Coverage Explained

Insulation Class Code for Workers Comp: How Crews Are Rated

Gloved hands sealing the joint between two foil-wrapped insulated ducts in an attic

An insulation class code places a crew’s payroll in a workers’ compensation rating group, and the group’s rate drives the premium. New Jersey, Massachusetts, Michigan, Minnesota, Wisconsin and Ohio each print the trade as Insulation Work NOC. Pennsylvania and Delaware use a different number, and Washington and North Dakota classify it their own way.

What a class code does to a workers’ comp premium

A class code is a label for a kind of business, and the label carries a rate. Ohio’s statute shows the pieces in order. The Ohio Revised Code’s section on the administrator’s duties tells the administrator to “Classify occupations or industries with respect to their degree of hazard and determine the risks of the different classes according to the categories the national council on compensation insurance establishes that are applicable to employers in this state”, and then to “Fix the rates of premium of the risks of the classes based upon the total payroll in each of the classes of occupation or industry”.

The premium follows from those steps. Ohio’s premium section has private employers pay in, subject to the section’s own exceptions, an estimated annual premium that “the administrator fixes for the employment or occupation of the employer”, to be “determined by the classifications, rules, and rates made and published by the administrator”. It also has the administrator adjust the premium “for the difference between estimated gross payrolls and actual gross payrolls”. The estimate comes first, and the payroll report trues it up.

Washington’s Department of Labor & Industries explains the idea in its rule on the classification system. “We group industries that share similar risks together for common rating”, it says, and “By analyzing the history of injuries and costs for each classification grouping, we can reliably project future costs of claims for a classification.” It adds that “Employers engaged in higher hazard industries, such as logging, will pay higher premium rates than employers engaged in lower hazard businesses, such as retail store operations.” The class sets which pool of businesses your payroll is rated with.

Why the code follows the business, not the job

A class code goes to the business, not to each task. Washington’s department says “We do not classify and rate individual jobs or occupations”, and that each classification “describes the types of businesses and operations it includes”. The Minnesota Workers’ Compensation Insurance Association, in its basic manual, original printing effective July fifteenth, twenty twenty-six, gives the purpose: “The purpose of the classification system is to group employers with similar operations into classifications so that” the assigned classification reflects “the exposures common to those employers” and the rate charged reflects “the exposure to loss common to those employers”. Its next sentence reads “Subject to certain exceptions, it is the business of the employer within a state that is classified, not separate employments, occupations or operations within the business.”

Mixed work is where the rules matter. In the same manual, “The governing classification at a specific job or location is the basic classification, other than a standard exception classification, that produces the greatest amount of payroll.” A contractor whose crews do other kinds of work should ask how its own state’s manual treats the extra work.

Where the rating bureaus put insulation work

Each entry below is a state’s rating bureau, or in Michigan’s case its advisory organization, speaking from the page it publishes, not the state itself. Every one prints a line for insulation work, and each line is quoted here with the date the bureau’s page gives, or a note that the page gives none:

Pennsylvania and Delaware use almost the same label as the other bureaus, with a different number. A number belongs to the manual of the bureau that published it, so a crew that works across state lines can see different classification numbers for similar work.

The fine print that decides who gets the insulation code

The label is short, and the scope note under it does the sorting. Minnesota’s manual, printed with an effective date of July fifteenth, twenty twenty-six, says the insulation code “Includes the installation or application of acoustical or thermal insulating materials in buildings or within building walls.” That manual, dated July fifteenth, twenty twenty-six, gives the limit: “Applies only when insulation or acoustical work is performed as a separate operation not part of, or incidental to, any other construction operation performed by the same contractor at the same job or location.” The New Jersey, Massachusetts and Wisconsin listings carry the same limit, and so does the appendix to Ohio’s classification rule.

Read plainly, the code describes a contractor whose operation is insulation. Insulation put in as a part of another construction operation by the same contractor at the same job falls outside that wording, and where that payroll goes is a question for the manual and the carrier, not for a guess. Wisconsin’s listing for the code, posted to the web January fifteenth, twenty twenty-six, also carries the entry “SPRAYING OF INSULATING MATERIAL”, so spray application sits in the same listing there.

Pipe and boiler covering sits apart from the insulation code in the manuals quoted here. On the manual page marked effective May first, twenty seventeen, Massachusetts’s rating bureau lists “INSULATION - STEAM PIPE OR BOILER & DRIVERS” with the code “5183”. In the manual version dated September twenty-fifth, twenty twenty-six, Pennsylvania’s rating bureau puts under operations not included in its insulation class “Assign Code 663 to pipe covering or insulation work including asbestos encapsulation or removal.” If your crew wraps pipe or boilers, ask which line applies.

Washington writes its own insulation class

Washington does not use the number the bureaus print. Its Department of Labor & Industries is where an employer buys the coverage unless it is certified to self-insure, and the department says “Washington State does not allow private workers’ compensation coverage. You must purchase your coverage from L&I or be a certified self-insured employer.” The Washington page sets out that rule.

In its classification rule, effective July first, twenty sixteen, the department defines “0512-00 Insulation or sound proofing materials: Installation, N.O.C.” The class, under that rule dated July first, twenty sixteen, “includes the installation or removal of insulation material for all types of residential or commercial buildings or structures”. The same rule names “Loose fills or mineral substances in granulated, powder, cellulose or fibrous wood forms” among the materials and says “The methods of installation include hand, blower, nailing, or cementing with special adhesive.” That is the rule’s own list, and the rule says its list is not limited to those materials, so blown-in cellulose falls within its wording, along with the blanket, roll and bat forms it lists, while the rule’s text does not name spray foam.

The same rule, effective July first, twenty sixteen, carves out what it does not cover. It excludes “Asbestos abatement which is to be reported separately in classification 0512-01” and “Installation of insulated covering on boilers or steam pipes which is to be reported separately in classification 0306.” The department’s rate list by business type for twenty twenty-six names the broader class “0512 Insulation Installation and Asbestos Abatement Work”. A Washington crew that also removes asbestos-containing material has separate classifications in play.

North Dakota files insulation under building construction

In North Dakota, insulation has no class of its own. Workforce Safety & Insurance, the state’s workers’ compensation organization, says in its manual that it “utilizes classification codes unique to North Dakota and classification codes or systems utilized in other jurisdictions do not apply.” In that manual, effective July first, twenty twenty-six, the index sends “5410 Insulation installation” to a building construction class, and the class “5410 BUILDING CONSTRUCTION” lists among its inclusions “Insulation - contractors installing or applying various types of acoustical or thermal insulating materials in buildings or within building walls.”

The manual, effective July first, twenty twenty-six, puts pipe and duct work elsewhere: it indexes “5110 Pipe and duct insulation – fiberglass application”. For construction crews, the North Dakota manual dated July first, twenty twenty-six, sets a payroll rule: “division of payroll shall be made for each separate and distinct type of construction or erection operation, which is specifically described by a classification, provided separate records of payroll are maintained”, and “Operations for which no separate records of payroll are maintained shall be assigned to the highest rate classification applicable to the job or location.” Coverage there comes from that organization alone, which says in its coverage requirements “North Dakota law does not allow private insurers to underwrite workers’ compensation insurance in North Dakota.” The statute behind the classes says “The organization shall classify employments with respect to their degrees of hazard, determine the risks of different classifications, and fix the rate of premium for each of the classifications”. The North Dakota page has more.

Ohio and Wyoming classify through state agencies too

Ohio’s administrator sets classifications by rule. The Ohio Administrative Code says “The administrator hereby establishes the following classifications of occupations or industries”, in a rule effective July first, twenty twenty-six, and the rule’s appendix lists “Insulation work NOC & drivers” at “5479” in its alphabetical index. An Ohio employer is covered through the state fund unless it qualifies to self-insure; the Ohio page sets out that route.

Wyoming classifies by industry system, not by a bureau manual. The state’s Department of Workforce Services states “Workers’ Compensation premium rates are based on your business classification under the North American Industry Classification System (NAICS).” It adds that “Classifications and the rates tied to them are determined after your employer registration is submitted through WYUI.wyo.gov. Once your information is reviewed, DWS will assign the appropriate classification to ensure your coverage and rates are accurate.” That page names no insulation class. The Wyoming page holds the state’s coverage rules.

Keeping your payroll in the right class

A class is only as accurate as the description behind it. North Dakota’s manual says “Rate classifications are assigned based on information received from you, the employer, and are subject to change based on confirmation of the information received, new information, or an audit conducted by WSI.” It adds “Employers should only rely on billing statements and written quotes from WSI for rate class assignments.” In Minnesota, the association says it “may determine the propriety of classification assignments and applicability of all Minnesota Basic Manual rules”, and that “Appeals involving the application of the rules or classifications of this manual may be resolved through the applicable administrative appeals process.”

Washington’s recordkeeping rule shows what an auditor wants to see. It “requires every employer to make, keep, and preserve records which are adequate to facilitate the determination of premiums due to the state for workers’ compensation insurance for their covered workers”, including “The risk classification applicable to each worker whenever the worker hours of any one employee are being divided between two or more classifications”.

Real-World Scenario: A Washington crew blows cellulose into attics all spring, and in the summer the same company takes a job removing old asbestos-containing insulation from a building. The cellulose payroll fits the department’s insulation class, whose scope names loose fills and blowers. The removal payroll belongs to the separate abatement class the same rule names. The owner who kept hours by worker and by kind of work can show the auditor which wages belong where, and an owner who kept only a grand total has given the auditor less to work from.

To bring to a quote: your state, your crew’s kinds of work in plain words, payroll for each, and the classification any current policy shows. Our workers’ compensation page explains the policy itself, and independent contractors and workers’ comp covers who counts as payroll. The pages on fiberglass insulation contractor insurance and on spray foam insurance cover the work behind each class. Put those facts in a quote request and the classification can be read against your state’s manual.

From a crew’s payroll to a workers’ compensation premium: where the classification sits in the chain.

A flow from a crew’s payroll to its workers’ compensation premium. Payroll is kept by kind of work, the rating bureau’s or state fund’s manual places the business in a classification by its scope wording, the classification carries a rate, the estimated premium is built from payroll and rate, and an audit compares estimated payroll with actual payroll. No figures are shown.

Frequently asked questions

Insulation class code workers comp: what does the code do to the premium?

It decides which rate your payroll is multiplied by. Ohio’s statute has the administrator classify occupations and industries by degree of hazard and “Fix the rates of premium of the risks of the classes based upon the total payroll in each of the classes of occupation or industry”. Washington’s department says it groups industries that share similar risks “together for common rating”. The class does not set the final bill alone, because the premium is adjusted to actual payroll once the payroll report is in.

What is a class code for workers compensation, and who assigns it to an insulation crew?

A class code is a label for a kind of business, and the party that assigns it depends on the state. Minnesota’s rating association says the classification system groups “employers with similar operations into classifications”. In North Dakota, Workforce Safety & Insurance says classifications are assigned “based on information received from you, the employer”. In Wyoming, the Department of Workforce Services states it will “assign the appropriate classification” after registration.

Insulation workers comp code: is the number the same in every state?

No. The rating bureaus in New Jersey, Massachusetts, Minnesota and Wisconsin, and Michigan’s advisory organization, print the trade as insulation work NOC, and Ohio’s rule lists it the same way, while Pennsylvania and Delaware label it “Insulation Work, N.O.C.” under a different number. Washington has its own insulation class, and North Dakota’s manual says its codes are “unique to North Dakota” and that codes “utilized in other jurisdictions do not apply”. Read the manual of the state you are rating in.

Insulation workers comp code: which states classify through a state agency instead of a rating bureau?

Washington and North Dakota publish their own classifications, Ohio’s administrator sets classifications by rule from “the categories the national council on compensation insurance establishes”, and Wyoming classifies by industry system. North Dakota’s Workforce Safety & Insurance says “North Dakota law does not allow private insurers to underwrite workers’ compensation insurance in North Dakota”, and Washington’s department says “Washington State does not allow private workers’ compensation coverage”, with a self-insurance route. Ohio employers pay into a state fund unless they qualify to self-insure. Our state pages set out each rule.

Insulation class code workers comp: what if my crew does other work too?

Where the work is different enough, a manual may split the payroll, but only with records. North Dakota’s manual says payroll is divided when “separate records of payroll are maintained”, and otherwise assigns the work to “the highest rate classification applicable to the job or location”. Minnesota’s manual names a governing classification, the one that “produces the greatest amount of payroll”. Ask your carrier or fund how the manual in your state treats mixed work.

What is a class code for workers compensation: what can I do if I think my crew is in the wrong one?

Ask for the classification in writing, then compare its wording with your work. Minnesota’s manual says its rating association “may determine the propriety of classification assignments” and that appeals “may be resolved through the applicable administrative appeals process”. North Dakota’s manual says classifications are subject to change after confirmation, new information or an audit, and tells employers to rely on “billing statements and written quotes from WSI”. Keep payroll records by kind of work.