Services page says “After an applicant has successfully completed the plan review process, paid applicable fees, and provided contractor information, a construction permit is issued to the contractor of record.” Where an owner does the work, the page says “A homeowner may be issued a permit to perform such work on their property upon proof of ownership and will be required to submit a signed Property Owner as Contractor Affidavit.”

Sources: the Savannah guide, the Chatham County application, Augusta’s permit and trade regulation pages, and Macon-Bibb County’s permits page.

The Savannah guide, the Augusta certificate and § 34-9-2 sorted by coverage line

Savannah’s advice to owners and Augusta’s certificate for public liability and property damage point to general liability; § 34-9-2, the Board’s proof-of-coverage rule and the same Savannah advice point to workers’ compensation. A Georgia shop weighing its whole program can begin at the insulation contractor insurance page.

Through Wexford Insurance, LLC, an independent insurance agency, Insulation Contractor Insurance places coverage for insulation contractors. Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor. Your number of field employees, what you install, the state you are based in and the coverage you want to talk about are what the quote form asks.

Georgia: what the state sets for insulation work, what each rule leaves open, and the coverage page that discusses it.
Contractor license The state license does not reach insulation-only work
Injury and damage to others from the work, during the job and after it General Liability
Energy code The International Energy Conservation Code, statewide, for residential and commercial buildings
Damage the finished work causes after you leave General Liability
Workers’ compensation Required for covered employers, bought in the open market; the law sets a threshold for which employers it covers
A crew member hurt on the job Workers’ Compensation

Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong.

  • Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance.

A chart of what Georgia requires, in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor license: The state license does not reach insulation-only work. It leaves open injury and damage to others from the work, during the job and after it, which General Liability answers. Energy code: The International Energy Conservation Code, statewide, for residential and commercial buildings. It leaves open damage the finished work causes after you leave, which General Liability answers. Workers’ compensation: Required for covered employers, bought in the open market; the law sets a threshold for which employers it covers. It leaves open a crew member hurt on the job, which Workers’ Compensation answers. Notes: Where a state sets a license, a registration or an energy code, it is a requirement of the state, not insurance. The conclusion reads: Where a state sets rules on who may do the work or what it must meet, the policies still decide who pays when something goes wrong. No figures are shown.

Georgia insulation contractor insurance questions

Georgia contractor license requirements: what does the Board’s traditional specialty statement say about insulation?

The State Licensing Board for Residential and Commercial General Contractors lists “Insulation” in a traditional specialty list it says is “under development and subject to change”, and says “Traditional specialty contractors will not be required to carry a residential or general contractor license but will be required to comply with all applicable national, state, and local codes and ordinances.” The statement adds that “nothing in Chapter 41 shall permit a specialty contractor to perform work that falls within the licensing requirements” of the Chapter 14 trades where the contractor is not licensed under that chapter.

Is workers comp required in Georgia below the § 34-9-2(a)(2) employee count?

O.C.G.A. § 34-9-2(a)(2) says the workers’ compensation chapter shall not apply to certain employers, among them those described in this clause: “nor to any person, firm, or private corporation, including any public service corporation, that has regularly in service less than three employees in the same business within this state, unless such employees and their employers voluntarily elect to be bound;” The State Board of Workers’ Compensation’s insurance FAQ says “If you regularly employ three or more persons in your Georgia business, you are required to provide the benefits.”

Georgia workers comp exemption: can officers, LLC members or sole proprietors leave themselves off the policy?

The State Board of Workers’ Compensation says corporate officers or LLC members may waive coverage on themselves by completing and signing the Board’s waiver form and filing it with their insurance carrier, but “Officer exemptions do not reduce the number of employees of the corporation.” The Board says “The Georgia Law considers sole proprietors and partners to be employers not employees, just the opposite of corporations.”, and that they “can elect to be covered as an employee by advising their insurance carrier in writing.”

Georgia energy code: which code does the Department of Community Affairs list as current?

Under the heading “Current Mandatory Codes as Adopted by DCA”, the Georgia Department of Community Affairs lists the International Energy Conservation Code, 2015 Edition, with Georgia Supplements and Amendments. For houses, the Georgia supplements say “When following the REScheck compliance pathway, select the 2015 IECC as the code version.” For commercial work they say “When following the COMcheck compliance pathway, select either IECC 2015 or ASHRAE/IESNA Standard 90.1-2013.” The supplements also say “The ‘Mandatory’ requirements of the IECC apply to all compliance methods.”

Georgia insulation requirements: what do the state supplements say about how insulation is installed?

The Georgia supplements require that “Underfloor insulation that makes up portions of the building thermal envelope shall be installed to Passing Grade quality.” DCA’s Appendix RA says the same of wall and ceiling insulation, and the supplements say “Appendices are not enforceable unless they are specifically referenced in the body of the code or adopted by the Department of Community Affairs or the authority having jurisdiction.” They also say proper sealing around envelope penetrations “is as important to code compliance as are proper insulation R-values and component U-factors.”

Spray foam insulation Georgia: what do the state supplements and federal sources say about it?

In commercial duct sealing, the Georgia supplements say “Spray polyurethane foam shall be permitted to be applied without additional joint seals.” A footnote to Georgia’s trade-off table says “Examples of air-impermeable insulation include spray foam and rigid foam board.” OSHA’s Georgia page says its Atlanta East, Atlanta West and Savannah area offices cover private sector employers and workers in Georgia. The EPA calls its spray-foam contractor-client checklist a voluntary aid, not a regulatory compliance tool.

General liability insurance Georgia: which Georgia offices name it for a contractor?

The City of Savannah’s contractor guide tells property owners to “Ask for proof of insurance”, saying “Worker’s compensation and general liability insurance are absolutely essential for a contractor.” Augusta-Richmond County has contractors who contract for buildings that need a permit “Place on file in the License and Inspection Department office a certificate of insurance for public liability and property damage”. For licensed residential and commercial general contractors, the Board’s FAQ says “Insurance is a condition of applying for and maintaining licensure.”

This page describes insurance for insulation contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workers’ compensation and energy-code requirements change; verify current requirements with the agency named before relying on them.

Get a quote for your Georgia insulation work

A Georgia insulation quote starts with where your shop is based, what your crews install, the number of field employees you carry and which coverage you want to go over.

Get a Quote Call 317-942-0549