Cost Guides

Contractor Insurance Cost for Insulation Crews in North Dakota

An applicator in a coverall and respirator spraying white foam insulation onto the underside of a roof deck

In North Dakota, an insulation crew’s insurance cost divides along a legal line. Workers’ compensation is sold by North Dakota Workforce Safety & Insurance (WSI), which classifies the work, sets the rate and audits the payroll. Licensing, liability and vehicle lines sit beside it. No price appears here; each driver has its North Dakota source.

No private quotes: the fund fixes the price terms

Workers’ compensation cost begins with who sells the coverage. WSI’s page for out-of-state employers states that private insurers may not underwrite this coverage in the state and calls WSI “the sole provider”. Under Century Code § 65-04-04(1), the premium and assessment “must be determined by the classifications, rules, and rates made and published by the organization”, and Century Code § 65-04-01 directs the organization to classify employments according to hazard and set a premium rate for each class.

The statute also governs how the rates move. Century Code § 65-04-01 says “The organization shall establish premium rates annually on an actuarial basis.” and that before a premium rate change takes effect, “the organization shall hold a public hearing on the rate change.” A crew’s levers are therefore the facts the agency rates: the class assigned, the payroll reported, the audit result and the loss history.

The same fund reaches crews based elsewhere. WSI says “Any employer whose employment results in significant contacts with North Dakota, or enters into employment agreements in North Dakota must secure coverage with WSI.” Our North Dakota insulation contractor page has the rest of the state’s rules.

Where insulation sits in the manual, and the published base rate

WSI’s classification manual places insulation installation inside its building construction classification. The entry reads “Insulation - contractors installing or applying various types of acoustical or thermal insulating materials in buildings or within building walls.” The same classification “Includes on-site supervisors, on-site cleanup crews, and on-site debris removal.”

Pipe work is described elsewhere. The manual lists “Pipe and duct insulation - fiberglass application.” inside its boiler and elevator installation and service classification, so it describes that work under a different classification from insulation in buildings. The system is North Dakota’s own: the manual says “This manual utilizes classification codes unique to North Dakota and classification codes or systems utilized in other jurisdictions do not apply.” The manual also says “Employers should only rely on billing statements and written quotes from WSI for rate class assignments.” Our class code guide lays the state systems side by side.

WSI also publishes manual rates, and WSI’s rate sheet, headed “WORKFORCE SAFETY & INSURANCE MANUAL RATES - 2026 / 2027” and marked as prepared by Employer Services on April sixteenth, twenty twenty-six, prints the row “Building Construction 5410 3.38 3.39”, a published base rate, not a premium. WSI’s premium page says “The premium is calculated by applying the rate for a class of employment to the amount of taxable payroll in that classification.” and that where an account spans classifications, “your premium is the sum-total of all classifications.”

Payroll that counts, the cap on it and the year-end true-up

WSI says its premium “is based on the amount of remuneration paid to workers during the policy period.” By WSI’s list, remuneration includes commissions, bonuses, overtime pay, reportable tips and allowances, and WSI adds that “North Dakota law prohibits employers from deducting wages or otherwise billing workers for any part of the premium.”

Each worker’s taxable payroll is capped. WSI says the cap is a share of the state’s average annual wage and takes effect each year on the first of July. Reporting is quarterly for employers with a requirement of coverage, which WSI says lets employers “review, update, or add rate classes throughout the year”. A new account is billed on an estimate of the coming year’s payroll, and WSI says “At the end of the policy period, the premium is reconciled using the actual wages reported for the period.” Century Code § 65-04-16 describes the same adjustment from estimated to actual wage expenditure.

Owners are treated differently. WSI’s Coverage Types page lists an “Owner, partner, corporate officer” among those exempt from the workers’ compensation title, and, for an owner who elects coverage, says such coverage “will be charged an annual premium based upon the appropriate class rate multiplied by the maximum taxable payroll cap.”

Split payroll, or the highest class by default

For construction work, the manual ties the class to the crew’s paperwork. It divides payroll “for each separate and distinct type of construction or erection operation, which is specifically described by a classification, provided separate records of payroll are maintained”, unless a no-payroll-division qualification restricts a classification at a job or location. It adds that “Operations for which no separate records of payroll are maintained shall be assigned to the highest rate classification applicable to the job or location.”

An employee whose time spans classifications is treated the same way. The manual allows an employee’s payroll to be divided between classifications when the classifications properly belong to the employer and the employer “maintains proper payroll records, disclosing the actual payroll by classification for each impacted employee.” It says “An estimated or percentage allocation of payroll is not permitted” and “Such records must reflect the actual time spent working within each job classification.” For a crew that mixes insulation with another described operation, time sheets by type of work are what the rule asks for.

The premium audit and what it asks to see

WSI audits to check that workers are properly classified and that the right premium is paid. Its audit page says accounts are selected on “criteria including premium size, variances, and industry type”, and says “Employers may request an audit if they feel there should be changes in the classifications assigned to their employees.” WSI says it “will normally audit records for the most recently completed premium period.” WSI adds that noncompliance audits can reach further back.

The standard list shows what an insulation business should be able to produce. It includes “Payroll registers or individual earnings records”, “Business accounts payable check register”, “Job titles and job descriptions” and “Contractor license number”. Workers paid as contractors can change the result: WSI says “If WSI determines that independent contractors hired by the employer are actually employees, employers will be liable for related premiums.”

The statute adds its own terms. Century Code § 65-04-19(3) lets the organization calculate premium without employer-supplied wages when it does not receive the payroll report or reliable and accurate payroll information, and presumes accurate a calculation that uses the wage cap per employee from the previous payroll report, its investigative process or Job Service North Dakota data. Century Code § 65-04-19(4) says “Audit findings are applicable to the audited period and the subsequent payroll period only”, unless an audit referral is made for a potential violation of Century Code § 65-04-33.

Loss history, small-account programs and the early-report fee

WSI says “Experience rating is a projection of future losses using the employer’s past claims history.” Accounts qualify only after a stated number of years of North Dakota operations and a minimum premium over a look-back period, thresholds WSI posts on its experience rating page. WSI says “Employers with a poor loss history are charged premium above the manual rates.” For a crew, the claim count matters: “Claim frequency has more impact on the calculation because employers with more frequent claims represent a greater risk.”

Smaller accounts have their own program. WSI says the Small Account Credit/Debit program is for policyholders that do not qualify for experience rating, and that “The goal of this program is to create incentives for small businesses to manage their claims and implement safety programs.” The count of claims above a stated cost decides whether the account earns a credit, receives no adjustment, or takes a debit that grows with each further claim up to a maximum.

Other levers are optional. WSI says it “may offer premium dividends to eligible North Dakota employers”, and of its large deductible program it says “Since employers retain losses below the specified deductible amount, the total cost of such a plan is highly sensitive to losses.”

An employer also owes a share of each claim. WSI’s assessment page says “An employer is responsible for a portion of the medical expenses for each worker’s compensation claim filed”, and that it “may waive the assessment charge if an incident report or claim is filed with WSI by midnight (central time) of the next WSI business day following the injury date.”

When a subcontractor has no account: who owes the premium

Hiring labor as a contractor does not end the premium question. Under Century Code § 65-01-03, anyone who performs services for remuneration is presumed an employee unless independent contractor status is proven “under the common-law test”, and the person who asserts that status “has the burden of proving that fact.” Our independent contractor workers’ comp guide covers the labor-classification side.

For subcontractors, Century Code § 65-04-26.2 treats the workers of a subcontractor, and of an independent contractor working for a general contractor under an agreement, as employees of that general contractor too, along with any subcontractor that passed the work down. The general contractor and a subcontractor then answer for the premium and any penalty when the lower-tier business fails to secure the required coverage or pay what it owes, and that liability is “limited to work performed” for the hiring general contractor. Where the evidence shows the lower-tier business worked on multiple projects during the gap, subsection (3) has the organization set the share, and the statute caps it below the full amount. The section uses the definition of a contractor in Century Code § 43-07-01, and WSI’s page limits general contractor liability to the building construction trades.

Real-World Scenario: A Fargo general contractor engages an insulation subcontractor for a remodel, and the subcontractor has not opened a WSI account for its laborers. When WSI learns of the gap, Century Code § 65-04-26.2 makes the general contractor and the subcontractor liable for the premium and penalty on the work done under that contract, until the subcontractor pays. The contract price now sits beside a bill the general contractor did not plan for.

WSI calls it “best business practice” to request from every independent contractor or subcontractor a certificate of liability insurance, WSI’s Certificate of Payment or Verification of Nonemployment, a business registration with the Secretary of State and a contractor’s license, and its Employer Search tool is for checking whether a subcontractor has WSI coverage. The liability certificate is explained in the certificate of insurance guide. WSI’s page on failing to secure coverage tells an uninsured employer “you will be required to pay premium for the period you were not insured”, and Century Code § 65-04-27.2 sets a penalty for a general contractor or subcontractor that “knowingly uses the services of a subcontractor precluded from operating under a cease and desist order”.

Licensing paper, surplus lines and vehicles beside the fund

The Secretary of State license ties insurance paper to its file. Century Code § 43-07-04 has an applicant file a liability insurance certificate, and the Secretary of State’s contractor-license page notes that a business without employees residing in North Dakota, and not meeting the tests of significant contact, “must provide a letter of good standing from WSI.” The license guide asks whether the license reaches your work, and the bond guide takes up bonds.

A regulator’s description of liability premium base and audit is summarized in the Texas guide, and the general liability page describes what the policy is for. What North Dakota statute adds is a route for coverage the statute describes as not fully available from admitted insurers. Century Code § 26.1-44-03 allows surplus lines placement, where the insured’s home state is North Dakota, if among other conditions the producer is aware that “The full amount and type of insurance is not available from the insurers who are admitted to transact and are actually writing the particular type of insurance in this state if any are writing it”, or that the risk was referred by a licensed producer.

Vehicles have their own statute. Century Code § 39-08-20 bars driving, or letting someone drive, a motor vehicle in North Dakota “without a valid policy of liability insurance in effect”, in the amount the state’s financial responsibility chapter requires. Century Code § 39-08-20.2 says “However, special mobile equipment must be covered under a liability policy”, and has courts report violations involving equipment owned or operated by a contractor licensed under the state’s contractors chapter to the Secretary of State. For the vehicle policy itself, see the commercial auto page. The sources cited here do not separate spray foam work from fiberglass work.

What to have ready before an underwriter or WSI asks

Before you ask anyone for a quote, pull together payroll by kind of work with separate time records, the WSI Certificate of Payment that WSI says North Dakota law requires to be posted at the place of business, audit letters, loss history, vehicle and equipment lists, and the certificates and WSI proof your subcontractors hold. Then request a quote for the lines beside the fund.

How a North Dakota insulation crew’s insurance cost is built, from the state fund’s classes to the paper a license and a vehicle add.

The figure traces how a North Dakota insulation crew’s insurance cost accumulates. The state fund is the only seller of workers’ compensation and places the work in its own classification. Reported payroll is capped and reconciled, an audit tests the classes and the payroll, and loss history and safety programs adjust the premium. A hiring contractor can owe for an uncovered subcontractor, and license and vehicle paper sits beside the fund. No figures are shown.

Premium depends on payroll, the materials you spray or blow, subcontracted work, vehicles and rigs, tool and equipment values, and the states you work in. We do not publish typical rates because there is no such thing as a typical insulation contractor.

Frequently asked questions

Contractor insurance North Dakota cost: which parts of a crew’s program does WSI price?

WSI prices the workers’ compensation line, because state law keeps private insurers out of it. Century Code § 65-04-04 has the premium and assessment follow the classifications, rules and rates WSI publishes, and WSI’s pages tie those to the class assigned to your work, the payroll you report, any audit result and your loss history. This guide gives no price for any line.

Insulation contractor insurance cost North Dakota: is WSI’s published base rate what a crew pays?

No. A base rate is the figure WSI publishes for a class; the bill is built from it. WSI says “The premium is calculated by applying the rate for a class of employment to the amount of taxable payroll in that classification.” Payroll, an audit, experience rating or a small-account adjustment, and the medical assessment on claims all shape the bill, and the manual says to rely on WSI’s billing statements and written quotes for class assignments.

Contractor insurance rates: how does WSI set a North Dakota workers’ comp rate?

Century Code § 65-04-01 directs the organization to classify employments according to hazard and set a premium rate for each class, annually and on an actuarial basis, with a public hearing before any rate change takes effect. WSI says its rates “reflect factors such as occupational risk, medical costs, and benefit levels.” The rate belongs to the class, not to the individual crew, until loss history adjusts the premium.

North Dakota workers compensation monopolistic: does that leave a crew any way to shop its comp cost?

Not among insurers. WSI states that private insurers may not underwrite this coverage in the state. What a crew controls is what WSI rates: the classification assigned, the payroll reported with separate records by type of work, the audit file, the loss history, and the safety programs and large-deductible option WSI describes.

North Dakota workers compensation class codes: where does an insulation crew’s work sit?

WSI’s manual describes insulation installation in buildings inside its building construction classification, while pipe and duct insulation in fiberglass application is described under boiler and elevator installation and service. The manual warns that “classification codes or systems utilized in other jurisdictions do not apply.” Our class code guide sets North Dakota beside the other systems, and WSI’s billing statements and written quotes are what the manual tells employers to rely on for the assignment.

General liability insurance policy cost: what does a North Dakota contractor license change?

The license adds a filing, not a rating rule. Century Code § 43-07-04 has the applicant file a liability insurance certificate, and the Secretary of State’s contractor-license page says the insurance has to carry the name requested for the license. Those sources say what must be filed, not how the liability premium is priced, so the pricing drivers stay with the policy itself.

General contractor insurance cost: what do I owe when my insulation subcontractor has no WSI account?

Under Century Code § 65-04-26.2, the workers of a subcontractor, and of an independent contractor working for you under an agreement, count as your employees too, and you and the subcontractor answer for the premium and any penalty if the lower-tier business fails to secure coverage or pay. That liability is “limited to work performed” for that hiring contractor, and the statute caps the share when the gap spanned multiple projects. WSI says it may request your list of subcontractors at any time.

Construction insurance cost: what does a WSI premium audit change for a North Dakota crew?

WSI says it audits “to ensure that workers are properly classified and that employers are paying the appropriate premium.” Estimated payroll is reconciled to actual wages, a class can change, and WSI says “If WSI determines that independent contractors hired by the employer are actually employees, employers will be liable for related premiums.” Under Century Code § 65-04-19, findings apply to the audited period and the next payroll period, unless the audit is referred for a potential violation.